TRUNK SHORT/FILL:1230/0

[rudra_ach]

Hi,
I'm getting this TRUNK SHORT in dialer campaign realtime screen
TRUNK SHORT/FILL:1230/0.The shot number is icresing.What is the meaning of that.In this situation the autodial is not going.

I've recompiled the kernel with timer 1000

Please Advice

these are the errors getting

Feb 28 18:57:51 WARNING[13478]: app_meetme.c:1556 conf_run: Unable to write frame to channel: Resource temporarily unavailable

regards
rudra

[mflorell]

How many VICIDIAL trunks is your server set to?

the SHORT number is the number that the dialer wants to dial but cannot because it is more than the number of Maximum trunks set in the server record.

[rudra_ach]

Hi,

we are using g729 and not hardware device is being used.The default server trunk setting is 96

regards
rudra

How many VICIDIAL trunks is your server set to?

the SHORT number is the number that the dialer wants to dial but cannot because it is more than the number of Maximum trunks set in the server record.

[rudra_ach]

Hi,

right now we are dialing with two campaigns.In one it is showing tunk shot 0/0 and inanther it is 500/0.We are in a manual dialing now.

I'm not able to fgure out what could be the problem.I've tried to change the provider but still now change.

regards
rudra

How many VICIDIAL trunks is your server set to?

the SHORT number is the number that the dialer wants to dial but cannot because it is more than the number of Maximum trunks set in the server record.

[mflorell]

If you are manual dialing, then your SHORT shouldn't be anything. Although if you did run as non-Manual and then it could not dial out, then you switched to MANUAL again, the SHORT number could have stuck. But for manual dialing you can ignore the SHORT/FILL numbers.

[eijal]

the SHORT number is the number that the dialer wants to dial but cannot because it is more than the number of Maximum trunks set in the server record.

What about the statuses of those numbers that cannot be dialed?

[mflorell]

There are no statuses, they aren't dialed, the dialer will only dial the concurrent number of calls that are equal to or less than the max_vicidial_trunks variable as set in the servers table.