vicidial.org

by **ruben23** » Thu Nov 20, 2008 3:49 pm

hi is it possible to setup vici+asterisk server with 2 ethernet ports eth0=external ip & eth1=internal ip and how would it be working with client PC.....

by **mflorell** » Thu Nov 20, 2008 4:16 pm

I have seen that done many times, are you having problems with that?

by **ruben23** » Thu Nov 20, 2008 4:49 pm

actually im planning to setup like that., my current setup is asterisk multi server with 1 Database and 1 asterisk behind NAT-what i intend to is to pullout asterisk server from NAT and connect directly to WAN to avoid SIP/NAT connection issues. what would be the configuration change on my asterisk server....? where my asterisk will be having 2 ethernet port. please some ideas..

by **mflorell** » Thu Nov 20, 2008 5:08 pm

Should not be any different than any other server, just make sure you use the internal IP address for your VICIDIAL server_ip settings.

by **ruben23** » Thu Nov 20, 2008 5:16 pm

how about my database server connecting to my asterisk server remotely...what i min is my asterisk DB have internal ip & my asterisk server is external ip..no physical connection on both.

by **gerski** » Thu Nov 20, 2008 5:30 pm

much better if you put them both on 1 network, then put public ip on eth1 and eth0 private ip to connect both asterisk and database.

vicidial.org

Vici+Asterisk with 2 ethernet ports

Vici+Asterisk with 2 ethernet ports

Who is online