vicidial.org

Hi guys,

I've configured and working the multiserver configuration, but now, I've a problem with the hopper, the agents log in to vicidial, but no leads are on the hopper.

If I ran the script /home/cron/AST_VDhopper.pl -q , the leads are added to the hopper, but 5 seconds later , the hopper is empty again without sending calls (I'm using manual calls, the autodialer is off).

this is the output of/home/cron/AST_VDhopper.pl --debugX

-----DEBUG -----

TIME DEBUG: -5|-4|1| GMT: 05:35
CALLBACK HOLD: 0|SELECT count(*) FROM vicidial_callbacks where callback_time <= '2006-07-28 1:35:09' and status='ACTIVE' and recipient='ANYONE';|
Starting hopper run for test campaign: GMT: 24hours '13.00','12.75','12.50','12.25','12.00','11.75','11.50','11.25','11.00','10.75','10.50','10.25','10.00','9.75','9.50','9.25','9.00','8.75','8.50','8.25','8.00','7.75','7.50','7.25','7.00','6.75','6.50','6.25','6.00','5.75','5.50','5.25','5.00','4.75','4.50','4.25','4.00','3.75','3.50','3.25','3.00','2.75','2.50','2.25','2.00','1.75','1.50','1.25','1.00','0.75','0.50','0.25','0.00','-0.25','-0.50','-0.75','-1.00','-1.25','-1.50','-1.75','-2.00','-2.25','-2.50','-2.75','-3.00','-3.25','-3.50','-3.75','-4.00','-4.25','-4.50','-4.75','-5.00','-5.25','-5.50','-5.75','-6.00','-6.25','-6.50','-6.75','-7.00','-7.25','-7.50','-7.75','-8.00','-8.25','-8.50','-8.75','-9.00','-9.25','-9.50','-9.75','-10.00','-10.25','-10.50','-10.75','-11.00','-11.25','-11.50','-11.75','-12.00','-12.25','-12.50','-12.75','99' HOPPER: 100
hopper DONE cleared: 0
hopper GMT BAD cleared: 0
hopper READY count: 0
hopper too low (0|100) starting hopper dump
campaign lists count: 1 | '199'
leads to call count: 16
ERROR CANNOT ADD ANY NEW LEADS TO HOPPER
Getting Leads to add to hopper
lead call order: order by lead_id asc
Adding to hopper: 16
DONE with this campaign
Starting hopper run for STD campaign: GMT: 24hours '13.00','12.75','12.50','12.25','12.00','11.75','11.50','11.25','11.00','10.75','10.50','10.25','10.00','9.75','9.50','9.25','9.00','8.75','8.50','8.25','8.00','7.75','7.50','7.25','7.00','6.75','6.50','6.25','6.00','5.75','5.50','5.25','5.00','4.75','4.50','4.25','4.00','3.75','3.50','3.25','3.00','2.75','2.50','2.25','2.00','1.75','1.50','1.25','1.00','0.75','0.50','0.25','0.00','-0.25','-0.50','-0.75','-1.00','-1.25','-1.50','-1.75','-2.00','-2.25','-2.50','-2.75','-3.00','-3.25','-3.50','-3.75','-4.00','-4.25','-4.50','-4.75','-5.00','-5.25','-5.50','-5.75','-6.00','-6.25','-6.50','-6.75','-7.00','-7.25','-7.50','-7.75','-8.00','-8.25','-8.50','-8.75','-9.00','-9.25','-9.50','-9.75','-10.00','-10.25','-10.50','-10.75','-11.00','-11.25','-11.50','-11.75','-12.00','-12.25','-12.50','-12.75','99' HOPPER: 100
hopper DONE cleared: 0
hopper GMT BAD cleared: 0
hopper READY count: 0
hopper too low (0|100) starting hopper dump
campaign lists count: 0 |
ERROR CANNOT ADD ANY NEW LEADS TO HOPPER
ERROR CANNOT ADD ANY LEADS TO HOPPER
DONE... Exiting... Goodbye... See you later... Really, I mean it

Thank you.

ERROR CANNOT ADD ANY NEW LEADS TO HOPPER
ERROR CANNOT ADD ANY LEADS TO HOPPER

That right there tells you that no leads were added to the hopper..

Confirm that your list has dialable leads and that its active and assigned to the campaign you want..

-enjay

Thank you for your answer enjay,

Yes, I've active lists with dialabe numbers (these lists were working on the single-server configuration).

mysql> select * from vicidial_lists;
+---------+--------------+-------------+--------+
| list_id | list_name | campaign_id | active |
+---------+--------------+-------------+--------+
| 102 | MONTERREY 1 | test | N |
| 103 | SANTANDER 01 | STD | Y |
| 198 | 198 | test | N |
| 199 | 199 | test | Y |
+---------+--------------+-------------+--------+
4 rows in set (0.00 sec)

mysql> select lead_id,phone_number from vicidial_list where list_id=199;
+---------+--------------+
| lead_id | phone_number |
+---------+--------------+
| 131853 | 8111558180 |
| 131854 | 8111558179 |
| 131855 | 8111558180 |
| 131856 | 8111558179 |
| 131857 | 8111558180 |
| 131858 | 8111558179 |
| 131859 | 8111558180 |
| 131860 | 8111558180 |
| 131861 | 8111558180 |
| 131862 | 8111558180 |
| 131863 | 8111558180 |
| 131864 | 8111558180 |
| 131865 | 8111558180 |
| 131866 | 8111558180 |
| 131867 | 8111558180 |
| 131868 | 8111558180 |
| 131869 | 8111558180 |
| 131870 | 8111558180 |
| 131871 | 8111558180 |
| 131872 | 8111558180 |
| 131873 | 8111558180 |
+---------+--------------+
21 rows in set (0.00 sec)

There is important the GMT or lead dates parameters?

REgards,

Check the list from the vicidial/admin.php interface..


ensure there are DIALABLE leads.. make sure your NEW's have not been called and that they are in NOT CALLED.

If they are in CALLED reset the list dispositions..

Both lists have leads on NOT CALLED status.
The hopper perl script detects 16 leads on my 199 test list, and add these lead to the hopper, but, I said before, the leads are deleted within 5 seconds from the hopper table.

campaign lists count: 1 | '199'
leads to call count: 16
ERROR CANNOT ADD ANY NEW LEADS TO HOPPER
Getting Leads to add to hopper
lead call order: order by lead_id asc
Adding to hopper: 16

STATUSES WITHIN THIS LIST:

STATUS CALLED NOT CALLED
N 5
NEW 16

regards,

Is just an idea, are the leads GTM setup correctly?

Did you run the scrip ADMIN_adjust_GMTnow_on_leads.pl ?

good look

Hi, thank you for your answer.
I ran the GMT script, but the problem is still happening.

This is the output of the GMT command:

STARTING TIME ZONE DAYLIGHT SAVING TIME CALCULATION SCRIPT

SEED TIME 1154113844 : 2006-07-28 14:10:44 LOCAL GMT OFFSET NOW: -4
- Unique Country dial codes found: 1

RUNNING LOOP FOR COUNTRY CODE:

DONE

Can you see if those 16 leads are being dialed?

What is the output of the ASTVDauto screen?

There are not dialed, because I've the autodialer off.

Other Idea?

thanks.

You say that the 16 leads are deleted within 5 seconds of insertion into the hopper. If you AST_VDauto_dial.pl script is not running do you have any idea how they are being removed?

hi matt
i was using 125.22.242.191 ip before but i chnaged to different ip now..i cahnged the new ip in all places..i have vicidial admin as well as vicidial user page but i couldnt find any lead in the hopper



/home/cron/AST_VDhopper.pl --debugX

----- DEBUG -----


----- SUPER DEBUG -----

Couldn't connect to 125.22.242.191:3306/tcp: IO::Socket::INET: connect: Connection refused at /home/cron/AST_VDhopper.pl line 141

did you change the DB server IP address in the astguiclient.conf file?

yep i changed the dbserver ipaddress in /etc/astguiclient.conf

hi matt
i couldnt see leads even after cahnging the dbserver ip

this is the ouput of debug command
[root@localhost cron]# /home/cron/AST_VDhopper.pl --debugX

----- DEBUG -----


----- SUPER DEBUG -----

TIME DEBUG: -5|-5|0| GMT: 23:05
SELECT * FROM vicidial_lists where active='N';Inactive Lists: 0
CALLBACK HOLD: 0|SELECT count(*) FROM vicidial_callbacks where callback_time <= '2006-10-11 18:05:04' and status='ACTIVE';|

|GMT-DAY-HOUR| |13.00-4-1205||12.75-4-1150||12.50-4-1135||12.25-4-1120||12.00-4-1105||11.75-4-1050||11.50-4-1035||11.25-4-1020||11.00-4-1005||10.75-4-950||10.50-4-935||10.25-4-920||10.00-4-905||9.75-4-850||9.50-4-835||9.25-4-820||9.00-4-805||8.75-4-750||8.50-4-735||8.25-4-720||8.00-4-705||7.75-4-650||7.50-4-635||7.25-4-620||7.00-4-605||6.75-4-550||6.50-4-535||6.25-4-520||6.00-4-505||5.75-4-450||5.50-4-435||5.25-4-420||5.00-4-405||4.75-4-350||4.50-4-335||4.25-4-320||4.00-4-305||3.75-4-250||3.50-4-235||3.25-4-220||3.00-4-205||2.75-4-150||2.50-4-135||2.25-4-120||2.00-4-105||1.75-4-50||1.50-4-35||1.25-4-20||1.00-4-5||0.75-3-2350||0.50-3-2335||0.25-3-2320||0.00-3-2305||-0.25-3-2250||-0.50-3-2235||-0.75-3-2220||-1.00-3-2205||-1.25-3-2150||-1.50-3-2135||-1.75-3-2120||-2.00-3-2105||-2.25-3-2050||-2.50-3-2035||-2.75-3-2020||-3.00-3-2005||-3.25-3-1950||-3.50-3-1935||-3.75-3-1920||-4.00-3-1905||-4.25-3-1850||-4.50-3-1835||-4.75-3-1820||-5.00-3-1805||-5.25-3-1750||-5.50-3-1735||-5.75-3-1720||-6.00-3-1705||-6.25-3-1650||-6.50-3-1635||-6.75-3-1620||-7.00-3-1605||-7.25-3-1550||-7.50-3-1535||-7.75-3-1520||-8.00-3-1505||-8.25-3-1450||-8.50-3-1435||-8.75-3-1420||-9.00-3-1405||-9.25-3-1350||-9.50-3-1335||-9.75-3-1320||-10.00-3-1305||-10.25-3-1250||-10.50-3-1235||-10.75-3-1220||-11.00-3-1205||-11.25-3-1150||-11.50-3-1135||-11.75-3-1120||-12.00-3-1105||-12.25-3-1050||-12.50-3-1035||-12.75-3-1020|
|SELECT * FROM vicidial_call_times where call_time_id='9am-9pm';|
Starting hopper run for TESTCAMP campaign- GMT: 9am-9pm HOPPER: 5
hopper DONE cleared: 0
|DELETE from vicidial_hopper where campaign_id='TESTCAMP' and status IN('DONE');|
hopper GMT BAD cleared: 0
|DELETE from vicidial_hopper where campaign_id='TESTCAMP' and ((gmt_offset_now IN('9.75','9.50','9.25','9.00','8.75','8.50','8.25','8.00','7.75','7.50','7.25','7.00','6.75','6.50','6.25','6.00','5.75','5.50','5.25','5.00','4.75','4.50','4.25','4.00','3.75','3.50','3.25','3.00','2.75','2.50','2.25','2.00','1.75','1.50','1.25','1.00','0.75','0.50','0.25','0.00','-0.25','-0.50','-0.75','-1.00','-1.25','-1.50','-1.75','-2.00','99') ) );|
hopper READY count: 0
|SELECT count(*) from vicidial_hopper where campaign_id='TESTCAMP' and status='READY';|
hopper too low (0|5) starting hopper dump
campaign lists count: 1 | '110'
|SELECT list_id FROM vicidial_lists where campaign_id='TESTCAMP' and active='Y';|
no lead filter defined for campaign: TESTCAMP
||
|SELECT count(*) FROM vicidial_list where called_since_last_reset='N' and status IN('NEW','','','','') and list_id IN('110') and ((gmt_offset_now IN('13.00','12.75','12.50','12.25','12.00','11.75','11.50','11.25','11.00','10.75','10.50','10.25','10.00','-2.25','-2.50','-2.75','-3.00','-3.25','-3.50','-3.75','-4.00','-4.25','-4.50','-4.75','-5.00','-5.25','-5.50','-5.75','-6.00','-6.25','-6.50','-6.75','-7.00','-7.25','-7.50','-7.75','-8.00','-8.25','-8.50','-8.75','-9.00','-9.25','-9.50','-9.75','-10.00','-10.25','-10.50','-10.75','-11.00','-11.25','-11.50','-11.75','-12.00','-12.25','-12.50','-12.75','99') ) ) ;|
leads to call count: 0
|SELECT count(*) FROM vicidial_list where called_since_last_reset='N' and status IN('NEW','','','','') and list_id IN('110') and ((gmt_offset_now IN('13.00','12.75','12.50','12.25','12.00','11.75','11.50','11.25','11.00','10.75','10.50','10.25','10.00','-2.25','-2.50','-2.75','-3.00','-3.25','-3.50','-3.75','-4.00','-4.25','-4.50','-4.75','-5.00','-5.25','-5.50','-5.75','-6.00','-6.25','-6.50','-6.75','-7.00','-7.25','-7.50','-7.75','-8.00','-8.25','-8.50','-8.75','-9.00','-9.25','-9.50','-9.75','-10.00','-10.25','-10.50','-10.75','-11.00','-11.25','-11.50','-11.75','-12.00','-12.25','-12.50','-12.75','99') ) ) ;|
ERROR CANNOT ADD ANY NEW LEADS TO HOPPER
ERROR CANNOT ADD ANY LEADS TO HOPPER
DONE... Exiting... Goodbye... See you later... Really, I mean it

when in run GMT
i am getting the following line
[root@localhost cron]# /home/cron/ADMIN_adjust_GMTnow_on_leads.pl
no command line options set
thanks