Set Priority for more than one Outbound Carriers

[tqdpro]

Is there a way to set Priority for more than one Outbound Carriers in Vicidial so that if the Priority 1 carrier is down, the Priority 2 will be used automatically? If yes, what are the settings to accomplish this? The following is our system information:

VERSION: 2.4-338a BUILD: 110923-2043| Asterisk 1.4.27.1-vici | ViciBox_Redux.i686-2.0.0 | OpenSuSE v.11.1 32-Bit | Kernel 2.6.27.45 w/PAE

The following is our working and outbound carrier settings:

Carrier ID: Outbound
Carrier Name: Testing1
Carrier Description:
Registration String:
Template ID: --NONE--
Account Entry: [siptest1]
host=x.x.x.x
insecure=very
type=peer
qualify=no
dtmfmode=rfc2833
canreinvite=no
disallow=all
allow=ulaw
allow=alaw
allow=gsm
port=5060
Protocol: SIP
Globals String:
Dialplan Entry:
exten => _1NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _1NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@siptest1)
exten => _1NXXNXXXXXX,3,Hangup

Server IP: x.x.x.x
Active: Y

Please help!

Thanks,
TD

[williamconley]

1) Thanks for posting your specs! I love when that happens.

2) Trunk / Dialout Failover is an asterisk function that is well-documented in many places. Including a few times on this forum. Just be sure that the "dial" command switches are maintained which you seem to have omitted in your example dialplan.

[tqdpro]

Thanks, William! I will check out those documents.