vicidial.org

VICIDIAL astGUIclient discussion forum
http://forum.eflo.net/VICIDIALforum/

Predictive Not working while Manual works just fine

http://forum.eflo.net/VICIDIALforum/viewtopic.php?f=2&t=41506

Page 1 of 1

Predictive Not working while Manual works just fine

PostPosted: Wed Oct 05, 2022 6:07 am
by marveelou
vicidial version, installed from vicibox 8.1

Version: 2.14b0.5
SVN Version: 3644
DB Schema Version: 1667

logs
[Oct 5 07:03:36] == Spawn extension (default, 53214033023605, 3) exited non-zero on 'Local/8600052@default-00000025;1'
[Oct 5 07:03:36] -- Executing [h@default:1] AGI("Local/8600052@default-00000025;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0-----CANCEL---------------SIP 183 Session Progress)") in new stack
[Oct 5 07:03:36] -- <Local/8600052@default-00000025;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... -------SIP 183 Session Progress) completed, returning 0
[Oct 5 07:03:36] == Spawn extension (default, 8600052, 1) exited non-zero on 'Local/8600052@default-00000025;2'
[Oct 5 07:03:36] WARNING[30457][C-00000039]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Oct 5 07:03:36] -- Executing [h@default:1] AGI("Local/8600052@default-00000025;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------------)") in new stack
[Oct 5 07:03:36] -- <Local/8600052@default-00000025;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
[Oct 5 07:03:36] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 5 07:03:36] NOTICE[30542]: manager.c:4366 action_hangup: Request to hangup non-existent channel: Local/8600052@default-00000025;2
[Oct 5 07:03:36] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 5 07:03:36] -- Manager 'sendcron' from 127.0.0.1, hanging up channel: Local/58600052@default-00000026;2
[Oct 5 07:03:36] == Spawn extension (default, 58600052, 1) exited non-zero on 'Local/58600052@default-00000026;2'
[Oct 5 07:03:36] WARNING[30464][C-0000003b]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Oct 5 07:03:36] -- Executing [h@default:1] AGI("Local/58600052@default-00000026;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------------)") in new stack
[Oct 5 07:03:36] -- <Local/58600052@default-00000026;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
[Oct 5 07:03:36] == Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600052@default-00000026;1'
[Oct 5 07:03:36] WARNING[30463][C-0000003c]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Oct 5 07:03:36] -- Executing [h@default:1] AGI("Local/58600052@default-00000026;1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------------)") in new stack
[Oct 5 07:03:36] -- <Local/58600052@default-00000026;1>AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ----------) completed, returning 0
[Oct 5 07:03:37] == Manager 'sendcron' logged off from 127.0.0.1
[Oct 5 07:03:37] == Manager 'sendcron' logged off from 127.0.0.1

Re: Predictive Not working while Manual works just fine

PostPosted: Wed Oct 05, 2022 6:43 am
by marveelou
this issue has been resolved. This issue is with the dial plan entry just remove
the called id name option and calls started to come in.

old dial plan
exten => _533.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _533.,n,Set(CALLERID(all)="Service Dept" <16043323392>)
exten => _533.,n,Dial(SIP/${EXTEN:3}@voip,,tTo)
exten => _533.,n,Hangup()

new dial plan - this one works
exten => _535.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _535.,n,Dial(SIP/${EXTEN:3}@voip,,tTo)
exten => _535.,n,Hangup()


Hope it helps...Thank you

Re: Predictive Not working while Manual works just fine

PostPosted: Wed Oct 05, 2022 6:54 am
by jamiemurray
VICIdial uses the caller ID name field to track the calls, if you change that, it usually breaks auto-dial.
If you require to set caller id name before sending to the carrier, you will need to do a loopback call to an unlogged call and change the caller id there instead, as far as I'm aware, Canada is about the only place that allows dynamic caller ID name so unless you calling there, there probably no need to do this.

Re: Predictive Not working while Manual works just fine

PostPosted: Sun Oct 16, 2022 9:54 am
by jamiemurray
Another note, if you want to set caller ID name for calls to canada, you could try this solution:

Note: Not all carriers support using P-Asserted-ID as the caller ID override and some require different formats. Test it first or check with the carrier.

In your carrier dialplan entry:

exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
same => n,GotoIf($["${CUT(SIPADDHEADER01, ,2-)}" = ""]?basicpaid)
same => n,SIPAddHeader(P-Asserted-Identity: "${CUT(SIPADDHEADER01, ,2-)}" <tel:${CALLERID(num)}>)
same => n,Goto(dial)
same => n(basicpaid),SIPAddHeader(P-Asserted-Identity: "${CALLERID(num)}" <tel:${CALLERID(num)}>)
same => n(dial),Dial(${CARRIER}/${EXTEN:1},${CAMPDTO},To)
same => n,Hangup()

In system settings:
OpenSIPs CID Name Support = 1

In Campaign Detail View:
Campaign CID Name = [Your CID Name as you want it displayed]
All times are UTC - 5 hours
Page 1 of 1
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/