No Sound when CALLERID(name) is Set

[iboam]

im setting a survey campaing and want to set a caller name and it works randomly but with no sound on the call

[XCAST]
disallow=all
allow=ulaw
allow=alaw
canreinvite=no
type=peer
host=xxx.xxx.xxx.xxx
dtmfmode=rfc2833
qualify=yes
nat=force_rport,comedia
insecure=port,invite
set sendrpid=pai

exten => _817NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _817NXXNXXXXXX,n,Set(CALLERID(name)="Test Name") If remove this part call works perfect but with no custom name, just the caller id number and/or vicidial iud as name
exten => _817NXXNXXXXXX,n,Set(CALLERID(number)=${CALLERID(num)})
exten => _817NXXNXXXXXX,n,SipAddHeader(P-Asserted-Identity: ${CALLERID(name)})
exten => _817NXXNXXXXXX,n,Dial(${XTRUNK}/1${EXTEN:3},,tTo)
exten => _817NXXNXXXXXX,n,Hangup

[callcentertech]

You should be better off without that line
exten => _817NXXNXXXXXX,n,Set(CALLERID(name)="Test Name") If remove this part call works perfect but with no custom name, just the caller id number and/or vicidial iud as name

I believe Xcast does not honour that input..

[iboam]

I want to eliminate the call uid as caller name. Any carrier that you recommend ???

[callcentertech]

Where do you see call uid appearing as Caller name. May be you can attach a screenshot from your switch..!!

I want to eliminate the call uid as caller name. Any carrier that you recommend ???

[iboam]

As a caller id on my phone VXXXXXXXXXXXXXXXXXXXXXX

[callcentertech]

Try this:
Set(CALLERID(name)=${CALLERID(num)})

[GenXOutsourcing]

I want to eliminate the call uid as caller name. Any carrier that you recommend ???

Tiltx can remove the Vicidial UID.

support@tiltx.com

[mflorell]

You can also do this with OpenSIPs on your own fairly easily.