Inbound Call On 5 Extensions

Any and all non-support discussions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Inbound Call On 5 Extensions

Postby farhan.nazim » Mon Jul 15, 2019 1:43 am

I want to received call at a time 5 extensions means if incoming call is landed on did rings all 5 Phones extensions at a time with recording this call .
i have a DID and DID call route to phones. i don't send call on campaign
farhan.nazim
 
Posts: 4
Joined: Fri Jul 12, 2019 7:47 am

Re: Inbound Call On 5 Extensions

Postby williamconley » Mon Jul 15, 2019 9:11 pm

1) Welcome to the Party! 8-)

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method (7.X.X?) and vicidial version with build (VERSION: 2.X-XXXx ... BUILD: #####-####).

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "manual/from scratch" you must post your operating system with version (and the .iso version from which you installed your original operating system) plus a link to the installation instructions you used. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) Vicidial usually uses Logged In Agents to receive calls (inbound or outbound autodialed). Those agents, once logged in, can be "onhook" agents which means their phones will ring when they get a call (for inbound only). With onhook agents in an ingroup, the ingroup can be set to "Ring All". This is all covered in the manual.

4) However, you may consider looking at FreePBX which is a much simpler system for some people who don't have autodial needs.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to General Discussion

Who is online

Users browsing this forum: No registered users and 84 guests