vicidial.org

Please help. first time installed vicibox server and I can't get it to make a call out.
viciboxserver (vicidial) asterisk ver.1.4.44-vici

-----account entry-------
[GoTelefon]
disallow=all
allow=g729
allow=alaw
allow=ulaw
type=friend
username=1XXX
secret=afXXXXX
host=176.31.XXX.XXX
dtmfmode=rfc2833
context=default
---------dialplan entry-------------
exten =>_9XXXXXXXXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten =>_9XXXXXXXXXXXXXXXX,2,Dial(${GoTelefon}/${EXTEN:1},,To)
exten =>_9XXXXXXXXXXXXXXXX,3,Hangup
------------------------
global string i left empty
------------------------
_________________
Screw*CLI> sip show peers
Name/username Host Dyn Nat ACL Port Status
009/009 192.168.1.66 D N 44794 OK (8 ms)
GoTelefon/3*** 176.31.xxx.xx N 5060 OK (70 ms)
2 sip peers [Monitored: 2 online, 0 offline Unmonitored: 0 online, 0 offline]
__________________________
ERROR from CLI:
[Aug 1 14:05:43] -- Executing [8600051@default:1] MeetMe("Local/8600051@default-cc2e,2", "8600051|F") in new stack
[Aug 1 14:05:43] > Channel Local/8600051@default-cc2e,1 was answered.
[Aug 1 14:05:43] == Starting Local/8600051@default-cc2e,1 at default,004930824991xx,1 failed so falling back to exten 's'
[Aug 1 14:05:43] == Starting Local/8600051@default-cc2e,1 at default,s,1 still failed so falling back to context 'default'
[Aug 1 14:05:43] -- Sent into invalid extension 's' in context 'default' on Local/8600051@default-cc2e,1
[Aug 1 14:05:43] -- Executing [i@default:1] Playback("Local/8600051@default-cc2e,1", "invalid") in new stack
[Aug 1 14:05:43] -- <Local/8600051@default-cc2e,1> Playing 'invalid' (language 'en')
[Aug 1 14:05:43] WARNING[7594]: file.c:1297 waitstream_core: Unexpected control subclass '-1'
[Aug 1 14:05:43] WARNING[7594]: file.c:1297 waitstream_core: Unexpected control subclass '-1'
[Aug 1 14:05:45] == Manager 'sendcron' logged off from 127.0.0.1
[Aug 1 14:05:47] == Auto fallthrough, channel 'Local/8600051@default-cc2e,1' status is 'UNKNOWN'
[Aug 1 14:05:47] -- Executing [h@default:1] DeadAGI("Local/8600051@default-cc2e,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Aug 1 14:05:47] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Aug 1 14:05:47] == Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-cc2e,2'
[Aug 1 14:05:47] -- Executing [h@default:1] DeadAGI("Local/8600051@default-cc2e,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
[Aug 1 14:05:47] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0

1) Welcome to the Party!

2) As you are obviously new here, I have some suggestions to help us all help you:

When you post, please post your entire configuration including (but not limited to) your installation method and vicidial version with build.

This IS a requirement for posting along with reading the stickies (at the top of each forum) and the manager's manual (available on EFLO.net, both free and paid versions)

You should also post: Asterisk version, telephony hardware (model number is helpful here), cluster information if you have one, and whether any other software is installed in the box. If your installation method is "from scratch" you must post your operating system and should also post the .iso version from which you installed your original operating system. If your installation is "Hosted" list the site name of the host.

If this is a "Cloud" or "Virtual" server, please note the technology involved along with the version of that techology (ie: VMware Server Version 2.0.2). If it is not, merely stating the Motherboard model # and CPU would be helpful.

Similar to This:

Vicibox X.X from .iso | Vicidial X.X.X-XXX Build XXXXXX-XXXX | Asterisk X.X.X | Single Server | No Digium/Sangoma Hardware | No Extra Software After Installation | Intel DG35EC | Core2Quad Q6600

3) Your dialplan does not match the number you dialed:

_9XXXXXXXXXXXXXXXX does not match 004930824991xx