vicidial.org

Is there a trunkoutbound which corresponds to trunkinbound?

I looked in vicidial_server_carriers in the database, but couldn't find an entry for trunkinbound. I looked through sip-vicidial and extensions-vicidial.conf and couldn't find it there, either. However, it's the context for the outbound server, as:

Code: Select all

vici*CLI>
vici*CLI> sip show peer babytel_out


  * Name       : babytel_out
  Secret       : <Set>
  MD5Secret    : <Not set>
  Remote Secret: <Not set>
  Context      : trunkinbound
  Subscr.Cont. : <Not set>
  Language     : en
  AMA flags    : Unknown
  Netborder CPD: No
  Transfer mode: open
  CallingPres  : Presentation Allowed, Not Screened
  Callgroup    :
  Pickupgroup  :
  MOH Suggest  : default
  Mailbox      :
  VM Extension : asterisk
  LastMsgsSent : 32767/65535
  Call limit   : 0
  Max forwards : 0
  Dynamic      : No
  Callerid     : "" <>
  MaxCallBR    : 384 kbps
  Expire       : -1
  Insecure     : invite
  Force rport  : Yes
  ACL          : No
  DirectMedACL : No
  T.38 support : No
  T.38 EC mode : Unknown
  T.38 MaxDtgrm: 4294967295
  DirectMedia  : No
  PromiscRedir : No
  User=Phone   : No
  Video Support: No
  Text Support : No
  Ign SDP ver  : No
  Trust RPID   : No
  Send RPID    : Yes
  TrustIDOutbnd: Legacy
  Subscriptions: Yes
  Overlap dial : No
  Outb. proxy  : nat5.babytel.ca
  DTMFmode     : rfc2833
  Timer T1     : 500
  Timer B      : 32000
  ToHost       : nat5.babytel.net
  Addr->IP     : (null)
  Defaddr->IP  : (null)
  Prim.Transp. : UDP
  Allowed.Trsp : UDP
  Def. Username: 19876543210
  SIP Options  : (none)
  Codecs       : 0x6 (gsm|ulaw)
  Codec Order  : (ulaw:20,gsm:20)
  Auto-Framing : No
  Status       : UNKNOWN
  Useragent    :
  Reg. Contact :
  Qualify Freq : 60000 ms
  Sess-Timers  : Accept
  Sess-Refresh : uas
  Sess-Expires : 1800 secs
  Min-Sess     : 90 secs
  RTP Engine   : asterisk
  Parkinglot   :
  Use Reason   : No
  Encryption   : No

vici*CLI>


Where does that context originate? I cannot find a definition for it.

Code: Select all

; WARNING- THIS FILE IS AUTO-GENERATED BY VICIDIAL, ANY EDITS YOU MAKE WILL BE LOST
register => 19876543210@sip.babytel.ca:vndlfr5454fjdsklf:19876543210@nat5.babytel.ca:5065/19876543210

; VICIDIAL Carrier: BABYTEL - babytel
; Babytel
[babytel_in]
type=peer
qualify=no
host=nat5.babytel.ca
port=5065
context=inbound-calls

[babytel_out]
type=peer
username=19876543210
host=nat5.babytel.net
outboundproxy=nat5.babytel.ca:5065
secret=vndlfr5454fjdsklf
canreinvite=no
insecure=invite



[200]
username=200
secret=password
accountcode=200
callerid="" <200>
mailbox=200
context=default
type=friend
host=dynamic

[201]
username=201
secret=password
accountcode=201
callerid="" <201>
mailbox=201
context=default
type=friend
host=dynamic

[202]
username=202
secret=password
accountcode=202
callerid="" <202>
mailbox=202
context=default
type=friend
host=dynamic

[gs102]
username=gs102
secret=password
accountcode=gs102
callerid="Test Admin Phone" <>
mailbox=102
context=default
type=friend
host=dynamic


; END OF FILE    Last Forced System Reload: 2015-04-03 17:14:22


and extensions:

Code: Select all

; WARNING- THIS FILE IS AUTO-GENERATED BY VICIDIAL, ANY EDITS YOU MAKE WILL BE LOST
TRUNKloop = IAX2/ASTloop:password@127.0.0.1:40569
TRUNKblind = IAX2/ASTblind:password@127.0.0.1:41569
TRUNKplay = IAX2/ASTplay:password@127.0.0.1:42569
TESTSIPTRUNK = SIP/babytel_out



; agent phones restricted to only internal extensions
[default---agent]
exten => s,1,Answer
exten => s,n,AGI(agi-VDAD_inbound_calltime_check.agi,-----NO-----default---agent-------------------------NO)
exten => s,n,Set(INVCOUNT=0)
exten => s,n,Background(sip-silence)
exten => s,n,WaitExten(20)


; hangup
exten => t,1,Playback(vm-goodbye)
exten => t,n,Hangup()
exten => i,1,Goto(s,4)
exten => i,n,Hangup()
; hangup
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; custom dialplan entries
include => vicidial-auto-internal
include => vicidial-auto-phones




; logging of all outbound calls from agent phones
[defaultlog]
exten => s,1,Answer
exten => s,n,AGI(agi-VDAD_inbound_calltime_check.agi,-----NO-----defaultlog-------------------------NO)
exten => s,n,Set(INVCOUNT=0)
exten => s,n,Background(sip-silence)
exten => s,n,WaitExten(20)


; hangup
exten => t,1,Playback(vm-goodbye)
exten => t,n,Hangup()
exten => i,1,Goto(s,4)
exten => i,n,Hangup()
; hangup
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; custom dialplan entries
exten => _X.,1,AGI(agi-NVA_recording.agi,BOTH------Y---Y---Y)
exten => _X.,n,Goto(default,${EXTEN},1)




[vicidial-auto-external]
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Local Server: 192.168.0.19
exten => _192*168*000*019*.,1,Goto(default,${EXTEN:16},1)
exten => _192*168*000*019*.,2,Hangup()
exten => _**192*168*000*019*.,1,Goto(default,${EXTEN:18},1)
exten => _**192*168*000*019*.,2,Hangup()

; Agent session audio playback meetme entry
exten => _473782178600XXX,1,Meetme(${EXTEN:8},q)
exten => _473782178600XXX,n,Hangup()
; Agent session audio playback loop
exten => _473782168600XXX,1,Dial(${TRUNKplay}/47378217${EXTEN:8},5,To)
exten => _473782168600XXX,n,Hangup()
; Agent session audio playback extension
exten => 473782158521111,1,Answer
exten => 473782158521111,n,ControlPlayback(${CALLERID(name)},99999,0,1,2,3,4)
exten => 473782158521111,n,Hangup()
; SendDTMF to playback channel to control it
exten => _473782148521111.,1,Answer
exten => _473782148521111.,n,SendDTMF(${CALLERID(num)},250,250,IAX2/ASTplay-${EXTEN:15})
exten => _473782148521111.,n,Hangup()
; Silent wait channel for DTMFsend
exten => 473782138521111,1,Answer
exten => 473782138521111,n,Wait(5)
exten => 473782138521111,n,Hangup()
; VICIDIAL Carrier: BABYTEL - babytel
; Babytel
[general]

[inbound-calls]
 exten => 19876543210,1,Dial(SIP/200)

[local_200]
exten => _9x.,1,Set(CALLERID(all)="Ali Baba" <9876543210>)
exten => _9x.,1,Dial(SIP/${EXTEN:1}@babytel_out)
exten => 201,1,Dial(SIP/201)

[local_201]
exten => 200,1,Dial(SIP/200)

[vicidial-auto-internal]
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})
; Voicemail Extensions:
exten => _85026666666666.,1,Wait(1)
exten => _85026666666666.,n,Voicemail(${EXTEN:14},u)
exten => _85026666666666.,n,Hangup()
exten => _85026666666667.,1,Wait(1)
exten => _85026666666667.,n,Voicemail(${EXTEN:14},su)
exten => _85026666666667.,n,Hangup()
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)
exten => 8500,3,Hangup()
exten => 8501,1,VoicemailMain(s${CALLERID(num)})
exten => 8501,2,Hangup()

; Prompt Extensions:
exten => 8167,1,Answer
exten => 8167,2,AGI(agi-record_prompts.agi,wav-----720000)
exten => 8167,3,Hangup()
exten => 8168,1,Answer
exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----720000)
exten => 8168,3,Hangup()

; this is used for recording conference calls, the client app sends the filename
;    value as a callerID recordings go to /var/spool/asterisk/monitor (WAV)
;    Recording is limited to 1 hour, to make longer, just change the server
;    setting ViciDial Recording Limit
;     this is the WAV verison, default
exten => 8309,1,Answer
exten => 8309,2,Monitor(wav,${CALLERID(name)})
exten => 8309,3,Wait(3600)
exten => 8309,4,Hangup()
;     this is the GSM verison
exten => 8310,1,Answer
exten => 8310,2,Monitor(gsm,${CALLERID(name)})
exten => 8310,3,Wait(3600)
exten => 8310,4,Hangup()

;     agent alert extension
exten => 83047777777777,1,Answer
exten => 83047777777777,2,Playback(${CALLERID(name)})
exten => 83047777777777,3,Hangup()
; This is a loopback dial-around to allow for immediate answer of outbound calls
exten => _8305888888888888.,1,Answer
exten => _8305888888888888.,n,Wait(${EXTEN:16:1})
exten => _8305888888888888.,n,Dial(${TRUNKloop}/${EXTEN:17},,To)
exten => _8305888888888888.,n,Hangup()
; No-call silence extension
exten => _8305888888888888X999,1,Answer
exten => _8305888888888888X999,n,Wait(3600)
exten => _8305888888888888X999,n,Hangup()

[vicidial-auto-phones]
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Phones direct dial extensions:
exten => 200,1,Dial(SIP/200,60,)
exten => 200,2,Goto(default,85026666666666200,1)
exten => 200,3,Hangup()
exten => 201,1,Dial(SIP/201,60,)
exten => 201,2,Goto(default,85026666666666201,1)
exten => 201,3,Hangup()
exten => 202,1,Dial(SIP/202,60,)
exten => 202,2,Goto(default,85026666666666202,1)
exten => 202,3,Hangup()
exten => 102,1,Dial(SIP/gs102,60,)
exten => 102,2,Goto(default,85026666666666102,1)
exten => 102,3,Hangup()

[vicidial-auto]
exten => h,1,AGI(agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

include => vicidial-auto-internal
include => vicidial-auto-phones
include => vicidial-auto-external


; END OF FILE    Last Forced System Reload: 2015-04-03 17:14:22


Where else could this context come from? I can't see where or how it's defined. To my knowledge I've never entered it in the system.

Aha, I see that it's in the sip.conf as:

Code: Select all

vici:~ #
vici:~ # head /etc/asterisk/sip.conf
[general]
context=trunkinbound            ; Default context for incoming calls
allowguest=no                  ; Allow or reject guest calls (default is yes)
allowoverlap=no                 ; Disable overlap dialing support. (Default is yes)
;allowtransfer=no               ; Disable all transfers (unless enabled in peers or users)
;realm=mydomain.tld             ; Realm for digest authentication
bindport=5060                   ; UDP Port to bind to (SIP standard port is 5060)
bindaddr=0.0.0.0                ; IP address to bind to (0.0.0.0 binds to all)
srvlookup=yes                   ; Enable DNS SRV lookups on outbound calls
;domain=mydomain.tld            ; Set default domain for this host
vici:~ #


What you're looking at is the example setup in the admin page. If you go to Admin --> Carriers you'll see the entries as they appear in extensions-vicidial.conf. You can either edit the example or just deactivate it and create a new one. A sample dialplan context called trunkoutbound is located in /etc/asterisk/extensions.conf but is commented out. It is meant to be copied into the Admin --> Carrier page where you can adjust it for the specific carrier entry.

I'm assuming that like me you started with Asterisk before doing Vicidial, as I was wondering many of the same questions at first. You'll notice most of the usual default Asterisk conf files, like sip.conf and extensions.conf, have a #include for sip-vicidial.conf or extensions-vicidial.conf. Those #included files are all generated based on what you put in the Admin interface by the admin perl scripts. A vaste majority of Vicidial functions can be used without ever touching the asterisk conf files, always look in the admin interface before you commit to editing the back end directly.