vicidial.org

the dialer is dialing out and transfering the call by running VDADtransfer.agi. but the screen is not displaying the informatin and the call gets drop


My setup are as follow

CentOS
Trixbox 2.2
FreePBX
Asterisk 1.2.18
Zaptel lastest build

Vicidial also the latest release
dialout using sip

Hi

check in * Cli, while transfering the call
and post the cli message here

ram

== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing AGI("Local/916096986286@vicidial-b5b2,2", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing Dial("Local/916096986286@vicidial-b5b2,2", "SIP/vitel-out/16096986286||tTo") in new stack
-- Called vitel-out/16096986286
-- SIP/vitel-out-09188600 is ringing
-- SIP/vitel-out-09188600 is making progress passing it to Local/916096986286@vicidial-b5b2,2
-- SIP/vitel-out-09188600 answered Local/916096986286@vicidial-b5b2,2
> Channel Local/916096986286@vicidial-b5b2,1 was answered.
== Manager 'sendcron' logged off from 127.0.0.1
-- Executing AGI("Local/916096986286@vicidial-b5b2,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing AGI("Local/916096986286@vicidial-b5b2,1", "agi-VDADtransfer.agi|8365") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
-- AGI Script agi-VDADtransfer.agi completed, returning 0
-- Executing AGI("Local/916096986286@vicidial-b5b2,1", "agi-VDADtransfer.agi|8365") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
-- AGI Script agi-VDADtransfer.agi completed, returning 0
-- Executing AGI("Local/916096986286@vicidial-b5b2,1", "agi-VDADtransfer.agi|8365") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDADtransfer.agi
-- AGI Script agi-VDADtransfer.agi completed, returning 0
-- Executing Hangup("Local/916096986286@vicidial-b5b2,1", "") in new stack
== Spawn extension (vicidial, 8365, 5) exited non-zero on 'Local/916096986286@vicidial-b5b2,1'
-- Executing DeadAGI("Local/916096986286@vicidial-b5b2,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing DeadAGI("Local/916096986286@vicidial-b5b2,1", "agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----16---------------)") in new stack
-- AGI Script agi://127.0.0.1:4577/VD_hangup--HVcause ... ----------) completed, returning 0
== Spawn extension (vicidial, 916096986286, 2) exited non-zero on 'Local/916096986286@vicidial-b5b2,2'
-- Executing DeadAGI("Local/916096986286@vicidial-b5b2,2", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing DeadAGI("Local/916096986286@vicidial-b5b2,2", "agi://127.0.0.1:4577/VD_hangup--HVcauses--PRI-----NODEBUG-----16-----ANSWER-----12-----0)") in new stack
-- AGI Script agi://127.0.0.1:4577/VD_hangup--HVcause ... --12-----0) completed, returning 0
== Parsing '/etc/asterisk/manager.conf': Found
== Parsing '/etc/asterisk/manager_custom.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1

i think you have included your dial prefix nine.. make sure your setting is:
"EXTEN:1" to disable the first number.