Sangoma UT50

[richardroi]

Hello Support,
I've been reading this topic http://www.vicidial.org/VICIDIALforum/viewtopic.php?f=8&t=31727#p111200,and it is not that clear,
I have 3 pcs of these hardware but according to sangoma "NOTE: DAHDI 2.6 and above is currently not supported. " It is confusing. On the forum "http://www.vicidial.org/VICIDIALforum/viewtopic.php?f=8&t=31727#p111200, he fixed the issue. Can someone confirmed? And do we have a much clearer steps on how to install ut50?

I remember when I first installed this on our old server I used these steps;
"I inserted UT50
ran modprobe wanpipe_voicetime
Edited Zap_Mod = wanpipe_voicetime
Then I ran all the sangoma trouble shooting steps on their website and all the results are ok..

cat /proc/dahdi/1
Span 1: WANVTIME/1 "WANVTIME/1 (source: wanpipe_voicetime) 1" (MASTER)

dahdi show status
Description Alarms IRQ bpviol CRC4
WANVTIME/1 (source: wanpipe_voicetime) UNCONFIGUR 0 0 0


dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.996% 99.998% 99.996% 99.999% 99.997% 99.997% 99.998% 99.997%
99.999% 99.999% 99.996% 99.998% 99.997% 99.999% 99.999% 99.995%
99.997% 99.998% 99.999% 99.998% 99.996% 99.996% 99.999% 99.999%
99.997% 99.996% 99.997% 99.999% 99.999% 99.999% 99.995% 99.997%
99.998% 99.998% 99.997% 99.992% 99.999% 99.999% 100.000% 99.996%
99.996% 99.997% 99.998% 99.999% 99.999% 99.996% 100.000% 99.998%
99.998% 99.998% 99.996% 99.997% 99.999% 99.999% 99.999% 99.995%
99.997% 99.999% 99.999% 99.997% 99.994% 99.998% 99.998% 99.999%
99.999% 99.995% 99.998% 99.998% 100.000% 99.999% 99.993% 99.998%
99.998% 99.999% 99.997% 99.997% 99.997% 99.999% 99.999% 99.999%
99.996% 99.999% 99.997% 100.000% 99.997% 99.996% 99.996% 99.998%
99.999% 99.998% 99.996% 99.998% 99.998% 100.000% 99.997% ^C
--- Results after 95 passes ---
Best: 100.000 -- Worst: 99.992 -- Average: 99.997625, Difference: 100.002038"
Don't know if this is correct! Do we really need ut50? Sangoma said it can correct bad line quality, but to my experience we still encountered line issues with ut50 installed.
Maybe my installation was wrong. Please help... I know there are some other things affecting line, but i want to try this first if it really helps.

Thank you.

[williamconley]

viewtopic.php?f=8&t=33134 ?

[richardroi]

Thank you William as always. How can I test if it is really working?
We plugged the UT50 first before installation.
During installation on our preload test server vicibox 6.0 beta it says " sangoma device detected" instaliing driver...
Does this mean the driver is installed or do i have to do http://www.vicidial.org/VICIDIALforum/viewtopic.php?f=8&t=33134 this?
When I do asterisk -r " it is saying unable to connect to remote asterisk"

Anyone? Kindly share...
Thank you.

[richardroi]

-bash: ./install-wanpipe: No such file or directory ---having this error,
when will I plugged the UT50?

[richardroi]

./install-wanpipe.sh
Retrieving repository 'Packman_13.1' metadata .................................................................................................................................................[done]
Building repository 'Packman_13.1' cache ......................................................................................................................................................[done]
Retrieving repository 'devel:languages:perl_13.1' metadata ---------------------------------------------------------------------------------------------------------------------------------------[/]
Download (curl) error for 'http://download.opensuse.org/repositories/devel:languages:perl/openSUSE_13.1/repodata/repomd.xml':
Error code: Connection failed
Error message: Failed to connect to 2001:67c:2178:8::13: Network is unreachable

something is not right?
Help!!!

[richardroi]

Abort, retry, ignore? [a/r/i/? shows all options] (a): i
Retrieving repository 'openSUSE_13.1_Updates' metadata .......................................................................................................................................[error]
Repository 'openSUSE_13.1_Updates' is invalid.
[|] Valid metadata not found at specified URL
Please check if the URIs defined for this repository are pointing to a valid repository.
Disabling repository 'openSUSE_13.1_Updates'.
Loading repository data...
Reading installed packages...
Resolving package dependencies...

Problem: nothing provides libteletone.so.0()(64bit) needed by wanpipe-7.0.10-0.x86_64
Solution 1: do not install wanpipe-7.0.10-0.x86_64
Solution 2: break wanpipe-7.0.10-0.x86_64 by ignoring some of its dependencies

Choose from above solutions by number or cancel [1/2/c] (c):

[richardroi]

You have to manually download the driver and install it using 'zypper in <files_here>' from the following url: http://download.vicidial.com/iso/vicibo ... /vicibox6/
According to KUMBA, I just don't know how to do this!!!

and what about this one?
1) cd /tmp
2) wget http://download.vicidial.com/iso/vicibo ... 6/wanpipe-<wanpipe-version>-k<kernel-version>.tar.bz2
- for example: wget http://download.vicidial.com/iso/vicibo ... 10.tar.bz2
3) tar -xf wanpipe-<wanpipe-version>-k<kernel-version>.tar.bz2
- for example: tar -xf wanpipe-7.0.10-k3.11.10.tar.bz2
4) type './install-wanpipe' and press ENTER
5) If it gives you no errors or complains about installing itself, then you are ready to go, and can type 'Y' to continue. If it complains, you need to figure out why.

[richardroi]

amfeltec system timer... supported out of the box on vicibox install!