SipToSis

[kddacraker]

Hi all,

I came across this

http://www.mhspot.com/sts/siptosis_skyp ... howto.html

do any body know if skype can configure with vicidail if so how to do that ?

thanks in advance

[mflorell]

This just looks like a SIP -> Skype proxy, and it appears as if you would not be able to get too many concurrent calls out of a setup like this.

Since Asterisk just thinks it's SIP you would just set it up like a normal SIP trunk.

[rhonuatics]

Hi!

Newbee here.. Is is possible to use Siptosis with GoAutodial?

I managed to install skype & siptosis on my GoAutodial Test machine by following the instructions from mhspot

I did make it work as a standalone skype installation and Siptosis was registered successfully. If this would work, i'll try it on a multi-channel setup since only on call can be made at a time.

I added a skype trunk/carrier on the Admin->Carriers and set it as the ONLY active carrier.

Question: What context should i use on the Account Entry?

----- Messages on CLI when i try to call a lead on the agent interface

NOTICE[22229]:chan_local.c:508 local_call: No[May 6 23:31:47] == Parsing '/etc/asterisk/manager.conf': [May 6 23:31:47] Found
[May 6 23:31:47] == Manager 'sendcron' logged on from 127.0.0.1
[May 6 23:31:47] -- Executing [8600051@default:1] MeetMe("Local/8600051@default-4515,2", "8600051|F") in new stack
[May 6 23:31:47] > Channel Local/8600051@default-4515,1 was answered.
[May 6 23:31:47] -- Executing [712316523956@default:1] Dial("Local/8600051@default-4515,1", "SIP/skypeuser/12316523956") in new stack
[May 6 23:31:47] -- Called skypeuser/12316523956
[May 6 23:31:47] -- Got SIP response 482 "Loop Detected" back from 192.168.1.241
[May 6 23:31:47] -- Now forwarding Local/8600051@default-4515,1 to 'Local/12316523956@default' (thanks to SIP/skypeuser-00000002)
[May 6 23:31:47] NOTICE[22229]: chan_local.c:508 local_call: No such extension/context 12316523956@default while calling Local channel
[May 6 23:31:47] NOTICE[22229]: app_dial.c:571 wait_for_answer: Failed to dial on local channel for call forward to 'Local'
[May 6 23:31:47] == Everyone is busy/congested at this time (1:0/0/1)
[May 6 23:31:47] == Auto fallthrough, channel 'Local/8600051@default-4515,1' status is 'CHANUNAVAIL'


Thanks in Advance!

-rhon

[williamconley]

I did make it work as a standalone skype installation and Siptosis was registered successfully.

you'll have to explain what "make it work" means here. did you make a call?

what it boils down to is: Make this work with ASTERISK. Then come ask about GoAutoDial. In essence you just walked into Richard Petty's shop and asked if they do oil changes. (Answer: Yes. Will they change the oil in your BMW: No.)

AFTER you have this working as a functional asterisk trunk, we can certainly help you make it work with Vicidial. (GoAutoDial, by the way, is the installer ... it installs Asterisk and Vicidial just like Vicibox does, then Asterisk makes the calls and Vicidial is the Control software and reason for being here).

[rhonuatics]

what i mean in "make it work" is i made a call using skype installed on the goautodial(vicidial/asterisk) machine to test if i installed it correctly as instructed at mhspot.

unfortunately, i can't make it work on vicidial to use the skype trunk which i created on the admin-> carriers page.

i've checked the asterisk CLI:

Host Username Refresh State Reg.Time
192.168.1.241:5060 skypeuser 105 Registered Sat, 07 May 2011 01:33:21

@striker:
can you please post the procedures? i would like to try it..

Thanks!

[striker]

heres the link i followed
i forget the initial methods , once i remind i will post

http://nerdvittles.com/index.php?p=587

[rhonuatics]

I have a separate test machine with AsteriskNow/FreePBX and siptosis/skype trunk.

This one is working as described at mhspot. i can make outside calls using x-lite and Skype trunk.

[williamconley]

If you DID make it work, post your sip.conf entry and your dial plan from that "working" version (perhaps the command line output from asterisk from the successful call) and we can help you construct your "converted for Vicidial" version.

And when it's all done, you can post a step by step for the next guys (and then there'll be more help for you later, cuz lots of people will use it even if it IS only one channel).

[rhonuatics]

i tried both, from mhspot and nerdvittles.

both methods worked on my AsteriskNow/FreePBX test machine.

what i'm trying to do is to make it also work with Vicidial, which i am seeking help right now.

Thanks!

[rhonuatics]

The sip.conf & extensions.conf files here are auto-generated by FreeBPX. I made most of the configurations using the FreePBX GUI.

[rhonuatics]

here is the CLI output from my Asterisk/FreePBX machine w/ siptosis:

Connected to Asterisk 1.4.35 currently running on sipserver (pid = 2861)
Verbosity is at least 3
-- Registered SIP '1001' at 192.168.1.251 port 40554
-- Executing [76086611376@from-internal:1] Macro("SIP/1001-00000000", "user-callerid|SKIPTTL|") in new stack
-- Executing [s@macro-user-callerid:1] Set("SIP/1001-00000000", "AMPUSER=1001") in new stack
-- Executing [s@macro-user-callerid:2] GotoIf("SIP/1001-00000000", "0?report") in new stack
-- Executing [s@macro-user-callerid:3] ExecIf("SIP/1001-00000000", "1|Set|REALCALLERIDNUM=1001") in new stack
-- Executing [s@macro-user-callerid:4] Set("SIP/1001-00000000", "AMPUSER=1001") in new stack
-- Executing [s@macro-user-callerid:5] Set("SIP/1001-00000000", "AMPUSERCIDNAME=Ronnie") in new stack
-- Executing [s@macro-user-callerid:6] GotoIf("SIP/1001-00000000", "0?report") in new stack
-- Executing [s@macro-user-callerid:7] Set("SIP/1001-00000000", "AMPUSERCID=1001") in new stack
-- Executing [s@macro-user-callerid:8] Set("SIP/1001-00000000", "CALLERID(all)="Ronnie" <1001>") in new stack
-- Executing [s@macro-user-callerid:9] GotoIf("SIP/1001-00000000", "1?continue") in new stack
-- Goto (macro-user-callerid,s,18)
-- Executing [s@macro-user-callerid:18] Set("SIP/1001-00000000", "CALLERID(number)=1001") in new stack
-- Executing [s@macro-user-callerid:19] Set("SIP/1001-00000000", "CALLERID(name)=Ronnie") in new stack
-- Executing [s@macro-user-callerid:20] NoOp("SIP/1001-00000000", "Using CallerID "Ronnie" <1001>") in new stack
-- Executing [76086611376@from-internal:2] Set("SIP/1001-00000000", "_NODEST=") in new stack
-- Executing [76086611376@from-internal:3] Macro("SIP/1001-00000000", "record-enable|1001|OUT|") in new stack
-- Executing [s@macro-record-enable:1] GotoIf("SIP/1001-00000000", "1?check") in new stack
-- Goto (macro-record-enable,s,4)
-- Executing [s@macro-record-enable:4] ExecIf("SIP/1001-00000000", "0|MacroExit|") in new stack
-- Executing [s@macro-record-enable:5] GotoIf("SIP/1001-00000000", "0?Group:OUT") in new stack
-- Goto (macro-record-enable,s,15)
-- Executing [s@macro-record-enable:15] GotoIf("SIP/1001-00000000", "0?IN") in new stack
-- Executing [s@macro-record-enable:16] ExecIf("SIP/1001-00000000", "1|MacroExit|") in new stack
-- Executing [76086611376@from-internal:4] Macro("SIP/1001-00000000", "dialout-trunk|2|6086611376||") in new stack
-- Executing [s@macro-dialout-trunk:1] Set("SIP/1001-00000000", "DIAL_TRUNK=2") in new stack
-- Executing [s@macro-dialout-trunk:2] GosubIf("SIP/1001-00000000", "0?sub-pincheck|s|1") in new stack
-- Executing [s@macro-dialout-trunk:3] GotoIf("SIP/1001-00000000", "0?disabletrunk|1") in new stack
-- Executing [s@macro-dialout-trunk:4] Set("SIP/1001-00000000", "DIAL_NUMBER=6086611376") in new stack
-- Executing [s@macro-dialout-trunk:5] Set("SIP/1001-00000000", "DIAL_TRUNK_OPTIONS=tr") in new stack
-- Executing [s@macro-dialout-trunk:6] Set("SIP/1001-00000000", "OUTBOUND_GROUP=OUT_2") in new stack
-- Executing [s@macro-dialout-trunk:7] GotoIf("SIP/1001-00000000", "1?nomax") in new stack
-- Goto (macro-dialout-trunk,s,9)
-- Executing [s@macro-dialout-trunk:9] GotoIf("SIP/1001-00000000", "0?skipoutcid") in new stack
-- Executing [s@macro-dialout-trunk:10] Set("SIP/1001-00000000", "DIAL_TRUNK_OPTIONS=") in new stack
-- Executing [s@macro-dialout-trunk:11] Macro("SIP/1001-00000000", "outbound-callerid|2") in new stack
-- Executing [s@macro-outbound-callerid:1] ExecIf("SIP/1001-00000000", "0|SetCallerPres|") in new stack
-- Executing [s@macro-outbound-callerid:2] ExecIf("SIP/1001-00000000", "0|Set|REALCALLERIDNUM=1001") in new stack
-- Executing [s@macro-outbound-callerid:3] GotoIf("SIP/1001-00000000", "1?normcid") in new stack
-- Goto (macro-outbound-callerid,s,6)
-- Executing [s@macro-outbound-callerid:6] Set("SIP/1001-00000000", "USEROUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:7] Set("SIP/1001-00000000", "EMERGENCYCID=") in new stack
-- Executing [s@macro-outbound-callerid:8] Set("SIP/1001-00000000", "TRUNKOUTCID=") in new stack
-- Executing [s@macro-outbound-callerid:9] GotoIf("SIP/1001-00000000", "1?trunkcid") in new stack
-- Goto (macro-outbound-callerid,s,12)
-- Executing [s@macro-outbound-callerid:12] ExecIf("SIP/1001-00000000", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:13] ExecIf("SIP/1001-00000000", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:14] ExecIf("SIP/1001-00000000", "0|Set|CALLERID(all)=") in new stack
-- Executing [s@macro-outbound-callerid:15] ExecIf("SIP/1001-00000000", "0|SetCallerPres|prohib_passed_screen") in new stack
-- Executing [s@macro-dialout-trunk:12] ExecIf("SIP/1001-00000000", "1|AGI|fixlocalprefix") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/fixlocalprefix
== fixlocalprefix: Dialpattern . matched. 6086611376 -> 6086611376
-- AGI Script fixlocalprefix completed, returning 0
-- Executing [s@macro-dialout-trunk:13] Set("SIP/1001-00000000", "OUTNUM=6086611376") in new stack
-- Executing [s@macro-dialout-trunk:14] Set("SIP/1001-00000000", "custom=SIP/skypeuser") in new stack
-- Executing [s@macro-dialout-trunk:15] ExecIf("SIP/1001-00000000", "0|Set|DIAL_TRUNK_OPTIONS=M(setmusic^)") in new stack
-- Executing [s@macro-dialout-trunk:16] Macro("SIP/1001-00000000", "dialout-trunk-predial-hook|") in new stack
-- Executing [s@macro-dialout-trunk-predial-hook:1] MacroExit("SIP/1001-00000000", "") in new stack
-- Executing [s@macro-dialout-trunk:17] GotoIf("SIP/1001-00000000", "0?bypass|1") in new stack
-- Executing [s@macro-dialout-trunk:18] GotoIf("SIP/1001-00000000", "0?customtrunk") in new stack
-- Executing [s@macro-dialout-trunk:19] Dial("SIP/1001-00000000", "SIP/skypeuser/6086611376|300|") in new stack
-- Called skypeuser/6086611376
-- SIP/skypeuser-00000001 answered SIP/1001-00000000
-- Packet2Packet bridging SIP/1001-00000000 and SIP/skypeuser-00000001
-- Executing [h@macro-dialout-trunk:1] Macro("SIP/1001-00000000", "hangupcall|") in new stack
-- Executing [s@macro-hangupcall:1] GotoIf("SIP/1001-00000000", "1?skiprg") in new stack
-- Goto (macro-hangupcall,s,4)
-- Executing [s@macro-hangupcall:4] GotoIf("SIP/1001-00000000", "1?skipblkvm") in new stack
-- Goto (macro-hangupcall,s,7)
-- Executing [s@macro-hangupcall:7] GotoIf("SIP/1001-00000000", "1?theend") in new stack
-- Goto (macro-hangupcall,s,9)
-- Executing [s@macro-hangupcall:9] Hangup("SIP/1001-00000000", "") in new stack
== Spawn extension (macro-hangupcall, s, 9) exited non-zero on 'SIP/1001-00000000' in macro 'hangupcall'
== Spawn h extension (macro-dialout-trunk, h, 1) exited non-zero on 'SIP/1001-00000000'
== Spawn extension (macro-dialout-trunk, s, 19) exited non-zero on 'SIP/1001-00000000' in macro 'dialout-trunk'
== Spawn extension (from-internal, 76086611376, 4) exited non-zero on 'SIP/1001-00000000'

[williamconley]

And the engine in my car was built by a machine. But that doesn't mean i can drive without it. And if you want us to be able to convert THAT setup to the Vicidial setup, I'm not sure how we can do it without THAT setup.

Find it in the sip.conf and/or list all the entries you made in the FreePBX setup (from which FreePBX generated the sip.conf).