vicidial.org

First i used Ztdummy as the timing device now i have formated and Put a zaptel card and installed it newly..But i am getting the following error when i typed asterisk -vvvvvvvvvvgc...

Apr 5 15:12:23 WARNING[17164]: chan_zap.c:921 zt_open: Unable to specify channel 1: No such device or address
Apr 5 15:12:23 ERROR[17164]: chan_zap.c:6880 mkintf: Unable to open channel 1: No such device or address
here = 0, tmp->channel = 1, channel = 1
Apr 5 15:12:23 ERROR[17164]: chan_zap.c:10308 setup_zap: Unable to register channel '1'
Apr 5 15:12:23 WARNING[17164]: loader.c:414 __load_resource: chan_zap.so: load_module failed, returning -1
Apr 5 15:12:23 WARNING[17164]: loader.c:554 load_modules: Loading module chan_zap.so failed!

this is my configuration of zaptel.conf

span=1,1,0,esf,b8zs
e&m=1-24
loadzone = us
defaultzone=us
fxsks=1

What card are you using?
Did you use lsmod command to load drivers?
Did you take care of udev?

Better informacion in http://www.voip-info.com, http://www.asteriskguru.com, [url]forums.digium.com[/url]

Thats not a VICIDIAL error. Try going to asterisk forum instead.

if you're using x100p try loading the module first.

modprobe zaptel
modprobe wcfxo (modprobe ztdummy - w/o a timer card)
ztcfg -vvvvvvvv

check w/c timer card you're using and load the necessary drivers. if you're not going to use the fxo port of the card you can put the noload option for chan_zap.so in your /etc/asterisk/modules.conf.

noload => chan_zap.so

I have loaded these modules still i am getting these errors...
pls help me to solve this issue....

the problem is your configuration on zaptel.conf and zapata.conf

what type of asterisk card is this? T1 or E1?