Callerid
Posted: Fri May 13, 2011 12:16 pmHow do you use the callerid of the called party as the callerid when you transfer a call to another pbx?
try
hidecallerid=no in the sip settings.
vicidial.org
VICIDIAL astGUIclient discussion forum
http://forum.eflo.net/VICIDIALforum/
Callerid
http://forum.eflo.net/VICIDIALforum/viewtopic.php?f=2&t=18286
Page 1 of 1
Posted: Fri May 13, 2011 12:16 pmcallerid
Posted: Sat May 14, 2011 11:42 amPosted: Sun May 15, 2011 12:02 ami want to alter the callerid with the callerid of the called party like i am talking to someone on a number 123456, when i want to transfer a call to another number i want the caller id 123456 to register instead of my callerid when calling the number to transfer the call to
Posted: Mon May 16, 2011 5:34 pmIf you're using Vicidial version 2.2 and up you can check the "3-Way Call Outbound CallerID" settings in your Campaign settings. 
Posted: Tue May 17, 2011 1:13 amits also on 2.4, any ideas how to do it automatically
Posted: Tue May 17, 2011 4:09 pmAs I said 2.2 and up (which includes 2.4). It's all automatic if you follow my advice and set your "3-Way Call Outbound CallerID" in the campaign settings.
Posted: Tue May 17, 2011 7:59 pmok thanks
Re:
Posted: Wed Oct 10, 2012 7:53 amgardo wrote:If you're using Vicidial version 2.2 and up you can check the "3-Way Call Outbound CallerID" settings in your Campaign settings.
Hi Admins, sorry for bumping this old thread. I am trying to set up a caller ID like the one above mentioned. Two quick questions please.
1. Just to clarify, is this feature only possible at 2.2 and above?
2. How do we check the vici version? I search everywhere but there's no command online that shows you how to do this. I have root access to the server by the way.
Re: Callerid
Posted: Wed Oct 10, 2012 8:53 ampost the version and build from the admin.php webpage.
Re: Callerid
Posted: Tue Nov 27, 2012 1:04 pmThe Vicidial Version is listed on almost every Administration page in the lower left corner. Unfortunately in some GoAutoDial installed versions of Vicidial, the fact that this is "Vicidial version XXX" is not obvious as the GoAutoDial logo has been inserted above the Version information. However: If you are in Vicidial and you see a Version ... it's the Vicidial version.
Re: Callerid
Posted: Thu Nov 29, 2012 4:29 pmHi guys,
I have followed your instructions about the "3-Way Call Outbound CallerID" you mentioned here. The "3-Way Call Outbound CallerID" field is set to "CUSTOMER" so if the call is transferred, the person who received the transferred call should see the phone number of the called party right?
But what could be the problem if the first digit is seen like somewhat replaced? Like you called "1234567890" then you transferred the call and the receiver sees "D234567890". Sometimes it's the UID that is being displayed.
I have followed your instructions about the "3-Way Call Outbound CallerID" you mentioned here. The "3-Way Call Outbound CallerID" field is set to "CUSTOMER" so if the call is transferred, the person who received the transferred call should see the phone number of the called party right?
But what could be the problem if the first digit is seen like somewhat replaced? Like you called "1234567890" then you transferred the call and the receiver sees "D234567890". Sometimes it's the UID that is being displayed.
Re: Callerid
Posted: Thu Nov 29, 2012 11:35 pm1) Welcome to the Party! 
2) Please state the precise step by step description of how you are transferring the calls, and the path that they are taking. (Button for button during the transfer as well ...)
3) when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.
this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)
You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.
If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.
Similar to This:
Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600
2) Please state the precise step by step description of how you are transferring the calls, and the path that they are taking. (Button for button during the transfer as well ...)
3) when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.
this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)
You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.
If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.
Similar to This:
Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600
Re: Callerid
Posted: Fri Nov 30, 2012 3:27 pm///// | VERSION: 2.6-370a BUILD: 120529-2112 | 1.4.38-vici | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | AMD Athlon(tm) II X2 215 Processor
where can i see or how would i know the first field sir?
what's the field before the processor sir?
----------
first, i can either manually call a phone number or wait until the predictive dialing passes a call.
then i click "park call" button.
then "transfer-conf" button.
some buttons and options appear bellow.
the field "number to call" is prepopulated by a certain number so all i have to do is click the "dial with customer" button.
phone number rings. call connected. then the receiver of the transferred call is supposed to see the phone number of the person i called.
and that's where the problem is, the receiver sees some alphanumeric set of characters and the phone number underneath it which, they said, is supposed to be just the phone number of the person i called.
then at the end of conversation, i can either hangup both lines or leave 3-way call.
where can i see or how would i know the first field sir?
what's the field before the processor sir?
----------
first, i can either manually call a phone number or wait until the predictive dialing passes a call.
then i click "park call" button.
then "transfer-conf" button.
some buttons and options appear bellow.
the field "number to call" is prepopulated by a certain number so all i have to do is click the "dial with customer" button.
phone number rings. call connected. then the receiver of the transferred call is supposed to see the phone number of the person i called.
and that's where the problem is, the receiver sees some alphanumeric set of characters and the phone number underneath it which, they said, is supposed to be just the phone number of the person i called.
then at the end of conversation, i can either hangup both lines or leave 3-way call.
Re: Callerid
Posted: Fri Nov 30, 2012 5:27 pmmareconvy wrote:where can i see or how would i know the first field sir?
Ordinarily in the "splash/welcome screen" when you log in via ssh.
You already listed the processor, but you can also try "cat /var/log/boot.msg | grep CPU0" and also (for the motherboard) "dmidecode | grep Product"mareconvy wrote:what's the field before the processor sir?
mareconvy wrote:first, i can either manually call a phone number or wait until the predictive dialing passes a call.
then i click "park call" button.
then "transfer-conf" button.
some buttons and options appear bellow.
the field "number to call" is prepopulated by a certain number so all i have to do is click the "dial with customer" button.
phone number rings. call connected. then the receiver of the transferred call is supposed to see the phone number of the person i called.
and that's where the problem is, the receiver sees some alphanumeric set of characters and the phone number underneath it which, they said, is supposed to be just the phone number of the person i called.
then at the end of conversation, i can either hangup both lines or leave 3-way call.
Campaign settings Check:
Manual Dial CID
3-Way Call Outbound CallerID (perhaps try "agent choose" and see if that has an effect?)
What dial plan is being used to connect these calls? Can you show the command line interface output from Asterisk to show an example of a "bad" result?
Re: Callerid
Posted: Fri Nov 30, 2012 7:41 pmViciBox Redux v.3.1.10 released
cat /var/log/boot.msg | grep CPU0 = "<6>[ 0.179901] CPU0: AMD Athlon(tm) II X2 215 Processor stepping 02"
dmidecode | grep Product = "Product Name: N61PB-M2S
Product Name: N61PB-M2S"
-----------------------------------------------------------------------------------------------------------------------------------
Manual Dial CID = CAMPAIGN
3-Way Call Outbound CallerID = CUSTOMER
by the way, the receiver sees those things on eyebeam.
I've tried using another server and got the same results.
i also tried dialing a number and transfer it to our inbound number but it was okay on vicidial agent user interface.
i am not just sure if there's a difference sending callerID to a softphone and vicidial interface.
i'll try to test a call with a previous setting for Manual Dial CID and 3-Way Call Outbound CallerID then get the asterisk logs. then try another test call with the setting that you mentioned. i will then post the results.
cat /var/log/boot.msg | grep CPU0 = "<6>[ 0.179901] CPU0: AMD Athlon(tm) II X2 215 Processor stepping 02"
dmidecode | grep Product = "Product Name: N61PB-M2S
Product Name: N61PB-M2S"
-----------------------------------------------------------------------------------------------------------------------------------
Manual Dial CID = CAMPAIGN
3-Way Call Outbound CallerID = CUSTOMER
by the way, the receiver sees those things on eyebeam.
I've tried using another server and got the same results.
i also tried dialing a number and transfer it to our inbound number but it was okay on vicidial agent user interface.
i am not just sure if there's a difference sending callerID to a softphone and vicidial interface.
i'll try to test a call with a previous setting for Manual Dial CID and 3-Way Call Outbound CallerID then get the asterisk logs. then try another test call with the setting that you mentioned. i will then post the results.
Re: Callerid
Posted: Fri Nov 30, 2012 8:12 pmhere's the asterisk log before i change the "3-Way Call Outbound CallerID"
- Code: Select all
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [8600071@default:1] MeetMe("Local/8600071@default-38e1,2", "8600071|F") in new stack
-- Executing [912127773456@default:1] AGI("Local/8600071@default-38e1,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing [912127773456@default:2] Dial("Local/8600071@default-38e1,1", "SIP/globalan/12127773456||tTo") in new stack
-- Called globalan/12127773456
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [58600071@default:1] MeetMe("Local/58600071@default-3aab,2", "8600071|Fmq") in new stack
-- Executing [8309@default:1] Answer("Local/58600071@default-3aab,1", "") in new stack
-- Executing [8309@default:2] Monitor("Local/58600071@default-3aab,1", "wav|2127773456_20121201-090720_agent17") in new stack
-- Executing [8309@default:3] Wait("Local/58600071@default-3aab,1", "3600") in new stack
-- SIP/globalan-00002917 is making progress passing it to Local/8600071@default-38e1,1
== Manager 'sendcron' logged off from 127.0.0.1
-- SIP/globalan-00002917 answered Local/8600071@default-38e1,1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [h@default:1] DeadAGI("Local/8600071@default-38e1,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----3-----1") in new stack
[Dec 1 09:07:24] WARNING[24276]: res_agi.c:2212 deadagi_exec: Running DeadAGI on a live channel will cause problems, please use AGI
-- Executing [8301@default:1] Answer("SIP/globalan-00002917", "") in new stack
-- Executing [8301@default:2] AGI("SIP/globalan-00002917", "park_CID.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/park_CID.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 8301, 0) exited non-zero on 'Local/8600071@default-38e1,2'
-- Executing [8301@default:1] Answer("Local/8600071@default-38e1,2", "") in new stack
-- Executing [8301@default:2] AGI("Local/8600071@default-38e1,2", "park_CID.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/park_CID.agi
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Started music on hold, class 'default', on SIP/globalan-00002917
-- Started music on hold, class 'default', on Local/8600071@default-38e1,2
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----3-----1 completed, returning 0
== Spawn extension (default, 912127773456, 2) exited non-zero on 'Local/8600071@default-38e1,1'
-- Stopped music on hold on Local/8600071@default-38e1,2
== Spawn extension (default, 8301, 2) exited non-zero on 'Local/8600071@default-38e1,2'
-- Executing [h@default:1] DeadAGI("Local/8600071@default-38e1,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [918885016479@default:1] AGI("Local/918885016479@default-bf0d,2", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing [918885016479@default:2] Dial("Local/918885016479@default-bf0d,2", "SIP/globalan/18885016479||tTo") in new stack
-- Called globalan/18885016479
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
-- SIP/globalan-00002918 is making progress passing it to Local/918885016479@default-bf0d,2
-- SIP/globalan-00002918 answered Local/918885016479@default-bf0d,2
-- Executing [8600071@default:1] MeetMe("Local/918885016479@default-bf0d,1", "8600071|F") in new stack
-- Executing [h@default:1] DeadAGI("Local/918885016479@default-bf0d,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----2-----0") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----2-----0 completed, returning 0
== Spawn extension (default, 918885016479, 2) exited non-zero on 'Local/918885016479@default-bf0d,2'
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 8600071, 1) exited non-zero on 'SIP/globalan-00002918'
-- Executing [h@default:1] DeadAGI("SIP/globalan-00002918", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 58600071, 1) exited non-zero on 'Local/58600071@default-3aab,2'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-3aab,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600071@default-3aab,1'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-3aab,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
Re: Callerid
Posted: Fri Nov 30, 2012 8:22 pmhere's the asterisk log after changing "3-Way Call Outbound CallerID" to "AGENT_CHOOSE"
still the same results sir.
here's the dial plan we use
- Code: Select all
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 58600071, 1) exited non-zero on 'Local/58600071@default-d096,2'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-d096,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600071@default-d096,1'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-d096,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- AGI Script agi-VDAD_ALL_inbound.agi completed, returning 0
-- Executing [990009***2698346**2127773456*agent17*8885016479*@default:3] Hangup("SIP/globalan-0000291f", "") in new stack
== Spawn extension (default, 990009***2698346**2127773456*agent17*8885016479*, 3) exited non-zero on 'SIP/globalan-0000291f'
-- Executing [h@default:1] DeadAGI("SIP/globalan-0000291f", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [8600071@default:1] MeetMe("Local/8600071@default-27c9,2", "8600071|F") in new stack
-- Executing [912127773456@default:1] AGI("Local/8600071@default-27c9,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing [912127773456@default:2] Dial("Local/8600071@default-27c9,1", "SIP/globalan/12127773456||tTo") in new stack
-- Called globalan/12127773456
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [58600071@default:1] MeetMe("Local/58600071@default-070c,2", "8600071|Fmq") in new stack
-- Executing [8309@default:1] Answer("Local/58600071@default-070c,1", "") in new stack
-- Executing [8309@default:2] Monitor("Local/58600071@default-070c,1", "wav|2127773456_20121201-091548_agent17") in new stack
-- Executing [8309@default:3] Wait("Local/58600071@default-070c,1", "3600") in new stack
-- SIP/globalan-00002920 is ringing
-- SIP/globalan-00002920 answered Local/8600071@default-27c9,1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 8301, 0) exited non-zero on 'Local/8600071@default-27c9,2'
-- Executing [8301@default:1] Answer("Local/8600071@default-27c9,2", "") in new stack
-- Executing [8301@default:2] AGI("Local/8600071@default-27c9,2", "park_CID.agi") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/park_CID.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [h@default:1] DeadAGI("Local/8600071@default-27c9,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----2-----1") in new stack
[Dec 1 09:15:51] WARNING[25628]: res_agi.c:2212 deadagi_exec: Running DeadAGI on a live channel will cause problems, please use AGI
-- Executing [8301@default:1] Answer("SIP/globalan-00002920", "") in new stack
-- Executing [8301@default:2] AGI("SIP/globalan-00002920", "park_CID.agi") in new stack
== Manager 'sendcron' logged off from 127.0.0.1
-- Launched AGI Script /var/lib/asterisk/agi-bin/park_CID.agi
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Started music on hold, class 'default', on Local/8600071@default-27c9,2
-- Playing 'sip-silence' (escape_digits=) (sample_offset 0)
-- Started music on hold, class 'default', on SIP/globalan-00002920
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----2-----1 completed, returning 0
== Spawn extension (default, 912127773456, 2) exited non-zero on 'Local/8600071@default-27c9,1'
-- Stopped music on hold on Local/8600071@default-27c9,2
== Spawn extension (default, 8301, 2) exited non-zero on 'Local/8600071@default-27c9,2'
-- Executing [h@default:1] DeadAGI("Local/8600071@default-27c9,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
== Refreshing DNS lookups.
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [918885016479@default:1] AGI("Local/918885016479@default-8f74,2", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing [918885016479@default:2] Dial("Local/918885016479@default-8f74,2", "SIP/globalan/18885016479||tTo") in new stack
-- Called globalan/18885016479
-- SIP/globalan-00002921 is making progress passing it to Local/918885016479@default-8f74,2
-- SIP/globalan-00002921 answered Local/918885016479@default-8f74,2
-- Executing [8600071@default:1] MeetMe("Local/918885016479@default-8f74,1", "8600071|F") in new stack
-- Executing [h@default:1] DeadAGI("Local/918885016479@default-8f74,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----3-----0") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----3-----0 completed, returning 0
== Spawn extension (default, 918885016479, 2) exited non-zero on 'Local/918885016479@default-8f74,2'
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 8600071, 1) exited non-zero on 'SIP/globalan-00002921'
-- Executing [h@default:1] DeadAGI("SIP/globalan-00002921", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Spawn extension (default, 58600071, 1) exited non-zero on 'Local/58600071@default-070c,2'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-070c,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600071@default-070c,1'
-- Executing [h@default:1] DeadAGI("Local/58600071@default-070c,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Hungup 'DAHDI/pseudo-747300062'
== Spawn extension (default, 8600071, 1) exited non-zero on 'SIP/1017-0000291e'
-- Executing [h@default:1] DeadAGI("SIP/1017-0000291e", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing [55558600071@default:1] MeetMeAdmin("Local/55558600071@default-4159,2", "8600071|K") in new stack
[Dec 1 09:17:07] WARNING[25860]: app_meetme.c:3134 admin_exec: Conference number '8600071' not found!
-- Executing [55558600071@default:2] Hangup("Local/55558600071@default-4159,2", "") in new stack
== Spawn extension (default, 55558600071, 2) exited non-zero on 'Local/55558600071@default-4159,2'
-- Executing [h@default:1] DeadAGI("Local/55558600071@default-4159,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
-- Stopped music on hold on SIP/globalan-00002920
== Spawn extension (default, 8301, 2) exited non-zero on 'SIP/globalan-00002920'
-- Executing [h@default:1] DeadAGI("SIP/globalan-00002920", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
still the same results sir.
here's the dial plan we use
- Code: Select all
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,n,Dial(SIP/globalan/${EXTEN:1},,tTo)
exten => _91NXXNXXXXXX,n,Hangup
Re: Callerid
Posted: Sun Dec 02, 2012 2:17 pmHave you tried it without parking the customer?
Re: Callerid
Posted: Mon Dec 03, 2012 11:18 amnope. it is needed to park the customer first before transferring the call. some kind of call protocol.
Re: Callerid
Posted: Mon Dec 03, 2012 10:37 pmperhaps you should try it as a test ...
Re: Callerid
Posted: Wed Dec 05, 2012 9:27 amhi.
we tried changing voip provider and the problem was solved. i guess it is something with the location of the provider or something. like when the call passes through a voip provider that is based in Canada, the callerID sent contains the name and number or UID and phone number. a more experienced voip administrator told me about that.
i'm not sure either
but now, we are facing a different problem after that.
most of the calls are timed out and an error appears saying "dial time out. contact your administrator".
i may have changed some fields on the campaign settings or sip settings. i'm not sure.
i'm already looking for similar issues in the forums. i guess i'd be joining the other conversations as well.
thank you so much for all the help sir. i really appreciate it
we tried changing voip provider and the problem was solved. i guess it is something with the location of the provider or something. like when the call passes through a voip provider that is based in Canada, the callerID sent contains the name and number or UID and phone number. a more experienced voip administrator told me about that.
i'm not sure either
but now, we are facing a different problem after that.
most of the calls are timed out and an error appears saying "dial time out. contact your administrator".
i may have changed some fields on the campaign settings or sip settings. i'm not sure.
i'm already looking for similar issues in the forums. i guess i'd be joining the other conversations as well.
thank you so much for all the help sir. i really appreciate it
Re: Callerid
Posted: Wed Dec 05, 2012 12:13 pmlook at the command line interface in asterisk when the call is generated. this will contain the details of the generation of the call and the response from the provider which often contains a reason for call death (even if it doesn't contain a valid reason, at least it tells you that the provider killed the call, not your vicidial server's control).
Re: Callerid
Posted: Sat Jan 12, 2013 12:18 amHi all,
I am a newbie here.. i have a problem about the callerid it won't appear it is a Singapore phone number when i make a call the number appear is Anonymous number.
this is my version Vicibox Redux 3.1.15 Asterisk version 1.4.21.2
I am a newbie here.. i have a problem about the callerid it won't appear it is a Singapore phone number when i make a call the number appear is Anonymous number.
this is my version Vicibox Redux 3.1.15 Asterisk version 1.4.21.2
Re: Callerid
Posted: Sun Jan 13, 2013 6:05 amcheck with your VOIP.
Re: Callerid
Posted: Wed Jan 30, 2013 2:40 pmArkhi wrote:Hi all,
I am a newbie here.. i have a problem about the callerid it won't appear it is a Singapore phone number when i make a call the number appear is Anonymous number.
this is my version Vicibox Redux 3.1.15 Asterisk version 1.4.21.2
Welcome to the Party!
Here are some helpful hints (to get your help faster ... for instance ...):
when you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.
this IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)
You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.
If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.
Similar to This:
Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600
I seriously suggest you read the Manager's Manual and follow the exercises in it from page one to the end. Don't skip anything.
Somewhere in there, you will find that the callerid is set on each campaign. You will also find that the Three Lines in the "Sample SIP configuration" are all required. Without all three, vicidial functions will fail (like setting the CallerID for instance ...).
Happy Hunting!