ERROR zaptel.conf.t100p.sample and zaptel.conf.x100p.sample

[eijal]

The files zaptel.conf.t100p.sample and zaptel.conf.x100p.sample in /usr/src/astguiclient/agc_2-X/trunk/docs/conf_examples are:

Code: Select all

; /etc/zaptel.conf:
; Digium/Clone T100P EXAMPLE:
; Here is an example of a configuration where an T100P single T1 card is used
; for connecting a single T1 PRI circuit with 23 voice channels

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us

; FOR A RBS WinkStart T1 YOU WOULD USE SOMETHING LIKE THIS:
; span=1,1,0,esf,b8zs
; e&m=1-24
; loadzone = us
; defaultzone=us
;
; FOR AN ANALOG T1 ChannelBank YOU WOULD USE SOMETHING LIKE THIS:
; span=1,1,0,esf,b8zs
; fxoks=1-24
; loadzone = us
; defaultzone=us
;


AND

Code: Select all

; /etc/zaptel.conf:
; Digium/Clone X100P EXAMPLE:
; Here is an example of a configuration where an X100P single FXO card is used
; for zaptel timing and not used for calling:
;
; NOTE: you can get an X100P on ebay for $10-30 that will work with Asterisk

loadzone=us
defaultzone=us
fxsks=1


And they must be:

Code: Select all

# /etc/zaptel.conf:
# Digium/Clone T100P EXAMPLE:
# Here is an example of a configuration where an T100P single T1 card is used
# for connecting a single T1 PRI circuit with 23 voice channels

span=1,1,0,esf,b8zs
bchan=1-23
dchan=24
loadzone = us
defaultzone=us

# FOR A RBS WinkStart T1 YOU WOULD USE SOMETHING LIKE THIS:
# span=1,1,0,esf,b8zs
# e&m=1-24
# loadzone = us
# defaultzone=us
#
# FOR AN ANALOG T1 ChannelBank YOU WOULD USE SOMETHING LIKE THIS:
# span=1,1,0,esf,b8zs
# fxoks=1-24
# loadzone = us
# defaultzone=us
#


AND

Code: Select all

# /etc/zaptel.conf:
# Digium/Clone X100P EXAMPLE:
# Here is an example of a configuration where an X100P single FXO card is used
# for zaptel timing and not used for calling:
#
# NOTE: you can get an X100P on ebay for $10-30 that will work with Asterisk

loadzone=us
defaultzone=us
fxsks=1


[mflorell]

pesky comments

Thanks

[eijal]

Another pesky comment:
in the directory /usr/src/astguiclient/agc_2-X/trunk/docs/conf_examples, the comments of zapata.conf.t100p.example and zapata.conf.x100p.example begin with
############# and they must begin with
;;;;;;;;;;;;;;;;;;;;;;;;;;

Thanks

[mflorell]

I was one step ahead of you on that, changed those at the same time

[eijal]

I was one step ahead of you on that, changed those at the same time

Still the same error with the comments

bye

[Op3r]

I think matt is saying that he changed it to the svn

[eijal]

I think matt is saying that he changed it to the svn

If you see the svn, the mistake is still there