What is the acceptable value on MTR regarding Packets loss percentage? Does it have to be 0% all time? What % could affect line quality?
Thank you.
MTR
Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N
4 posts
• Page 1 of 1
MTR
by richardroi » Wed Jun 10, 2015 6:34 am
ViciBox v.5.0.2-130807 | BUILD: 130809-1410 | SVN Version: 2019 | Asterisk: 1.8.23-vici
64bit Single Server/ ISO Preload Install
Inbound/Blended
64bit Single Server/ ISO Preload Install
Inbound/Blended
- richardroi
- Posts: 373
- Joined: Mon Mar 21, 2011 7:20 pm
Re: MTR
by jkidd » Wed Jun 10, 2015 9:47 pm
In my experience and sort of packet loss will effect call quality. Anything about 10% is way too much for us. Generally it's 0% all the time and only a Telco network issue will cause packet loss
VERSION: 2.14-697a | BUILD: 190121-2019 Asterisk Version 13.21.1-vici | cluster 1 DB 4 web / diallers
- jkidd
- Posts: 85
- Joined: Wed Apr 23, 2014 9:38 am
Re: MTR
by mflorell » Thu Jun 11, 2015 6:30 am
It also depends on the audio codec you are using. If you are using G729a, then any packet loss at all makes for audio problems. While G711 or GSM are more forgiving of packet loss.
- mflorell
- Site Admin
- Posts: 18387
- Joined: Wed Jun 07, 2006 2:45 pm
- Location: Florida
Re: MTR
by richardroi » Thu Jun 11, 2015 2:44 pm
Thank you for the info!
ViciBox v.5.0.2-130807 | BUILD: 130809-1410 | SVN Version: 2019 | Asterisk: 1.8.23-vici
64bit Single Server/ ISO Preload Install
Inbound/Blended
64bit Single Server/ ISO Preload Install
Inbound/Blended
- richardroi
- Posts: 373
- Joined: Mon Mar 21, 2011 7:20 pm
4 posts
• Page 1 of 1
Who is online
Users browsing this forum: No registered users and 110 guests