New Hardware poweredge R720

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

New Hardware poweredge R720

Postby alo » Sun Jun 09, 2013 2:59 pm

Good Morning All!

I have been adding agents to my current setup, and its time to order new hardware.
I am currently using desktop computers and have a few offices each on their own vicibox install. I want to combine them now.

This will be about 150 agents dialing pretty aggressively (dial rate up to 6 at times). I plan on having a few asterisk dialing servers in the configuration, but I am concerned about the main server database. Specifically the Raid and Hard drive config.

I plan to use the newest vicibox (4.0.3 64bit) and was looking for any thoughts on the hardware config below before I buy it.
I would be EXTREMELY Appreciative to anybody taking the time to offer their opinion.

I really Appreciate everything everybody does for the community here. Thank you

Dell PowerEdge R720
Processor:
2x Intel® Xeon® E5-2640 2.50GHz, 15M Cache, 7.2GT/s QPI, Turbo, 6C, 95W, Max Mem 1333MHz

Ram
2x 8GB RDIMM, 1333 MT/s, Low Volt, Dual Rank, x4 Data Width

RAID Controller:
PERC H310 Integrated RAID Controller

Hard Drives:
200GB Solid State Drive SAS Value SLC 6Gbps 2.5in Hot-plug Drive

Network Adapter:
Broadcom 5720 QP 1Gb Network Daughter Card

Power Supply:
Dual, Hot-plug, Redundant Power Supply (1+1), 495W
alo
 
Posts: 197
Joined: Wed Jun 20, 2012 10:21 am

Re: New Hardware poweredge R720

Postby alo » Sat Jun 15, 2013 12:58 am

Anyone Have any idea if it would be better to have a Raid 10 config with 100GB Solid State Drive SATA Value MLC 3Gbps 2.5in drives or a no raid config with a 200GB Solid State Drive SAS Value SLC 6Gbps 2.5in Hot-plug Drive?
alo
 
Posts: 197
Joined: Wed Jun 20, 2012 10:21 am

Re: New Hardware poweredge R720

Postby DomeDan » Mon Jun 17, 2013 4:37 am

I'm not very familiar to big setups, but are you thinking about running all 150 agents on one server serving DB/web/asterisk?
That will not work of what I've heard because asterisk don't scale well, look up similar topics regarding setups and read the comments from the experts.

I would use raid on the database server because of the redundancy, look up carefully if the raid controller is supported using OpenSuSE
Vicidial Partner. Region: Sweden/Norway.
Does Vicidial installation, configuration, customization, add-ons, CRM implementation, support, upgrading, network-related, pentesting etc. Remote and onsite assistance.
Email: domedan (at) gmail.com
DomeDan
 
Posts: 1226
Joined: Tue Jan 04, 2011 9:17 am
Location: Sweden

Re: New Hardware poweredge R720

Postby alo » Mon Sep 09, 2013 11:47 am

I choose the Raid 10 Config with the SSD. Its been working great.
alo
 
Posts: 197
Joined: Wed Jun 20, 2012 10:21 am

Re: New Hardware poweredge R720

Postby Vince-0 » Tue Sep 10, 2013 5:08 am

RAID 10 on SSD is over-kill for 150 agents, SAS drives will do just fine.
Vince-0
 
Posts: 272
Joined: Fri Mar 02, 2012 4:27 pm
Location: South Africa

Re: New Hardware poweredge R720

Postby gardo » Tue Sep 10, 2013 11:59 pm

If money is of no consequence, go for SSDs. They are far superior in performance and reliability over traditional harddrives (even the SAS drives on RAID10). Though RAID 10 is overkill. RAID 1 should be sufficient for SSDs. Unless you're really doing a lot of disk writes and you really like overkill setups (I like overkill with SSDs. Hehehe!). :)
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004


Return to Support

Who is online

Users browsing this forum: Bing [Bot] and 139 guests