how to point all the recordings to other hard drive

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

how to point all the recordings to other hard drive

Postby spectabil » Thu May 29, 2014 12:21 pm

Does anyone knows here how to point the recordings path to another harddrive like for example i have sda which is the primary hard drive and sda is the secondary hard drive..what we want is to land all the recordings to the secondary hard drive..

pls help .

Thanks.1
GOautodial CE 3.0 from 2.1 | Asterisk 1.8.26.1-vici | Single-Server | No Digium/Sangoma Hardware | No Extra Software After Installation |
spectabil
 
Posts: 11
Joined: Sat May 17, 2014 7:40 pm

Re: how to point all the recordings to other hard drive

Postby mav2287 » Thu May 29, 2014 5:30 pm

Are you wanting all recording on that drive or are you just wanting to have final recordings. It wouldn't be hard at all to write a crontab script similar to the one used to ftp files to a different server to accomplish this.

If you only want finalized recording you should be able to change the paths in the existing crontab scripts for recording processing.
ViciBox5.x86_64-5.0.3.preload from .iso upgraded to 13.1 | VERSION: 2.10-444c BUILD: 150129-0828 | 1.8.32.2-vici | Dual Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel twin quad core 3Ghz Xeon chips | 32gb of RAM
mav2287
 
Posts: 256
Joined: Thu Oct 03, 2013 6:47 pm

Re: how to point all the recordings to other hard drive

Postby spectabil » Fri May 30, 2014 6:24 am

we want all the process recordings will goes to other hard drive not n the primary hard drive ..
GOautodial CE 3.0 from 2.1 | Asterisk 1.8.26.1-vici | Single-Server | No Digium/Sangoma Hardware | No Extra Software After Installation |
spectabil
 
Posts: 11
Joined: Sat May 17, 2014 7:40 pm

Re: how to point all the recordings to other hard drive

Postby mav2287 » Fri May 30, 2014 5:22 pm

In that case I believe you should be able to go into the astguiclient.conf file and aim the "PATHDONEmonitor => /var/spool/asterisk/monitorDONE" to the directory where you want the files.
ViciBox5.x86_64-5.0.3.preload from .iso upgraded to 13.1 | VERSION: 2.10-444c BUILD: 150129-0828 | 1.8.32.2-vici | Dual Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel twin quad core 3Ghz Xeon chips | 32gb of RAM
mav2287
 
Posts: 256
Joined: Thu Oct 03, 2013 6:47 pm


Return to Support

Who is online

Users browsing this forum: No registered users and 107 guests