http://www.cisco.com/web/consumer/suppo ... C3825.html
set to always give 192.168.0.99 to the server through a pre-assigned DHCP address reserved by MAC address. I clicked "server" and entered the ip address for the server:
- Code: Select all
SERVER LISTINGS:
SERVER ID NAME SERVER IP ACTIVE AGENT ASTERISK TRUNKS GMT MODIFY
linux-k7qk Server linux-k7qk 192.168.0.99 Y Y 1.8.29.0-vici 23 -5.00 MODIFY
why doesn't this change propagate to astguiclient.conf?
- Code: Select all
linux-k7qk:~ #
linux-k7qk:~ #
linux-k7qk:~ # /usr/share/astguiclient/ADMIN_update_server_ip.pl
Previous astGUIclient configuration file found at: /etc/astguiclient.conf
Would you like to use interactive mode (y/n): [y] n
Writing change to astguiclient.conf file: /etc/astguiclient.conf
STARTING DATABASE TABLES UPDATES PHASE...
Updating servers table...
|1|UPDATE servers SET server_ip='' where server_ip='192.168.0.99';|
Updating phones table...
|4|UPDATE phones SET server_ip='' where server_ip='192.168.0.99';|
Updating inbound_numbers table...
|0E0|UPDATE inbound_numbers SET server_ip='' where server_ip='192.168.0.99';|
Updating server_updater table...
|1|UPDATE server_updater SET server_ip='' where server_ip='192.168.0.99';|
Updating conferences table...
|49|UPDATE conferences SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_conferences table...
|249|UPDATE vicidial_conferences SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_stations table...
|0E0|UPDATE vicidial_stations SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_remote_agents table...
|0E0|UPDATE vicidial_remote_agents SET server_ip='' where server_ip='192.168.0.99';|
Updating phone_favorites table...
|0E0|UPDATE phone_favorites SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_server_trunks table...
|0E0|UPDATE vicidial_server_trunks SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_server_carriers table...
|1|UPDATE vicidial_server_carriers SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_inbound_dids table...
|0E0|UPDATE vicidial_inbound_dids SET server_ip='' where server_ip='192.168.0.99';|
Updating vicidial_process_triggers table...
|0E0|UPDATE vicidial_process_triggers SET server_ip='' where server_ip='192.168.0.99';|
Setting servers to rebuild conf files...
|1|UPDATE servers SET rebuild_conf_files='Y' where generate_vicidial_conf='Y' and active_asterisk_server='Y';|
SERVER IP ADDRESS CHANGE FOR VICIDIAL FINISHED!
- process runtime (5 sec) (0.0833333333333333 minutes)
linux-k7qk:~ #
linux-k7qk:~ # cat /etc/astguiclient.conf
# astguiclient.conf - configuration elements for the astguiclient package
# this is the astguiclient configuration file
# all comments will be lost if you run install.pl again
# Paths used by astGUIclient
PATHhome => /usr/share/astguiclient
PATHlogs => /var/log/astguiclient
PATHagi => /var/lib/asterisk/agi-bin
PATHweb => /srv/www/htdocs
PATHsounds => /var/lib/asterisk/sounds
PATHmonitor => /var/spool/asterisk/monitor
PATHDONEmonitor => /var/spool/asterisk/monitorDONE
# The IP address of this machine
VARserver_ip =>
# Database connection information
VARDB_server => localhost
VARDB_database => asterisk
VARDB_user => cron
VARDB_pass => 1234
VARDB_custom_user => custom
VARDB_custom_pass => custom1234
VARDB_port => 3306
# Alpha-Numeric list of the astGUIclient processes to be kept running
# (value should be listing of characters with no spaces: 123456)
# X - NO KEEPALIVE PROCESSES (use only if you want none to be keepalive)
# 1 - AST_update
# 2 - AST_send_listen
# 3 - AST_VDauto_dial
# 4 - AST_VDremote_agents
# 5 - AST_VDadapt (If multi-server system, this must only be on one server)
# 6 - FastAGI_log
# 7 - AST_VDauto_dial_FILL (only for multi-server, this must only be on one server)
# 8 - ip_relay (used for blind agent monitoring)
# 9 - Timeclock auto logout
VARactive_keepalives => 123456789E
# Asterisk version VICIDIAL is installed for
VARasterisk_version => 1.8
# FTP recording archive connection information
VARFTP_host => 10.0.0.4
VARFTP_user => cron
VARFTP_pass => test
VARFTP_port => 21
VARFTP_dir => RECORDINGS
VARHTTP_path => http://10.0.0.4
# REPORT server connection information
VARREPORT_host => 10.0.0.4
VARREPORT_user => cron
VARREPORT_pass => test
VARREPORT_port => 21
VARREPORT_dir => REPORTS
# Settings for FastAGI logging server
VARfastagi_log_min_servers => 3
VARfastagi_log_max_servers => 16
VARfastagi_log_min_spare_servers => 2
VARfastagi_log_max_spare_servers => 8
VARfastagi_log_max_requests => 1000
VARfastagi_log_checkfordead => 30
VARfastagi_log_checkforwait => 60
# Expected DB Schema version for this install
ExpectedDBSchema => 1406
linux-k7qk:~ #
). Note that the installer version you posted below is useful, but that installer can install ANY version of Vicidial (it will install older versions upon request, and that happens a lot when customizations lock users into specific versions, but they need a fresh server for a new project ...).