To many active calls and channels open - CPU goes to 100%
Posted: Tue May 27, 2014 9:15 am
Hi.
Once again I have this problem.
Server specs:
Processor: Intel Core-i5
RAM: 8 GB DDR3
Hard drives: 2 x 1 TB Seagate 7200 RPM SATA 3 (software RAID mirror using mdadm)
System: Vicibox 5.0.3
SVN Version: 2038
Asterisk: 1.8.23.1-vici
24 agents, RATIO set to 5, only outgoing calls.
Problem:
When agents start calling CPU utilization gets higher and higher. The Process that consumes CPU is: AST_update.pl It increase from 5% to 100% in about 5-6 hours.
Somethimes a got this error in asterisk -r : "WARNING[2626]: chan_sip.c:4214 __sip_autodestruct: Autodestruct on dialog 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx@xxxxxxxxxxxxxxxx' with owner SIP/xxxxxxxxxxxxxx in place (Method: BYE). Rescheduling destruction for 10000 ms"
When a check:
I got this result:
1003 active channels
3054 active calls
25625 calls processed
Also in web gui Admin/Servers/Modify/Live Channels there is 1003 live channels.
When this happens Load Average is: 3.81 4.15 4.45
Over time active channels and active calls are increasing.
When agents log out and there are "NO LIVE CALLS WAITING NO AGENTS ON CALLS" in real report i got this messages in asterisk -r:
Spawn extension (default, 9438435189, 2) exited non-zero on 'Local/9438435189@default-00004c47;2'
Only the number of telephone are getting changed.
In few minutes active channels and active calls are dropping to 0.
Can you help me with solution to this problem?
Once again I have this problem.
Server specs:
Processor: Intel Core-i5
RAM: 8 GB DDR3
Hard drives: 2 x 1 TB Seagate 7200 RPM SATA 3 (software RAID mirror using mdadm)
System: Vicibox 5.0.3
SVN Version: 2038
Asterisk: 1.8.23.1-vici
24 agents, RATIO set to 5, only outgoing calls.
Problem:
When agents start calling CPU utilization gets higher and higher. The Process that consumes CPU is: AST_update.pl It increase from 5% to 100% in about 5-6 hours.
Somethimes a got this error in asterisk -r : "WARNING[2626]: chan_sip.c:4214 __sip_autodestruct: Autodestruct on dialog 'xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx@xxxxxxxxxxxxxxxx' with owner SIP/xxxxxxxxxxxxxx in place (Method: BYE). Rescheduling destruction for 10000 ms"
When a check:
asterisk -rx "core show channels"
I got this result:
1003 active channels
3054 active calls
25625 calls processed
Also in web gui Admin/Servers/Modify/Live Channels there is 1003 live channels.
When this happens Load Average is: 3.81 4.15 4.45
Over time active channels and active calls are increasing.
When agents log out and there are "NO LIVE CALLS WAITING NO AGENTS ON CALLS" in real report i got this messages in asterisk -r:
Spawn extension (default, 9438435189, 2) exited non-zero on 'Local/9438435189@default-00004c47;2'
Only the number of telephone are getting changed.
In few minutes active channels and active calls are dropping to 0.
Can you help me with solution to this problem?