vicidial.org

Hi,

I need your help on what's the correct configuration that I need to use so I can do an outbound call? Here's my current setup including the version of my ViciDial server:

Registration String:
register => 112233445566:12345567899@111.222.333.444:6789/112233445566

Account Entry:
[cts]
username=123456778899
type=friend
secret=123345677899
qualify=yes
port=6789
nat=force_rport
host=111.222.333.444
dtmfmode=rfc2833
disallow=all
context=trunkinbound
canreinvite=yes
allow=gsm
allow=ulaw
allow=alaw
allow=g729
allow=ilbc

Globals String: SIPTRUNK = SIP/cts

exten => _71NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _7XXXXXXXXXXXXXX,2,Dial(${SIPTRUNK}/${EXTEN:1}@cts,,To)
exten => _7NXXNXXXXXX,3,Hangup

VERSION: 2.14-732a
BUILD: 200108-0937

The carrier successfully registered. However, when I tried to perform an outbound calls, the Asterisk logs always shows below and the calls didn't go thru:
chan_sip.c:26515 handle_request_invite: Call from '132' (123.123.123.123:65476) to extension '7861064648855' rejected because extension not found in context 'default'.

I need to use number 7 as my Prefix. I followed this guide (https://www.etollfree.net/predictive-di ... -dids.html) to configure my ViciDial.

Hope you can help me. Thank you in advance!

Pattern doesn't match, removing the prefix it is an 11 digit pattern and number have 12 digits

Number Dialed: 7861064648855

Dialplan:

Code: Select all

exten => _71NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _7XXXXXXXXXXXXXX,2,Dial(${SIPTRUNK}/${EXTEN:1}@cts,,To)
exten => _7NXXNXXXXXX,3,Hangup

Multiple problems:
First, the dialplan is three different extension patterns and are as such unrelated to one another.
_71NXXNXXXXXX,_7XXXXXXXXXXXXXX,_7NXXNXXXXXX must be identical to be a diaplan entry, and they are obviously not.
This means that these are actually three different dialplans, and only one of them has a ",1," priority. The other two will be ignored. Dialplans without a 1 priority have no starting point.

Second, none of these three patterns actually match the number dialed. So "extension not found" is a valid and expected response.

Code: Select all

exten => _7XXXXXXXXX.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _7XXXXXXXXX.,2,Dial(${SIPTRUNK}/${EXTEN:1}@cts,,To)
exten => _7XXXXXXXXX.,3,Hangup

This will match all 10 or more digit numbers starting with a 7.