Dialing method for blended campaign

[macaruchi]

Hi!
I have a campaign with manual now this campain need to be blended and ratio. What must be the conf for dialing method for blended and predictive

TIA

[williamconley]

1) Welcome to the Party!

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method (7.X.X?) and vicidial version with build (VERSION: 2.X-XXXx ... BUILD: #####-####).

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "manual/from scratch" you must post your operating system with version (and the .iso version from which you installed your original operating system) plus a link to the installation instructions you used. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) To answer your question: Download the Vicidial Manager's Manual. Start at page one. Don't skip anything. It provides a step by step method to configure your campaign and everything that is required before you begin. If you don't skip anything, you'll have a functional campaign running in autodial before you're done. If you bump into a problem, tell us the page/line of the manual ... what your settings are ... and what your problem is (ie: what happened, and what you think should have happened based on your settings). We'll walk you through. But reprinting the manual here in your post is probably not useful, right?