vicidial.org

Server IP -This is the server that this specific carrier record is associated with.


when I look in Admin-> servers it shows the external IP address.

As I expect, update server shows the internal IP address for vicibox:

Code: Select all

tleilax:~ #
tleilax:~ # perl /usr/share/astguiclient/ADMIN_update_server_ip.pl
Previous astGUIclient configuration file found at: /etc/astguiclient.conf

Would you like to use interactive mode (y/n): [y] y

STARTING SERVER IP ADDRESS CHANGE FOR VICIDIAL...

Old server IP address or press enter for default: []

server IP address or press enter for default: [192.168.0.21]

  old server_ip:     
  new server_ip:      192.168.0.21

Are these settings correct?(y/n): [y]
Writing change to astguiclient.conf file: /etc/astguiclient.conf

STARTING DATABASE TABLES UPDATES PHASE...
  Updating servers table...
     |1|UPDATE servers SET server_ip='192.168.0.21' where server_ip='';|
  Updating phones table...
     |3|UPDATE phones SET server_ip='192.168.0.21' where server_ip='';|
  Updating inbound_numbers table...
     |0E0|UPDATE inbound_numbers SET server_ip='192.168.0.21' where server_ip='';|
  Updating server_updater table...
     |1|UPDATE server_updater SET server_ip='192.168.0.21' where server_ip='';|
  Updating conferences table...
     |49|UPDATE conferences SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_conferences table...
     |249|UPDATE vicidial_conferences SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_stations table...
     |0E0|UPDATE vicidial_stations SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_remote_agents table...
     |0E0|UPDATE vicidial_remote_agents SET server_ip='192.168.0.21' where server_ip='';|
  Updating phone_favorites table...
     |0E0|UPDATE phone_favorites SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_server_trunks table...
     |0E0|UPDATE vicidial_server_trunks SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_server_carriers table...
     |1|UPDATE vicidial_server_carriers SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_inbound_dids table...
     |1|UPDATE vicidial_inbound_dids SET server_ip='192.168.0.21' where server_ip='';|
  Updating vicidial_process_triggers table...
     |0E0|UPDATE vicidial_process_triggers SET server_ip='192.168.0.21' where server_ip='';|
  Setting servers to rebuild conf files...
     |1|UPDATE servers SET rebuild_conf_files='Y' where generate_vicidial_conf='Y' and active_asterisk_server='Y';|

SERVER IP ADDRESS CHANGE FOR VICIDIAL FINISHED!


     - process runtime      (11 sec) (0.183333333333333 minutes)
tleilax:~ #
tleilax:~ # perl /usr/share/astguiclient/ADMIN_keepalive_ALL.pl
tleilax:~ #


When I look at the servers (1), it shows correctly:

Code: Select all

SERVER LISTINGS:
SERVER ID   NAME   SERVER IP   ACTIVE   AGENT   ASTERISK   TRUNKS   GMT   MODIFY
linux-k7qk   Server linux-k7qk   192.168.0.21   Y   Y   1.8.29.0-vici   23   -5.00   MODIFY

Yet, when I go to add a carrier, it only shows the external IP address for the vicibox server. I believe this is the "source carrier"?

Selecting "copy a carrier" I note that Server IP is my internal ip address, as above. What's my Source Carrier and how do I enter it?

The fine manual, p13 uses Server IP: 10.10.10.15 (set this to your server ip) and I note that the sample string:

Registration String: register => newsip:test@10.10.10.15:5060


uses that same IP address.

Obviously, the connection is between the vicidial server's IP address and the IP address for the "trunking" carrier.


What do I want, and how do I enter, data for the server ip dropdown list?