Any and all non-support discussions
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
by syedfahim786 » Sun Sep 11, 2022 2:25 pm
AMD hangs up the calls the moment it understands it's an answering machine. Do we have any ways to "not immediately" hang up the calls?
The situation is: Our carriers are not liking short-duration calls which are due to Auto-Answering-Machine detection. Either we can leave a voicemail or stay on the line for at least sometimes and then we can hang up the call. At the same time we are unable to put agents to sit on the answering machine.
It is doable to leave a pre-recorded voice message with the AMD to increase the call duration time? Any advice will be appreciated.
Vicidial 9 |Centos 7 |Asterisk 13.29.2 |Version:2.14b0.5 |SVN Version:3614 |DB Schema Version: 1663
Hardware: Hardware CPU | Intel Xeon E3-1245v5 - 4c/8t - 3.5 GHz/3.9 GHz | RAM 32 GB ECC 2133 MHz |Data disks 2×480 GB SSD SATA |Expansion cards Soft RAID
-
syedfahim786
-
- Posts: 17
- Joined: Tue May 18, 2021 3:39 am
by GenXOutsourcing » Mon Sep 12, 2022 7:23 am
Yes, you can automatically leave VMs when answering machines are detected. Its in the Vicidial Manual
And if your carrier is complaining about short duration/dialer calls... I would suggest to find a new carrier.
Built too many to count, Centos7 Scratch install, Opensuse Scratch install, Centos8 Scratch install, etc.
Dual 8 core/32gb RAM/500gb SSDs
SVN Version:3440
VERSION: 2.14-812a
genxoutsourcing.com
-
GenXOutsourcing
-
- Posts: 120
- Joined: Sun Sep 22, 2019 12:53 am
by Acidshock » Mon Sep 26, 2022 4:41 pm
Hate to say it but short call durations are going to be a bigger problem in the future. Lots of noise coming down the pipeline right now from the powers that be due to compliance and anti robocall initiatives. You may not be having a problem now but its going to eventually be one.
VERSION: 2.14-698a | BUILD: 190207-2301 | Asterisk:13.24.1-vici | Vicibox 8.1.2
-
Acidshock
-
- Posts: 430
- Joined: Wed Mar 03, 2010 3:19 pm
by mflorell » Thu Oct 17, 2024 3:23 pm
A little over a month ago(September 6, 2024 [svn revision 3873]) we added a small feature to VD_amd.agi that would ensure it runs for a minimum number of seconds before exiting when it is used, this feature is triggered by a dialplan variable being set right before the "Dial(..." line, see the comments from the script below for details:
# To use the new "AMDMINLEN" feature, put a similar line like following line in your outbound dialing dialplan IMMEDIATELY BEFORE the "Dial(" line:
# exten => _91NXXNXXXXXX,n,Set(__AMDMINLEN=7)
# NOTE: the above variable setting will ensure that this script has run for a minimum of 7 seconds before ending and hanging up
We've been running this for over a month now on some VICIhost client systems and it has significantly helped to lower the short-duration-call percentage for those clients we've activated it for.
-
mflorell
- Site Admin
-
- Posts: 18383
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
-
by carpenox » Sat Oct 19, 2024 9:47 pm
nice, look forward to trying this out
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
-
carpenox
-
- Posts: 2418
- Joined: Wed Apr 08, 2020 2:02 am
- Location: St Petersburg, FL
-
by carpenox » Mon Oct 28, 2024 2:20 pm
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
-
carpenox
-
- Posts: 2418
- Joined: Wed Apr 08, 2020 2:02 am
- Location: St Petersburg, FL
-
Return to General Discussion
Who is online
Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 33 guests