Viciphone 2.0

Discussions about development of VICIDIAL and astGUIclient

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Viciphone 2.0

Postby mcargile » Thu Jan 10, 2019 12:10 pm

I have Viciphone 2.0 working in Chrome and Firefox (at least on the 3 PCs I have tested so far). Would love some community feedback. If you are interested in testing it please do the following:

Change your WebRTC Template in Vicidial to this:

type=friend
host=dynamic
encryption=yes
icesupport=yes
directmedia=no
transport=wss
dtlsenable=yes
dtlsverify=no
dtlscertfile=/PATH/TO/YOUR/SSL/CERT
dtlsprivatekey=/PATH/TO/YOU/SSL/KEY
dtlssetup=actpass
rtcp_mux=yes

Then in System Setting change the Webphone URL to:

https://dev.viciphone.com/v2/viciphone.php

Everything all other configurations should be the same as version one. As I have said I have only tested this on 3 PCs so I recommend that you try this on a test dialer and not on a production system.
Michael Cargile | Director of Engineering | ViciDialGroup | http://www.vicidial.com

The official source for VICIDIAL services and support. 1-888-894-VICI (8424)
mcargile
Site Admin
 
Posts: 617
Joined: Tue Jan 16, 2007 9:38 am

Re: Viciphone 2.0

Postby dspaan » Wed Feb 13, 2019 3:54 pm

What are the changes/improvements compared to v1?
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby mcargile » Wed Feb 13, 2019 4:56 pm

It uses the new SIP.js library which is very different. It also has the potential to support MS Edge.
Michael Cargile | Director of Engineering | ViciDialGroup | http://www.vicidial.com

The official source for VICIDIAL services and support. 1-888-894-VICI (8424)
mcargile
Site Admin
 
Posts: 617
Joined: Tue Jan 16, 2007 9:38 am

Re: Viciphone 2.0

Postby ccabrera » Thu Feb 14, 2019 9:34 am

Michael,

Could you please publish this new code under a new branch in Github? I'll love to check out the new code and see whats new.
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby williamconley » Thu Feb 14, 2019 1:52 pm

ccabrera wrote:Michael,

Could you please publish this new code under a new branch in Github? I'll love to check out the new code and see whats new.

He'll be doing that AFTER he's finished with this round of testing. That's precisely the point of this post. He doesn't want to deal with 200 guys posting the same flaws to the code he's already working on. It's annoying to deal with that sort of thing, and he wants to see the activity in HIS server first so he can see what needs to be fixed before release.

Respect the coders methods, his work is excellent. 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby ccabrera » Thu Feb 14, 2019 3:14 pm

William, I believe that is the reason for which GitHub was created: Share code so that others may review, suggest, even improve.

He doesn't need to work on all the flaws by himself. We could help too, but for that we need to be able to join while the product is being built, not after.

As for the flaws he's already working on, that's completely understandable. But then again: GitHub has an issue tracker which would allow anyone to have a closer and more detailed follow up of whatever he's coding.

So what I'm saying is: there's some of us who want to contribute in developing, not just testing, and for that, we need to see code while it's being written.

Let us help.
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby williamconley » Thu Feb 14, 2019 3:23 pm

Yes, but not during initial build-out. During initial buildout, proof of concept and prototype stages, it's common to keep it in-house and not something you argue about with a technician who will be publishing the final prototype when it's ready.

He likes to get to "I think it works" and request bug checking after it's fully operational. I'll never argue with that approach on a free project (or bug the guy who has the code prematurely: If he wanted to publish his GIT already he would have).

lol: The rough equivalent of hearing "are we there yet?" from the back seat. IMHO 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby dspaan » Fri Feb 15, 2019 3:22 pm

I tested in chrome and it worked fine. Also tested in Edge but didn't get any audio and after 1 min the message there was no connection with my phone. Edge did ask me if my microphone could be used. Anything specific you wanted me to test?
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby dspaan » Mon Feb 18, 2019 2:39 pm

Also, can you add different ringtones for the webphone?
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby mcargile » Mon Apr 08, 2019 4:29 pm

I will be releasing the code on github once I am positive everything is working correctly. With regards to Edge, I am not bothering with finalizing that till they get their core switched over to Chromium. At which point I am 99% sure it will just work. As for the ringtones, I am happy to switch them, but we need an audio file that is is released under a compatible license which was hard to find in the first place.
Michael Cargile | Director of Engineering | ViciDialGroup | http://www.vicidial.com

The official source for VICIDIAL services and support. 1-888-894-VICI (8424)
mcargile
Site Admin
 
Posts: 617
Joined: Tue Jan 16, 2007 9:38 am

Re: Viciphone 2.0

Postby williamconley » Mon Apr 08, 2019 6:33 pm

mcargile wrote:I will be releasing the code on github once I am positive everything is working correctly. With regards to Edge, I am not bothering with finalizing that till they get their core switched over to Chromium. At which point I am 99% sure it will just work. As for the ringtones, I am happy to switch them, but we need an audio file that is is released under a compatible license which was hard to find in the first place.

just a place for the ringtone would be fine, even if it's always got the same filename in it. the ability to set the ringtone to a file in the audio store would be perfect.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby mcargile » Tue Apr 09, 2019 8:37 am

Honestly do not see this being added any time soon unless someone paid for it. This is mainly because it would require a ton of work in the agent interface of Vicidial to pass the option to Viciphone and Matt is swamped with paid development.

In other news the Canary build of Edge based off Chromium was just released and it works flawlessly with Viciphone.
Michael Cargile | Director of Engineering | ViciDialGroup | http://www.vicidial.com

The official source for VICIDIAL services and support. 1-888-894-VICI (8424)
mcargile
Site Admin
 
Posts: 617
Joined: Tue Jan 16, 2007 9:38 am

Re: Viciphone 2.0

Postby williamconley » Tue Apr 09, 2019 10:01 am

mcargile wrote:Honestly do not see this being added any time soon unless someone paid for it. This is mainly because it would require a ton of work in the agent interface of Vicidial to pass the option to Viciphone and Matt is swamped with paid development.

In other news the Canary build of Edge based off Chromium was just released and it works flawlessly with Viciphone.

ah, well. putting a note of where that file could be modified somewhere in the code for the lay-people wouldn't be bad either, if it's not too troublesome. Or here. Here is good, too.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby dspaan » Tue Apr 09, 2019 10:42 am

williamconley wrote:
mcargile wrote:Honestly do not see this being added any time soon unless someone paid for it. This is mainly because it would require a ton of work in the agent interface of Vicidial to pass the option to Viciphone and Matt is swamped with paid development.

In other news the Canary build of Edge based off Chromium was just released and it works flawlessly with Viciphone.

ah, well. putting a note of where that file could be modified somewhere in the code for the lay-people wouldn't be bad either, if it's not too troublesome. Or here. Here is good, too.


Good idea.
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby mcargile » Tue Apr 09, 2019 11:00 am

The files is called ringing.mp3 and is in the sounds directory.

This is the line in vici_phone.js where that is set:

Code: Select all
// setup the ringing audio file
ringAudio = new Audio('sounds/ringing.mp3');


I am open to suggestions on how to make this more "lay-people" friendly than it already is.
Michael Cargile | Director of Engineering | ViciDialGroup | http://www.vicidial.com

The official source for VICIDIAL services and support. 1-888-894-VICI (8424)
mcargile
Site Admin
 
Posts: 617
Joined: Tue Jan 16, 2007 9:38 am

Re: Viciphone 2.0

Postby dspaan » Tue Apr 09, 2019 12:57 pm

You're right, that's already very simple.
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby williamconley » Tue Apr 09, 2019 1:12 pm

perfect. if someone wants to pull that from a settings container or something it'll be easy enough to code for their call center. in the meantime, just editing the js file will suffice for those who care (and they'll just have to remember to update it whenever they upgrade).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby dspaan » Fri May 03, 2019 2:38 am

Michael, can you please take a look at this topic: viewtopic.php?f=4&t=39066&p=139116
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby dreedy » Mon Sep 23, 2019 2:55 pm

I am toying around with it on our test dialer here and it looks a lot more complete. I am seeing that ICE and STUN are making connections with less complaints on the code level in the console.
1- mysql/apache Server (ViciBox 11) Dell R640
1- Dialer (Vicibox 11) Dell R620
1- Web (Vicibox 11) Dell R620
1- Archive Server Drobo 810n

Asterisk 16.30.0-vici | VERSION: 2.14-924a | BUILD: 240716-1453 | svn 3856|dbschema 1717
dreedy
 
Posts: 182
Joined: Tue Nov 24, 2015 10:16 pm

Re: Viciphone 2.0

Postby dspaan » Mon Nov 11, 2019 6:07 pm

When will viciphone 2.0 be released in Github so it can be used in production?
I can still only download 1.0.0 from 2 years ago.
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby ccabrera » Tue Mar 24, 2020 7:30 pm

Guys,

Any way we could help development?
Any way we could access "alpha" source code?

We know it may need work, but currently there's no way to download the source, and we can only run it from https://dev.viciphone.com, but what if we want to host it in our own servers for offline installations?

Please let us know what we can do.

Regards,
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby alo » Wed Mar 25, 2020 12:35 am

you can run it from dev.viciphone.com? I would be interested in testing it?
alo
 
Posts: 197
Joined: Wed Jun 20, 2012 10:21 am

Re: Viciphone 2.0

Postby ccabrera » Thu Apr 16, 2020 4:23 am

Hello again,

Guys, after more than a year without hearing development news in this thread nor the Github website, I decided to create an updated version of the Viciphone, which was forked from Michael's original code.

You can browse the code at https://github.com/ccabrerar/ViciPhone or you can download the v2.0-beta1 release directly. Here's a minor list of changes:

- It's updated to use SIPJS 0.15.10, which is the most current up to date version
- SIPJS by default loads from jsdelivr CDN, but you can easily switch to offline by uncommenting one line of code
- Includes support for a translations file, in case agents don't speak english
- Spanish support added
- Changed the content of vici_phone.js to reuse code by implementing several functions which do repetitive work
- Can prefill the dial number box, and can also auto dial out once loaded

I tried it under Windows in Chrome, Firefox, Opera, Brave and Chromium Edge, but I'd love to get community feedback.

If you have any code suggestions, please open a pull request in Github.

Regards,
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby dspaan » Thu Apr 16, 2020 4:32 am

Thanks! Great work, i will test this and give you feedback.
Regards, Dennis

Vicibox 9.0.1
Version: 2.14b0.5
SVN Version: 3199
DB Schema Version: 1588
Build: 200310-1801
dspaan
 
Posts: 1377
Joined: Fri Aug 21, 2009 1:40 pm
Location: The Netherlands

Re: Viciphone 2.0

Postby Smartercom » Mon Jun 01, 2020 8:10 pm

ccabrera wrote:Hello again,

Guys, after more than a year without hearing development news in this thread nor the Github website, I decided to create an updated version of the Viciphone, which was forked from Michael's original code.

You can browse the code at https://github.com/ccabrerar/ViciPhone or you can download the v2.0-beta1 release directly. Here's a minor list of changes:

- It's updated to use SIPJS 0.15.10, which is the most current up to date version
- SIPJS by default loads from jsdelivr CDN, but you can easily switch to offline by uncommenting one line of code
- Includes support for a translations file, in case agents don't speak english
- Spanish support added
- Changed the content of vici_phone.js to reuse code by implementing several functions which do repetitive work
- Can prefill the dial number box, and can also auto dial out once loaded

I tried it under Windows in Chrome, Firefox, Opera, Brave and Chromium Edge, but I'd love to get community feedback.

If you have any code suggestions, please open a pull request in Github.

Regards,


Hi i want to test your viciphone 2.0 and i have used same template of viciphone.com with no luck, if i set webphone link to https://phone.viciphone.com/viciphone.php it works good and without problem but if i change it to my local directory ../agc/viciphone/viciphone.php where i have downloaded your project it's not working

this is my template :


type=friend
host=dynamic
encryption=yes
icesupport=yes
directmedia=no
transport=wss
dtlsenable=yes
dtlsverify=no
dtlscertfile=/PATH/TO/YOUR/SSL/CERT changed with my folder
dtlsprivatekey=/PATH/TO/YOU/SSL/KEY changed with my folder
dtlssetup=actpass
rtcp_mux=yes


here screenshot of errors in asterisk consolle
Image

Image

Image

the phone is registered but nothing is working (no call at login and no sound) and system says me none in this session...can you help me?
Smartercom
 
Posts: 24
Joined: Mon Apr 20, 2020 9:51 am

Re: Viciphone 2.0

Postby Smartercom » Mon Jun 01, 2020 8:38 pm

Resolved overwriting sip.js and vici_phone.js with original one from viciphone.com and now all it's working.
Smartercom
 
Posts: 24
Joined: Mon Apr 20, 2020 9:51 am

Re: Viciphone 2.0

Postby ccabrera » Mon Jun 01, 2020 9:15 pm

If you overwrite those files, you are pretty much going back to Viciphone 1.0.

Your screenshots reveal that the call is being established, otherwise Viciphone would read "Registered" instead of displaying the CallerID info. My best guess is there is a JS problem, which I cannot debug unless you share your browsers JS console. Perhaps the directory structure where you locally downloaded it is somehow unaccesible?

If you want to further test, you may try configuring Vicidial > Admin > System Settings and point to the following webphone URL: https://enlaza.mx/tools/viciphonev2/viciphone.php . This URL is for *testing* only, and thus I cannot guarantee it will be available 100% of the time, but is a quick way to try Viciphone 2.0 without having the need to download/install the code from Github.

Give it a spin, and let me know your results.
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby Smartercom » Wed Jun 03, 2020 11:37 am

this is error in consolle, can you help me?

Image
Smartercom
 
Posts: 24
Joined: Mon Apr 20, 2020 9:51 am

Re: Viciphone 2.0

Postby williamconley » Wed Jun 03, 2020 11:47 am

You loaded it as an image, so I can't copy/paste the relevent URLs. But the question is whether those URLs return 404 as suggested in the output. If they do, that's your problem. Do you have a valid cert installed at that location and is that file accessible?
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby ccabrera » Wed Jun 03, 2020 1:30 pm

@Smartercom

The only relevant line of code is the one which reads about the 'isSupported' variable. However, this line isn't from my code, because I don't use that variable at all.

Seems to me that you've mixed up files from v1.0, v2.0 and the development v2.0 from Michael.

I suggest the following:
1. Remove all files you have installed locally
2. Replace all of them with my code from Github
3. Clean your browser's cache

If that doesn't help, try the live version I set up at https://enlaza.mx/tools/viciphonev2/viciphone.php . As I just tried, calling that version from a live Vicidial works just fine right now, so I'm almost sure there is something getting mixed inside your installation.
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby Smartercom » Thu Jun 04, 2020 11:25 am

forget to clear cache..sorry

Image
Image
Image
Smartercom
 
Posts: 24
Joined: Mon Apr 20, 2020 9:51 am

Re: Viciphone 2.0

Postby ccabrera » Thu Jun 04, 2020 12:06 pm

SESSION_DESCRIPTION_HANDLER_ERROR: unable to acquire streams

Seems like the connection to Vicidial isn't being established by a proper secure stream. Perhaps your certificates aren't fully trusted by the browser or you haven't given the PC permission to use your headset?
Christian Cabrera
Enlaza Comunicaciones - Vicidial Partner
Mexico City
ccabrera
 
Posts: 153
Joined: Fri Jan 14, 2011 7:53 pm
Location: Mexico City

Re: Viciphone 2.0

Postby Smartercom » Thu Jun 04, 2020 3:58 pm

With same browser and PC all work fine If i modify SIP.js with original viciphone.
Smartercom
 
Posts: 24
Joined: Mon Apr 20, 2020 9:51 am

Re: Viciphone 2.0

Postby carpenox » Tue Jun 09, 2020 7:01 pm

This is what I'm getting using the github code ccaberra:

Code: Select all
[Jun  9 19:46:22]     -- Called 55558600053@default
[Jun  9 19:46:22]     -- Executing [55558600053@default:1] MeetMeAdmin("Local/55558600053@default-0000001d;2", "8600053,K") in new stack
[Jun  9 19:46:22] WARNING[30910][C-000008b1]: app_meetme.c:5261 admin_exec: Conference number '8600053' not found!
[Jun  9 19:46:22]     -- Executing [55558600053@default:2] Hangup("Local/55558600053@default-0000001d;2", "") in new stack
[Jun  9 19:46:22]   == Spawn extension (default, 55558600053, 2) exited non-zero on 'Local/55558600053@default-0000001d;2'
[Jun  9 19:46:22] WARNING[30910][C-000008b1]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Jun  9 19:46:22]     -- Executing [h@default:1] AGI("Local/55558600053@default-0000001d;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------)") in new stack
[Jun  9 19:46:22]     -- <Local/55558600053@default-0000001d;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------) completed, returning 0

[Jun  9 19:46:25]   == WebSocket connection from '12.1xx.24.xx0:50844' for protocol 'sip' accepted using version '13'
[Jun  9 19:46:25]     -- Registered SIP '2222' at 12.1xx.24.xx0:50844

[Jun  9 19:46:56] ERROR[16243]: utils.c:1499 ast_careful_fwrite: fflush() returned error: Bad file descriptor
[Jun  9 19:46:56] ERROR[16243]: tcptls.c:488 tcptls_stream_close: SSL_shutdown() failed: error:00000005:lib(0):func(0):DH lib, Underlying BIO error: Bad file descriptor
[Jun  9 19:46:56]   == WebSocket connection from '12.1xx.24.xxx:50729' forcefully closed due to fatal write error


It looks like its not gaining access to the conferences or its like dahdi isnt running but it is because the zoipers work
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2418
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL

Re: Viciphone 2.0

Postby williamconley » Thu Jun 11, 2020 11:36 am

meetme admin wants to "manage" a conference. But the conference doesn't exist. So there's a question as to why it's managing the conference instead of invoking the conference (or perhaps "before" when it should be "after"?).
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby carpenox » Thu Jun 11, 2020 11:57 am

Bill,

Any ideas of this part:

ERROR[16243]: utils.c:1499 ast_careful_fwrite: fflush() returned error: Bad file descriptor
[Jun 9 19:46:56] ERROR[16243]: tcptls.c:488 tcptls_stream_close: SSL_shutdown() failed: error:00000005:lib(0):func(0):DH lib, Underlying BIO error: Bad file descriptor
[Jun 9 19:46:56] == WebSocket connection from '12.1xx.24.xxx:50729' forcefully closed due to fatal write error
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2418
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL

Re: Viciphone 2.0

Postby williamconley » Thu Jun 11, 2020 12:34 pm

williamconley wrote:meetme admin wants to "manage" a conference. But the conference doesn't exist. So there's a question as to why it's managing the conference instead of invoking the conference (or perhaps "before" when it should be "after"?).

Code: Select all
MeetMeAdmin("Local/55558600051@default-00000011;2", "8600051,K")


https://www.voip-info.org/asterisk-cmd-meetmeadmin/

MeetMeAdmin(confno,command[,user])

‘K’ — Kick all users out of conference\n”

This is a "terminate all channels in this conference" attempt. IE: This is meant to shut it down, and Vicidial does not bother to check if it's there before issuing this command. So the problem occurs before this. There is a failure that causes termination, this is merely the "termination" happening.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby williamconley » Thu Jun 11, 2020 12:35 pm

carpenox wrote:Bill,

Any ideas of this part:

ERROR[16243]: utils.c:1499 ast_careful_fwrite: fflush() returned error: Bad file descriptor
[Jun 9 19:46:56] ERROR[16243]: tcptls.c:488 tcptls_stream_close: SSL_shutdown() failed: error:00000005:lib(0):func(0):DH lib, Underlying BIO error: Bad file descriptor
[Jun 9 19:46:56] == WebSocket connection from '12.1xx.24.xxx:50729' forcefully closed due to fatal write error

Seems likely that this is another "shutting down" problem due to an earlier error. Was the channel/meetme room ever actually "Up"? That's the area to attack.
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20252
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)

Re: Viciphone 2.0

Postby carpenox » Thu Jun 11, 2020 2:10 pm

no it wasnt however it does initiate it if the agents use zoiper, just not viciphone 2.0
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2418
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL

Re: Viciphone 2.0

Postby carpenox » Fri Jun 12, 2020 8:52 am

Here is the CLI during the webphone user connecting to the interface:

sorry for its length but this is all just during the connect part not anything extra, so something going on thats hinky

Code: Select all
[Jun 12 09:28:24] Reliably Transmitting (NAT) to xx1.171.xx.x:60747:
[Jun 12 09:28:24] CANCEL sip:8q8hlhsg@192.0.2.53;transport=wss SIP/2.0
[Jun 12 09:28:24] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK19440885;rport
[Jun 12 09:28:24] Max-Forwards: 70
[Jun 12 09:28:24] From: "ACagcW15919684842222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as6cbe7484
[Jun 12 09:28:24] To: <sip:8q8hlhsg@192.0.2.53;transport=wss>
[Jun 12 09:28:24] Call-ID: 1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060
[Jun 12 09:28:24] CSeq: 102 CANCEL
[Jun 12 09:28:24] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:24] Content-Length: 0
[Jun 12 09:28:24]
[Jun 12 09:28:24]
[Jun 12 09:28:24] ---
[Jun 12 09:28:24] Scheduling destruction of SIP dialog '1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:28:24]   == Manager 'sendcron' logged on from 127.0.0.1
[Jun 12 09:28:24]     -- Called 55558600051@default
[Jun 12 09:28:24]     -- Executing [55558600051@default:1] MeetMeAdmin("Local/55558600051@default-00000001;2", "8600051,K") in new stack
[Jun 12 09:28:24] WARNING[8664][C-00000001]: app_meetme.c:5261 admin_exec: Conference number '8600051' not found!
[Jun 12 09:28:24]     -- Executing [55558600051@default:2] Hangup("Local/55558600051@default-00000001;2", "") in new stack
[Jun 12 09:28:24]   == Spawn extension (default, 55558600051, 2) exited non-zero on 'Local/55558600051@default-00000001;2'
[Jun 12 09:28:24] WARNING[8664][C-00000001]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Jun 12 09:28:24]     -- Executing [h@default:1] AGI("Local/55558600051@default-00000001;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------)") in new stack
[Jun 12 09:28:24]     -- <Local/55558600051@default-00000001;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------) completed, returning 0
[Jun 12 09:28:24]
[Jun 12 09:28:24] <--- SIP read from WS:xx1.171.xx.x:60747 --->
[Jun 12 09:28:24] SIP/2.0 200 OK
[Jun 12 09:28:24] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK19440885;rport
[Jun 12 09:28:24] From: "ACagcW15919684842222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as6cbe7484
[Jun 12 09:28:24] To: <sip:8q8hlhsg@192.0.2.53;transport=wss>;tag=lbgp25b290
[Jun 12 09:28:24] CSeq: 102 CANCEL
[Jun 12 09:28:24] Call-ID: 1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060
[Jun 12 09:28:24] Supported: outbound
[Jun 12 09:28:24] User-Agent: VICIphone 2.0
[Jun 12 09:28:24] Content-Length: 0
[Jun 12 09:28:24]
[Jun 12 09:28:24] <------------->
[Jun 12 09:28:24] --- (9 headers 0 lines) ---
[Jun 12 09:28:24]
[Jun 12 09:28:24] <--- SIP read from WS:xx1.171.xx.x:60747 --->
[Jun 12 09:28:24] SIP/2.0 487 Request Terminated
[Jun 12 09:28:24] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK19440885;rport
[Jun 12 09:28:24] From: "ACagcW15919684842222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as6cbe7484
[Jun 12 09:28:24] To: <sip:8q8hlhsg@192.0.2.53;transport=wss>;tag=p9e784nmbn
[Jun 12 09:28:24] CSeq: 102 INVITE
[Jun 12 09:28:24] Call-ID: 1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060
[Jun 12 09:28:24] Supported: outbound
[Jun 12 09:28:24] User-Agent: VICIphone 2.0
[Jun 12 09:28:24] Content-Length: 0
[Jun 12 09:28:24]
[Jun 12 09:28:24] <------------->
[Jun 12 09:28:24] --- (9 headers 0 lines) ---
[Jun 12 09:28:24] Transmitting (NAT) to xx1.171.xx.x:60747:
[Jun 12 09:28:24] ACK sip:8q8hlhsg@192.0.2.53;transport=wss SIP/2.0
[Jun 12 09:28:24] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK19440885;rport
[Jun 12 09:28:24] Max-Forwards: 70
[Jun 12 09:28:24] From: "ACagcW15919684842222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as6cbe7484
[Jun 12 09:28:24] To: <sip:8q8hlhsg@192.0.2.53;transport=wss>;tag=p9e784nmbn
[Jun 12 09:28:24] Contact: <sip:202xxx8707@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:24] Call-ID: 1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060
[Jun 12 09:28:24] CSeq: 102 ACK
[Jun 12 09:28:24] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:24] Content-Length: 0
[Jun 12 09:28:24]
[Jun 12 09:28:24]
[Jun 12 09:28:24] ---
[Jun 12 09:28:24] Scheduling destruction of SIP dialog '1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:28:25]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:28:25]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:28:25]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:28:26]
[Jun 12 09:28:26] <--- SIP read from WS:xx1.171.xx.x:60747 --->
[Jun 12 09:28:26] REGISTER sip:xx1.171.xx.x SIP/2.0
[Jun 12 09:28:26] Via: SIP/2.0/TCP 192.0.2.53;branch=z9hG4bK6085544
[Jun 12 09:28:26] To: "2222" <sip:2222@xx1.171.xx.x>
[Jun 12 09:28:26] From: "2222" <sip:2222@xx1.171.xx.x>;tag=aghq6bk6dn
[Jun 12 09:28:26] CSeq: 7461 REGISTER
[Jun 12 09:28:26] Call-ID: umejua6b0p2bs8li5plnol
[Jun 12 09:28:26] Max-Forwards: 70
[Jun 12 09:28:26] Authorization: Digest algorithm=MD5, username="2222", realm="cyburity.tk", nonce="2ee20980", uri="sip:xx1.171.xx.x", response="6e7dc3cac5c9ad6ec4092922f93f56a4"
[Jun 12 09:28:26] Contact: <sip:8q8hlhsg@192.0.2.53;transport=wss>;expires=0
[Jun 12 09:28:26] Supported: outbound, path, gruu
[Jun 12 09:28:26] User-Agent: VICIphone 2.0
[Jun 12 09:28:26] Content-Length: 0
[Jun 12 09:28:26]
[Jun 12 09:28:26] <------------->
[Jun 12 09:28:26] --- (12 headers 0 lines) ---
[Jun 12 09:28:26] Sending to xx1.171.xx.x:60747 (NAT)
[Jun 12 09:28:26] Sending to xx1.171.xx.x:60747 (NAT)
[Jun 12 09:28:26]
[Jun 12 09:28:26] <--- Transmitting (NAT) to xx1.171.xx.x:60747 --->
[Jun 12 09:28:26] SIP/2.0 401 Unauthorized
[Jun 12 09:28:26] Via: SIP/2.0/TCP 192.0.2.53;branch=z9hG4bK6085544;received=xx1.171.xx.x;rport=60747
[Jun 12 09:28:26] From: "2222" <sip:2222@xx1.171.xx.x>;tag=aghq6bk6dn
[Jun 12 09:28:26] To: "2222" <sip:2222@xx1.171.xx.x>;tag=as0b89a4bd
[Jun 12 09:28:26] Call-ID: umejua6b0p2bs8li5plnol
[Jun 12 09:28:26] CSeq: 7461 REGISTER
[Jun 12 09:28:26] Server: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:26] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:26] Supported: replaces, timer
[Jun 12 09:28:26] WWW-Authenticate: Digest algorithm=MD5, realm="cyburity.tk", nonce="7ecfc1ff"
[Jun 12 09:28:26] Content-Length: 0
[Jun 12 09:28:26]
[Jun 12 09:28:26]
[Jun 12 09:28:26] <------------>
[Jun 12 09:28:26] Scheduling destruction of SIP dialog 'umejua6b0p2bs8li5plnol' in 32000 ms (Method: REGISTER)
[Jun 12 09:28:28]
[Jun 12 09:28:28] <--- SIP read from UDP:76.110.127.205:35978 --->
[Jun 12 09:28:28]
[Jun 12 09:28:28]
[Jun 12 09:28:28] <------------->
[Jun 12 09:28:29]   == WebSocket connection from 'xx1.171.xx.x:60751' for protocol 'sip' accepted using version '13'
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] REGISTER sip:xx1.171.xx.x SIP/2.0
[Jun 12 09:28:30] Via: SIP/2.0/TCP 192.0.2.218;branch=z9hG4bK2555983
[Jun 12 09:28:30] To: "2222" <sip:2222@xx1.171.xx.x>
[Jun 12 09:28:30] From: "2222" <sip:2222@xx1.171.xx.x>;tag=2caclbpj8d
[Jun 12 09:28:30] CSeq: 5594 REGISTER
[Jun 12 09:28:30] Call-ID: ndgfl0oaeb75rbvca0bsud
[Jun 12 09:28:30] Max-Forwards: 70
[Jun 12 09:28:30] Contact: <sip:18s70scg@192.0.2.218;transport=wss>;expires=600
[Jun 12 09:28:30] Allow: ACK,CANCEL,INVITE,MESSAGE,BYE,OPTIONS,INFO,NOTIFY,REFER
[Jun 12 09:28:30] Supported: outbound, path, gruu
[Jun 12 09:28:30] User-Agent: VICIphone 2.0
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------->
[Jun 12 09:28:30] --- (12 headers 0 lines) ---
[Jun 12 09:28:30] Sending to xx1.171.xx.x:60751 (NAT)
[Jun 12 09:28:30] Sending to xx1.171.xx.x:60751 (NAT)
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- Transmitting (NAT) to xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] SIP/2.0 401 Unauthorized
[Jun 12 09:28:30] Via: SIP/2.0/TCP 192.0.2.218;branch=z9hG4bK2555983;received=xx1.171.xx.x;rport=60751
[Jun 12 09:28:30] From: "2222" <sip:2222@xx1.171.xx.x>;tag=2caclbpj8d
[Jun 12 09:28:30] To: "2222" <sip:2222@xx1.171.xx.x>;tag=as0c812ff7
[Jun 12 09:28:30] Call-ID: ndgfl0oaeb75rbvca0bsud
[Jun 12 09:28:30] CSeq: 5594 REGISTER
[Jun 12 09:28:30] Server: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:30] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:30] Supported: replaces, timer
[Jun 12 09:28:30] WWW-Authenticate: Digest algorithm=MD5, realm="cyburity.tk", nonce="5a59971d"
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------>
[Jun 12 09:28:30] Scheduling destruction of SIP dialog 'ndgfl0oaeb75rbvca0bsud' in 32000 ms (Method: REGISTER)
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] REGISTER sip:xx1.171.xx.x SIP/2.0
[Jun 12 09:28:30] Via: SIP/2.0/TCP 192.0.2.218;branch=z9hG4bK6408062
[Jun 12 09:28:30] To: "2222" <sip:2222@xx1.171.xx.x>
[Jun 12 09:28:30] From: "2222" <sip:2222@xx1.171.xx.x>;tag=2caclbpj8d
[Jun 12 09:28:30] CSeq: 5595 REGISTER
[Jun 12 09:28:30] Call-ID: ndgfl0oaeb75rbvca0bsud
[Jun 12 09:28:30] Max-Forwards: 70
[Jun 12 09:28:30] Authorization: Digest algorithm=MD5, username="2222", realm="cyburity.tk", nonce="5a59971d", uri="sip:xx1.171.xx.x", response="997e9db6adacbc38e474e7277f7c9972"
[Jun 12 09:28:30] Contact: <sip:18s70scg@192.0.2.218;transport=wss>;expires=600
[Jun 12 09:28:30] Allow: ACK,CANCEL,INVITE,MESSAGE,BYE,OPTIONS,INFO,NOTIFY,REFER
[Jun 12 09:28:30] Supported: outbound, path, gruu
[Jun 12 09:28:30] User-Agent: VICIphone 2.0
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------->
[Jun 12 09:28:30] --- (13 headers 0 lines) ---
[Jun 12 09:28:30] Sending to xx1.171.xx.x:60751 (NAT)
[Jun 12 09:28:30]     -- Registered SIP '2222' at xx1.171.xx.x:60751
[Jun 12 09:28:30] Reliably Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:28:30] OPTIONS sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:28:30] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK09093d89;rport
[Jun 12 09:28:30] Max-Forwards: 70
[Jun 12 09:28:30] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as42294779
[Jun 12 09:28:30] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:30] Contact: <sip:asterisk@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:30] Call-ID: 423fc67b6896944204cad2b5461d98e1@xx1.171.xx.x:5060
[Jun 12 09:28:30] CSeq: 102 OPTIONS
[Jun 12 09:28:30] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:30] Date: Fri, 12 Jun 2020 13:28:30 GMT
[Jun 12 09:28:30] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:30] Supported: replaces, timer
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30]
[Jun 12 09:28:30] ---
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- Transmitting (NAT) to xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] SIP/2.0 200 OK
[Jun 12 09:28:30] Via: SIP/2.0/TCP 192.0.2.218;branch=z9hG4bK6408062;received=xx1.171.xx.x;rport=60751
[Jun 12 09:28:30] From: "2222" <sip:2222@xx1.171.xx.x>;tag=2caclbpj8d
[Jun 12 09:28:30] To: "2222" <sip:2222@xx1.171.xx.x>;tag=as0c812ff7
[Jun 12 09:28:30] Call-ID: ndgfl0oaeb75rbvca0bsud
[Jun 12 09:28:30] CSeq: 5595 REGISTER
[Jun 12 09:28:30] Server: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:30] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:30] Supported: replaces, timer
[Jun 12 09:28:30] Expires: 600
[Jun 12 09:28:30] Contact: <sip:18s70scg@192.0.2.218;transport=wss>;expires=600
[Jun 12 09:28:30] Date: Fri, 12 Jun 2020 13:28:30 GMT
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------>
[Jun 12 09:28:30] Scheduling destruction of SIP dialog '52389f23727c297b3e045a1e77f9e0e0@xx1.171.xx.x:5060' in 6400 ms (Method: NOTIFY)
[Jun 12 09:28:30] Reliably Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:28:30] NOTIFY sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:28:30] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK295a54ea;rport
[Jun 12 09:28:30] Max-Forwards: 70
[Jun 12 09:28:30] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as28ac362b
[Jun 12 09:28:30] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:30] Contact: <sip:asterisk@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:30] Call-ID: 52389f23727c297b3e045a1e77f9e0e0@xx1.171.xx.x:5060
[Jun 12 09:28:30] CSeq: 102 NOTIFY
[Jun 12 09:28:30] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:30] Event: message-summary
[Jun 12 09:28:30] Content-Type: application/simple-message-summary
[Jun 12 09:28:30] Content-Length: 107
[Jun 12 09:28:30]
[Jun 12 09:28:30] Messages-Waiting: no
[Jun 12 09:28:30] Message-Account: sip:asterisk@xx1.171.xx.x;transport=WS
[Jun 12 09:28:30] Voice-Message: 0/0 (0/0)
[Jun 12 09:28:30]
[Jun 12 09:28:30] ---
[Jun 12 09:28:30] Scheduling destruction of SIP dialog 'ndgfl0oaeb75rbvca0bsud' in 32000 ms (Method: REGISTER)
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] SIP/2.0 200 OK
[Jun 12 09:28:30] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK09093d89;rport
[Jun 12 09:28:30] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as42294779
[Jun 12 09:28:30] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=8nmb4j28cr
[Jun 12 09:28:30] CSeq: 102 OPTIONS
[Jun 12 09:28:30] Call-ID: 423fc67b6896944204cad2b5461d98e1@xx1.171.xx.x:5060
[Jun 12 09:28:30] Supported: outbound
[Jun 12 09:28:30] User-Agent: VICIphone 2.0
[Jun 12 09:28:30] Allow: ACK,BYE,CANCEL,INFO,INVITE,MESSAGE,NOTIFY,OPTIONS,PRACK,REFER,REGISTER,SUBSCRIBE
[Jun 12 09:28:30] Accept: application/sdp,application/dtmf-relay
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------->
[Jun 12 09:28:30] --- (11 headers 0 lines) ---
[Jun 12 09:28:30]
[Jun 12 09:28:30] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:30] SIP/2.0 481 Call/Transaction Does Not Exist
[Jun 12 09:28:30] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK295a54ea;rport
[Jun 12 09:28:30] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as28ac362b
[Jun 12 09:28:30] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=2vkm928jpc
[Jun 12 09:28:30] CSeq: 102 NOTIFY
[Jun 12 09:28:30] Call-ID: 52389f23727c297b3e045a1e77f9e0e0@xx1.171.xx.x:5060
[Jun 12 09:28:30] Supported: outbound
[Jun 12 09:28:30] User-Agent: VICIphone 2.0
[Jun 12 09:28:30] Content-Length: 0
[Jun 12 09:28:30]
[Jun 12 09:28:30] <------------->
[Jun 12 09:28:30] --- (9 headers 0 lines) ---
[Jun 12 09:28:31] Really destroying SIP dialog '423fc67b6896944204cad2b5461d98e1@xx1.171.xx.x:5060' Method: OPTIONS
[Jun 12 09:28:31] Really destroying SIP dialog '52389f23727c297b3e045a1e77f9e0e0@xx1.171.xx.x:5060' Method: NOTIFY
[Jun 12 09:28:31] Really destroying SIP dialog '1ffa144c100cff2617ee78a271da90e5@xx1.171.xx.x:5060' Method: INVITE
[Jun 12 09:28:33]   == Manager 'sendcron' logged on from 127.0.0.1
[Jun 12 09:28:33]   == Using SIP RTP CoS mark 5
[Jun 12 09:28:33] Audio is at 10228
[Jun 12 09:28:33] Adding codec ulaw to SDP
[Jun 12 09:28:33] Adding codec alaw to SDP
[Jun 12 09:28:33] Adding codec gsm to SDP
[Jun 12 09:28:33] Adding non-codec 0x1 (telephone-event) to SDP
[Jun 12 09:28:33] Reliably Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:28:33] INVITE sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:28:33] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK005fc234;rport
[Jun 12 09:28:33] Max-Forwards: 70
[Jun 12 09:28:33] From: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as10894185
[Jun 12 09:28:33] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:33] Contact: <sip:202xxx8707@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:33] Call-ID: 27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060
[Jun 12 09:28:33] CSeq: 102 INVITE
[Jun 12 09:28:33] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:33] Date: Fri, 12 Jun 2020 13:28:33 GMT
[Jun 12 09:28:33] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:33] Supported: replaces, timer
[Jun 12 09:28:33] Remote-Party-ID: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;party=calling;privacy=off;screen=no
[Jun 12 09:28:33] Content-Type: application/sdp
[Jun 12 09:28:33] Content-Length: 694
[Jun 12 09:28:33]
[Jun 12 09:28:33] v=0
[Jun 12 09:28:33] o=root 1265590450 1265590450 IN IP4 xx1.171.xx.x
[Jun 12 09:28:33] s=Asterisk PBX 13.32.0-vici
[Jun 12 09:28:33] c=IN IP4 xx1.171.xx.x
[Jun 12 09:28:33] t=0 0
[Jun 12 09:28:33] m=audio 10228 RTP/SAVPF 0 8 3 101
[Jun 12 09:28:33] a=rtpmap:0 PCMU/8000
[Jun 12 09:28:33] a=rtpmap:8 PCMA/8000
[Jun 12 09:28:33] a=rtpmap:3 GSM/8000
[Jun 12 09:28:33] a=rtpmap:101 telephone-event/8000
[Jun 12 09:28:33] a=fmtp:101 0-16
[Jun 12 09:28:33] a=ptime:20
[Jun 12 09:28:33] a=maxptime:150
[Jun 12 09:28:33] a=ice-ufrag:478bbaab38a2a10451b23ee53b17003c
[Jun 12 09:28:33] a=ice-pwd:7b28ee400f6613f3065a691104a8595e
[Jun 12 09:28:33] a=candidate:H1fab84d5 1 UDP 2130706431 xx1.171.xx.x 10228 typ host
[Jun 12 09:28:33] a=candidate:H1fab84d5 2 UDP 2130706430 xx1.171.xx.x 10229 typ host
[Jun 12 09:28:33] a=connection:new
[Jun 12 09:28:33] a=setup:actpass
[Jun 12 09:28:33] a=fingerprint:SHA-256 A5:F5:5B:36:D1:74:DD:85:B3:D8:44:0D:ED:D3:E9:A0:4B:34:C7:E7:8F:B0:CA:AF:34:DB:44:BA:BB:83:04:05
[Jun 12 09:28:33] a=sendrecv
[Jun 12 09:28:33]
[Jun 12 09:28:33] ---
[Jun 12 09:28:33]     -- Called 2222
[Jun 12 09:28:33]
[Jun 12 09:28:33] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:33] SIP/2.0 100 Trying
[Jun 12 09:28:33] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK005fc234;rport
[Jun 12 09:28:33] From: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as10894185
[Jun 12 09:28:33] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:33] CSeq: 102 INVITE
[Jun 12 09:28:33] Call-ID: 27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060
[Jun 12 09:28:33] Supported: outbound
[Jun 12 09:28:33] User-Agent: VICIphone 2.0
[Jun 12 09:28:33] Content-Length: 0
[Jun 12 09:28:33]
[Jun 12 09:28:33] <------------->
[Jun 12 09:28:33] --- (9 headers 0 lines) ---
[Jun 12 09:28:33]
[Jun 12 09:28:33] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:33] SIP/2.0 180 Ringing
[Jun 12 09:28:33] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK005fc234;rport
[Jun 12 09:28:33] From: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as10894185
[Jun 12 09:28:33] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=8g8bg611he
[Jun 12 09:28:33] CSeq: 102 INVITE
[Jun 12 09:28:33] Call-ID: 27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060
[Jun 12 09:28:33] Supported: outbound
[Jun 12 09:28:33] User-Agent: VICIphone 2.0
[Jun 12 09:28:33] Contact: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:33] Content-Length: 0
[Jun 12 09:28:33]
[Jun 12 09:28:33] <------------->
[Jun 12 09:28:33] --- (10 headers 0 lines) ---
[Jun 12 09:28:33] sip_route_dump: route/path hop: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:33]     -- SIP/2222-00000005 is ringing
[Jun 12 09:28:33]
[Jun 12 09:28:33] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:33] SIP/2.0 480 Temporarily Unavailable
[Jun 12 09:28:33] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK005fc234;rport
[Jun 12 09:28:33] From: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as10894185
[Jun 12 09:28:33] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=8g8bg611he
[Jun 12 09:28:33] CSeq: 102 INVITE
[Jun 12 09:28:33] Call-ID: 27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060
[Jun 12 09:28:33] Supported: outbound
[Jun 12 09:28:33] User-Agent: VICIphone 2.0
[Jun 12 09:28:33] Content-Length: 0
[Jun 12 09:28:33]
[Jun 12 09:28:33] <------------->
[Jun 12 09:28:33] --- (9 headers 0 lines) ---
[Jun 12 09:28:33] Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:28:33] ACK sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:28:33] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK005fc234;rport
[Jun 12 09:28:33] Max-Forwards: 70
[Jun 12 09:28:33] From: "ACagcW15919685122222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as10894185
[Jun 12 09:28:33] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=8g8bg611he
[Jun 12 09:28:33] Contact: <sip:202xxx8707@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:33] Call-ID: 27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060
[Jun 12 09:28:33] CSeq: 102 ACK
[Jun 12 09:28:33] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:33] Content-Length: 0
[Jun 12 09:28:33]
[Jun 12 09:28:33]
[Jun 12 09:28:33] ---
[Jun 12 09:28:33]     -- SIP/2222-00000005 is busy
[Jun 12 09:28:33] Scheduling destruction of SIP dialog '27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:28:34]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:28:34]
[Jun 12 09:28:34] <--- SIP read from UDP:xx1.171.xx.x:5060 --->
[Jun 12 09:28:34]
[Jun 12 09:28:34]
[Jun 12 09:28:34] <------------->
[Jun 12 09:28:40] Really destroying SIP dialog '27285e18662b1446606fc5bf7e8f6432@xx1.171.xx.x:5060' Method: INVITE
[Jun 12 09:28:47] Really destroying SIP dialog 'cuZoK8c5DmKnJnJF4LupYw..' Method: REGISTER
[Jun 12 09:28:51] Reliably Transmitting (no NAT) to 1X2.212.218.xx:5060:
[Jun 12 09:28:51] OPTIONS sip:1X2.212.218.xx SIP/2.0
[Jun 12 09:28:51] Via: SIP/2.0/UDP xx1.171.xx.x:5060;branch=z9hG4bK742729f2
[Jun 12 09:28:51] Max-Forwards: 70
[Jun 12 09:28:51] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as7a291737
[Jun 12 09:28:51] To: <sip:1X2.212.218.xx>
[Jun 12 09:28:51] Contact: <sip:asterisk@xx1.171.xx.x:5060>
[Jun 12 09:28:51] Call-ID: 23e32801001b5241764a9c3266203e5f@xx1.171.xx.x:5060
[Jun 12 09:28:51] CSeq: 102 OPTIONS
[Jun 12 09:28:51] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:51] Date: Fri, 12 Jun 2020 13:28:51 GMT
[Jun 12 09:28:51] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:51] Supported: replaces, timer
[Jun 12 09:28:51] Content-Length: 0
[Jun 12 09:28:51]
[Jun 12 09:28:51]
[Jun 12 09:28:51] ---
[Jun 12 09:28:51]
[Jun 12 09:28:51] <--- SIP read from UDP:1X2.212.218.xx:5060 --->
[Jun 12 09:28:51] SIP/2.0 200 ok
[Jun 12 09:28:51] Via: SIP/2.0/UDP xx1.171.xx.x:5060;branch=z9hG4bK742729f2
[Jun 12 09:28:51] From: "asterisk" <sip:asterisk@xx1.171.xx.x>;tag=as7a291737
[Jun 12 09:28:51] To: <sip:1X2.212.218.xx>;tag=3348068d66121f4810c19dd2a2f673ed.07fd
[Jun 12 09:28:51] Call-ID: 23e32801001b5241764a9c3266203e5f@xx1.171.xx.x:5060
[Jun 12 09:28:51] CSeq: 102 OPTIONS
[Jun 12 09:28:51] Server: AlcazarProxy 1.30
[Jun 12 09:28:51] Content-Length: 0
[Jun 12 09:28:51]
[Jun 12 09:28:51] <------------->
[Jun 12 09:28:51] --- (8 headers 0 lines) ---
[Jun 12 09:28:51] Really destroying SIP dialog '23e32801001b5241764a9c3266203e5f@xx1.171.xx.x:5060' Method: OPTIONS
[Jun 12 09:28:56]   == Manager 'sendcron' logged on from 127.0.0.1
[Jun 12 09:28:56]   == Using SIP RTP CoS mark 5
[Jun 12 09:28:56] Audio is at 18528
[Jun 12 09:28:56] Adding codec ulaw to SDP
[Jun 12 09:28:56] Adding codec alaw to SDP
[Jun 12 09:28:56] Adding codec gsm to SDP
[Jun 12 09:28:56] Adding non-codec 0x1 (telephone-event) to SDP
[Jun 12 09:28:56] Reliably Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:28:56] INVITE sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:28:56] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:28:56] Max-Forwards: 70
[Jun 12 09:28:56] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:28:56] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:56] Contact: <sip:202xxx8707@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:28:56] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:28:56] CSeq: 102 INVITE
[Jun 12 09:28:56] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:28:56] Date: Fri, 12 Jun 2020 13:28:56 GMT
[Jun 12 09:28:56] Allow: INVITE, ACK, CANCEL, OPTIONS, BYE, REFER, SUBSCRIBE, NOTIFY, INFO, PUBLISH, MESSAGE
[Jun 12 09:28:56] Supported: replaces, timer
[Jun 12 09:28:56] Remote-Party-ID: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;party=calling;privacy=off;screen=no
[Jun 12 09:28:56] Content-Type: application/sdp
[Jun 12 09:28:56] Content-Length: 694
[Jun 12 09:28:56]
[Jun 12 09:28:56] v=0
[Jun 12 09:28:56] o=root 1926833548 1926833548 IN IP4 xx1.171.xx.x
[Jun 12 09:28:56] s=Asterisk PBX 13.32.0-vici
[Jun 12 09:28:56] c=IN IP4 xx1.171.xx.x
[Jun 12 09:28:56] t=0 0
[Jun 12 09:28:56] m=audio 18528 RTP/SAVPF 0 8 3 101
[Jun 12 09:28:56] a=rtpmap:0 PCMU/8000
[Jun 12 09:28:56] a=rtpmap:8 PCMA/8000
[Jun 12 09:28:56] a=rtpmap:3 GSM/8000
[Jun 12 09:28:56] a=rtpmap:101 telephone-event/8000
[Jun 12 09:28:56] a=fmtp:101 0-16
[Jun 12 09:28:56] a=ptime:20
[Jun 12 09:28:56] a=maxptime:150
[Jun 12 09:28:56] a=ice-ufrag:60eb87497a76de4e7ffa7bb63618c61d
[Jun 12 09:28:56] a=ice-pwd:5b45bb9c1b06b8151b6685ff17af4cda
[Jun 12 09:28:56] a=candidate:H1fab84d5 1 UDP 2130706431 xx1.171.xx.x 18528 typ host
[Jun 12 09:28:56] a=candidate:H1fab84d5 2 UDP 2130706430 xx1.171.xx.x 18529 typ host
[Jun 12 09:28:56] a=connection:new
[Jun 12 09:28:56] a=setup:actpass
[Jun 12 09:28:56] a=fingerprint:SHA-256 A5:F5:5B:36:D1:74:DD:85:B3:D8:44:0D:ED:D3:E9:A0:4B:34:C7:E7:8F:B0:CA:AF:34:DB:44:BA:BB:83:04:05
[Jun 12 09:28:56] a=sendrecv
[Jun 12 09:28:56]
[Jun 12 09:28:56] ---
[Jun 12 09:28:56]     -- Called 2222
[Jun 12 09:28:56]
[Jun 12 09:28:56] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:56] SIP/2.0 100 Trying
[Jun 12 09:28:56] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:28:56] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:28:56] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:56] CSeq: 102 INVITE
[Jun 12 09:28:56] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:28:56] Supported: outbound
[Jun 12 09:28:56] User-Agent: VICIphone 2.0
[Jun 12 09:28:56] Content-Length: 0
[Jun 12 09:28:56]
[Jun 12 09:28:56] <------------->
[Jun 12 09:28:56] --- (9 headers 0 lines) ---
[Jun 12 09:28:56]
[Jun 12 09:28:56] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:28:56] SIP/2.0 180 Ringing
[Jun 12 09:28:56] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:28:56] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:28:56] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=n9g11ribc3
[Jun 12 09:28:56] CSeq: 102 INVITE
[Jun 12 09:28:56] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:28:56] Supported: outbound
[Jun 12 09:28:56] User-Agent: VICIphone 2.0
[Jun 12 09:28:56] Contact: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:56] Content-Length: 0
[Jun 12 09:28:56]
[Jun 12 09:28:56] <------------->
[Jun 12 09:28:56] --- (10 headers 0 lines) ---
[Jun 12 09:28:56] sip_route_dump: route/path hop: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:28:56]     -- SIP/2222-00000006 is ringing
[Jun 12 09:28:58]
[Jun 12 09:28:58] <------------->
[Jun 12 09:28:59] Really destroying SIP dialog 'umejua6b0p2bs8li5plnol' Method: REGISTER
[Jun 12 09:28:59] ERROR[4869]: utils.c:1499 ast_careful_fwrite: fflush() returned error: Bad file descriptor
[Jun 12 09:28:59] ERROR[4869]: tcptls.c:488 tcptls_stream_close: SSL_shutdown() failed: error:00000005:lib(0):func(0):DH lib, Underlying BIO error: Bad file descriptor
[Jun 12 09:28:59]   == WebSocket connection from 'xx1.171.xx.x:60747' forcefully closed due to fatal write error
[Jun 12 09:29:00]
[Jun 12 09:29:00] ---
[Jun 12 09:29:00]
[Jun 12 09:29:00]
[Jun 12 09:29:06]     -- Manager 'sendcron' from 127.0.0.1, hanging up channel: SIP/2222-00000006
[Jun 12 09:29:06] Scheduling destruction of SIP dialog '5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:29:06] Reliably Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:29:06] CANCEL sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:29:06] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:29:06] Max-Forwards: 70
[Jun 12 09:29:06] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:29:06] To: <sip:18s70scg@192.0.2.218;transport=wss>
[Jun 12 09:29:06] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:29:06] CSeq: 102 CANCEL
[Jun 12 09:29:06] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:29:06] Content-Length: 0
[Jun 12 09:29:06]
[Jun 12 09:29:06]
[Jun 12 09:29:06] ---
[Jun 12 09:29:06] Scheduling destruction of SIP dialog '5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:29:06]
[Jun 12 09:29:06] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:29:06] SIP/2.0 200 OK
[Jun 12 09:29:06] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:29:06] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:29:06] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=ep91a2imar
[Jun 12 09:29:06] CSeq: 102 CANCEL
[Jun 12 09:29:06] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:29:06] Supported: outbound
[Jun 12 09:29:06] User-Agent: VICIphone 2.0
[Jun 12 09:29:06] Content-Length: 0
[Jun 12 09:29:06]
[Jun 12 09:29:06] <------------->
[Jun 12 09:29:06] --- (9 headers 0 lines) ---
[Jun 12 09:29:06]
[Jun 12 09:29:06] <--- SIP read from WS:xx1.171.xx.x:60751 --->
[Jun 12 09:29:06] SIP/2.0 487 Request Terminated
[Jun 12 09:29:06] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:29:06] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:29:06] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=n9g11ribc3
[Jun 12 09:29:06] CSeq: 102 INVITE
[Jun 12 09:29:06] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:29:06] Supported: outbound
[Jun 12 09:29:06] User-Agent: VICIphone 2.0
[Jun 12 09:29:06] Content-Length: 0
[Jun 12 09:29:06]
[Jun 12 09:29:06] <------------->
[Jun 12 09:29:06] --- (9 headers 0 lines) ---
[Jun 12 09:29:06] Transmitting (NAT) to xx1.171.xx.x:60751:
[Jun 12 09:29:06] ACK sip:18s70scg@192.0.2.218;transport=wss SIP/2.0
[Jun 12 09:29:06] Via: SIP/2.0/WS xx1.171.xx.x:5060;branch=z9hG4bK3ce6f173;rport
[Jun 12 09:29:06] Max-Forwards: 70
[Jun 12 09:29:06] From: "ACagcW15919685352222222222222222" <sip:202xxx8707@xx1.171.xx.x>;tag=as2e59afb1
[Jun 12 09:29:06] To: <sip:18s70scg@192.0.2.218;transport=wss>;tag=n9g11ribc3
[Jun 12 09:29:06] Contact: <sip:202xxx8707@xx1.171.xx.x:5060;transport=ws>
[Jun 12 09:29:06] Call-ID: 5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060
[Jun 12 09:29:06] CSeq: 102 ACK
[Jun 12 09:29:06] User-Agent: Asterisk PBX 13.32.0-vici
[Jun 12 09:29:06] Content-Length: 0
[Jun 12 09:29:06]
[Jun 12 09:29:06]
[Jun 12 09:29:06] ---
[Jun 12 09:29:06] Scheduling destruction of SIP dialog '5a1745f518bc2fca26ac8cf21c854eda@xx1.171.xx.x:5060' in 6400 ms (Method: INVITE)
[Jun 12 09:29:06]   == Manager 'sendcron' logged on from 127.0.0.1
[Jun 12 09:29:06]     -- Called 55558600051@default
[Jun 12 09:29:06]     -- Executing [55558600051@default:1] MeetMeAdmin("Local/55558600051@default-00000002;2", "8600051,K") in new stack
[Jun 12 09:29:06] WARNING[8760][C-00000002]: app_meetme.c:5261 admin_exec: Conference number '8600051' not found!
[Jun 12 09:29:06]     -- Executing [55558600051@default:2] Hangup("Local/55558600051@default-00000002;2", "") in new stack
[Jun 12 09:29:06]   == Spawn extension (default, 55558600051, 2) exited non-zero on 'Local/55558600051@default-00000002;2'
[Jun 12 09:29:06] WARNING[8760][C-00000002]: func_hangupcause.c:140 hangupcause_read: Unable to find information for channel
[Jun 12 09:29:06]     -- Executing [h@default:1] AGI("Local/55558600051@default-00000002;2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------)") in new stack
[Jun 12 09:29:06]     -- <Local/55558600051@default-00000002;2>AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16--------------------) completed, returning 0
[Jun 12 09:29:07]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:29:07]   == Manager 'sendcron' logged off from 127.0.0.1
[Jun 12 09:29:07]   == Manager 'sendcron' logged off from 127.0.0.1
cyburity*CLI> exit
[Jun 12 09:29:09] Asterisk cleanly ending (0).
Alma Linux 9.4 | SVN Version: 3889 | DB Schema Version: 1721 | Asterisk 18.21.1 | PHP8
www.dialer.one -:- 1-833-DIALER-1 -:- https://linktr.ee/CyburDial -:- WA: +19549477572
GC: https://join.skype.com/ujkQ7i5lV78O | DC: https://discord.gg/DVktk6smbh
carpenox
 
Posts: 2418
Joined: Wed Apr 08, 2020 2:02 am
Location: St Petersburg, FL

Next

Return to Development

Who is online

Users browsing this forum: No registered users and 14 guests