Page 1 of 1

Client's PC!

PostPosted: Mon Jan 07, 2008 6:43 pm
by mxconn
Hello,

I want to know what motherboard should i buy for my clients PC's. i want to use Dual core processors for the client's PCs. I dont have good experience with Intel D945GCPE and D945GCNL Series boards with P4 HT 3.0 processors.

Please help find out some good specification for clients PC's in my call center.


Regards
Sajid

hello

PostPosted: Tue Jan 08, 2008 5:02 pm
by eliasferreyra
i recommend to you the intel mother board and interl cpu dual core
and at least 2gm ddr2 ram, and sata disk or scsi

mb

DP965LT

Processor Support for Intel® Core™2 Quad processor in an LGA775 socket with a 1066 MHz system bus
Support for an Intel® Core™2 Extreme processor in an LGA775 socket with a 1066 MHz system bus
Support for an Intel® Core™2 Duo Processor in an LGA775 socket with a 1066 or 800 MHz system bus
Support for an Intel® Pentium® D Processor in an LGA775 socket with an 800 MHz system bus
Support for an Intel® Pentium® 4 Processor in an LGA775 socket with an 800 or 533 MHz system bus
Support for an Intel® Celeron® D Processor in an LGA775 socket with a 533 MHz system bus
View all supported processors

Memory Four 240-pin DDR2 SDRAM Dual Inline Memory Module (DIMM) sockets
Support for DDR2 800, DDR2 667, or DDR2 533 MHz DIMMs
Support for up to 8 GB of system memory

Chipset Intel® P965 Express Chipset
Audio 6-channel (5.1) audio subsystem using the SigmaTel STAC9227* audio codec

PostPosted: Wed Jan 09, 2008 10:44 am
by mxconn
Is it for the clients Pc's or for the Server? I mean isnt 1 GB or 512 MB RAM is enough for the clients PCs?

Regards
Sajid