vicidial.org

Hi, new here,

Would like to ask some advice regarding Elastix PBX and Vicidial used both processed calls.

1. Elastix System is already established and used as PBX system with extensions working and dialing out manually.
2. Now Vicidial is added on same network to give predictive options and manager leads on the process.
3. the planned is to used Elastix existing extension to login on the Vicidial system to do predictive dialing and login to vicidial adn manage leads.(Is this possible..? ill used Elastix as registration Server for Vicidial)
- Would the Load balance notes of Vicidial applies to this process-Having the extension ( initially what i did is add on carrier trunk on vicidial the trunk of ElastixPBX)
- On PBX trunk i added Vicidial trunk also (This part im confuse which trunk should this be.? is this the trunk Server..?)
- Then how do i start using Elastix extension to login to vicidial..? Do i need to add phones on Vicidial..? or no need)

Hope any further idea on this. Thanks a lot

My advice is to use two separate physical machines. And if you must run the trunks from one through to the other make sure you have the trunks go through the Vicidial server into the Elastix server.

2 separa machines would be better since both have their set of AGI scripts that when put together in one server will cause several stability issues

yes you can ...

1. you need to create a trunk between vicidial and elastix either sip or IAX
(link : http://www.asteriskdocs.org/en/2nd_Edit ... erisk.html)

2. you need to create external extensions in vicidial ( the extension same extension used in elastix) with proper dialplan no.
hint: protocol = EXTERNAL while creating phones in vicidial

3. agent have to use these extension, once login there elastix extension will ring and get connected.

Thanks guys,

Yes im doing this on separate Server actually.

@striker thanks:

What would be the procedure for this..? how the calls flow..?

1. sample i have xtension 1000 on FreePBX - so ill make 1000 on vicidial also and put it on EXTERNAL.
2. What you mean proper Dialplan..? are the dialplan not the default we need to do some custom dial..?

Hope you can enlighten up more the procedures.Thanks a lot for the help.

-

have did the sip trunk between vicidial and elastix servers as per the below link

http://www.asteriskdocs.org/en/2nd_Edit ... erisk.html

HI guys,

I have already registered both Elastix and Vicidial to each other now

Vicidial:

Code: Select all

Host                  dnsmgr  Username    Perceived             Refresh  State
192.168.56.3:4569     N       TESTast     192.168.56.2:4569          60  Registered
127.0.0.1:41569       N       ASTblind    127.0.0.1:58253            60  Registered
127.0.0.1:40569       N       ASTloop     127.0.0.1:40735            60  Registered


Elastix:

Code: Select all

Host                  dnsmgr  Username    Perceived             Refresh  State
192.168.56.2:4569     N       autodialle  192.168.56.3:4569          60  Registered


1. Add SIP extensions 1000-1010 - Added on Elastix
2. Add Phone extension 1000-1010 - with protocol:EXTERNAL - on vicidial
3. Registered SIP phones on Elastix extension 1000 then inptu credential login details on vicidial agent page
4. Upon submit no ringback from softphones and get this error log on vicidial

Code: Select all

[Jun 11 15:39:10] NOTICE[9632]: chan_local.c:969 local_call: No such extension/context 1001@default while calling Local channel
[Jun 11 15:39:10] NOTICE[9632]: channel.c:5486 __ast_request_and_dial: Unable to call channel Local/1001@default
[Jun 11 15:39:11]   == Manager 'sendcron' logged off from 127.0.0.1


It seems the local phones of Elastix cant reach vicidial and vice versa with Vicidial to Elastix...any help...? Thanks

Any dial plan a need to add on Vicidial trunk and also on Elastix..? please share some idea.

u need ot have a dialplan like this


exten => _100X,1,Dial(SIP/TESTast/${EXTEN},,Ttor)
exten => _100X,2,Hangup


in elastix the trunk should have context from-internal

@striker

How do i apply that? into SIP since my peers are IAX2 from elastix and vicidial.

Vicidial

Code: Select all

register => TESTast:test@192.168.56.3:4569

Code: Select all

[autodialler]
type=friend
username=autodialler
fromuser=autodialler
secret=dialler123
host=dynamic
context=trunkinbound
disallow=all
allow=ulaw
allow=alaw
qualify=yes

Code: Select all

TRUNKElastix=IAX2/autodialler

Code: Select all

exten => _100X,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _100X,n,Dial(${TRUNKElastix}/${EXTEN},50,o)
exten => _100X,n,Hangup

Latest logs on display ---->

Code: Select all

[Jun 11 20:27:08]   == Using SIP RTP CoS mark 5
[Jun 11 20:27:08]     -- Executing [1000@default:1] AGI("SIP/100-00000000", "agi://127.0.0.1:4577/call_log") in new stack
[Jun 11 20:27:08]     -- <SIP/100-00000000>AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Jun 11 20:27:08]     -- Executing [1000@default:2] Dial("SIP/100-00000000", "IAX2/autodialler/1000,50,o") in new stack
[Jun 11 20:27:08]     -- Called IAX2/autodialler/1000
[Jun 11 20:27:08]     -- Hungup 'IAX2/autodialler-2006'
[Jun 11 20:27:08]   == Everyone is busy/congested at this time (1:0/0/1)
[Jun 11 20:27:08]     -- Executing [1000@default:3] Hangup("SIP/100-00000000", "") in new stack
[Jun 11 20:27:08]   == Spawn extension (default, 1000, 3) exited non-zero on 'SIP/100-00000000'
[Jun 11 20:27:08]     -- Executing [h@default:1] AGI("SIP/100-00000000", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----50-----CHANUNAVAIL----------") in new stack
[Jun 11 20:27:08]     -- <SIP/100-00000000>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----50-----CHANUNAVAIL---------- completed, returning 0


Any idea and thought somehow on this.Thanks

Should be 10XX not 100X (1010 is not 100X, LOL).

If you have host=dynamic, then Vicidial has no idea what its IP is until it registers with you. This means the elastix server would need to register with Vicidial for Vicidial to know its IP address. I get the impression that the IP of the elastix server is 192.168.56.3 from your registration entry. So change the host= entry to host=192.168.56.3.

Also, since you are using IP authentication, you should lose the username/fromuser/secret entries entirely.

I've found that your "first trunking between servers" is usually simpler if you just make a phone in one of the servers link to a trunk in the other. In this case, you could have a carrier in Vicidial use the credentials of an extension in Elastix and you could probably make it work much simpler. Get more complex later. (Then you would use a trunk in Elastix and a Carrier in Vicidial and you can choose to IP authenticate or user/pass authenticate or even both if you want to be hyper-secure).

Do remember that from the perspective of a "Real" carrier, this is actually how your Vicidial server is viewed already. Only now YOU are the carrier. And instead of dialing a 10 digit PSTN phone number, you are dialing a 4 digit number that happens to belong to a phone on the same server. But Vicidial doesn't know that (or care). It's just making a call.

Thanks william on this i didn't see this..

Code: Select all

Should be 10XX not 100X (1010 is not 100X, LOL).

Code: Select all

If you have host=dynamic, then Vicidial has no idea what its IP is until it registers with you. This means the elastix server would need to register with Vicidial for Vicidial to know its IP address. I get the impression that the IP of the elastix server is 192.168.56.3 from your registration entry. So change the host= entry to host=192.168.56.3.

very nice on this - both Server did see each other with IP authentucation my config:

Vicidial

Code: Select all

[autodialler]
type=friend
canreinvite=no
host=192.168.56.3
context=trunkinbound
dtmfmode=rfc2833
disallow=all
allow=ulaw
allow=alaw
qualify=yes

Elastix

Code: Select all

type=friend
canreinvite=no
host=192.168.56.2
dtmfmode=rfc2833c
context=from-internal
disallow=all
allow=ulaw&alaw
qualify=yes

Result:
Elastix

Code: Select all

Name/Username    Host                 Mask             Port          Status
TESTast          192.168.56.2    (S)  255.255.255.255  4569          OK (32 ms)
1 iax2 peers [1 online, 0 offline, 0 unmonitored]


Vicidial

Code: Select all

Name/Username    Host                 Mask             Port          Status
ASTblind         127.0.0.1       (D)  255.255.255.255  41923         OK (5 ms)
ASTloop          127.0.0.1       (D)  255.255.255.255  51757         OK (7 ms)
autodialler      192.168.56.3    (S)  255.255.255.255  4569          OK (2 ms)


What could be the next step on this - create a Dialplan?

Code: Select all

exten => _10XX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _10XX,n,Dial(${TRUNKElastix}/${EXTEN},50,o)
exten => _10XX,n,Hangup

And after..? Thanks for this william..

UPdates:

- Nice it did worked and able to established meetme conference with vicidial and dial the local extension of Elastix.
- im on session with vicidial and able dial out with the added Carrier settings on the Vicidial on the specified prefix.

Question,

what about if my Dialout will be the elastix..? how do i proceed on it..?
- I added the trunk on Elastix and also set it with the outbound Routes same dial prefix and pattern
Now when i login conference is established but when i dial out with its dial pattern i get error, im sorry that is not a valid extension..always.

should i need to add up some custom dialplan for this.? any suggestion.Goal is the Dialout will be on elastix even the the Meetme conference is established on Vicidial.