Vicibox11 - IAX Issue
Posted: Thu Sep 21, 2023 9:08 pm
We recently moved to Vicibox 11, apart from initial module load issues (which was fixed later) everything seems to be working well and also noticed AMDs also got better.
Our setup is; multiple standalone dialers with an Asterisk (FreePBX) server that handles the endpoint registration so there is a flexibility for users to jump into any dialer without changing endpoint SIP settings, however carrier settings are defined in the dialer; Asterisk connection is just for the SIP endpoints and nothing else. The dialers are connected using the IAX trunk with the Asterisk. It was all ok, till the time we moved to Vicibox 11 from Vicibox 10. No audio, not even the connection call "you are the only person.." or ring. Had to switch to SIP to interconnect Asterisk with Vicibox dialers - this works. Very strange, so was checking if anyone noticed similar issues. Had look at Asterisk 16 IAX issues and all, couldn't find anything; mostly refers to NAT but this even doesn't reach the router/firewall; it's within the LAN itself. The IAX that hadles audio sound board etc within the dialer works perfectly; not an issue there.
Account Entry:
Dialplan Entry:
Our setup is; multiple standalone dialers with an Asterisk (FreePBX) server that handles the endpoint registration so there is a flexibility for users to jump into any dialer without changing endpoint SIP settings, however carrier settings are defined in the dialer; Asterisk connection is just for the SIP endpoints and nothing else. The dialers are connected using the IAX trunk with the Asterisk. It was all ok, till the time we moved to Vicibox 11 from Vicibox 10. No audio, not even the connection call "you are the only person.." or ring. Had to switch to SIP to interconnect Asterisk with Vicibox dialers - this works. Very strange, so was checking if anyone noticed similar issues. Had look at Asterisk 16 IAX issues and all, couldn't find anything; mostly refers to NAT but this even doesn't reach the router/firewall; it's within the LAN itself. The IAX that hadles audio sound board etc within the dialer works perfectly; not an issue there.
Account Entry:
- Code: Select all
[Asterisk]
host=192.168.1.X
type=friend
username=1XXXX
fromuser=1XXXX
secret=XXXXXXXXXXXXXXXXXXXXXX
disallow=all
allow=alaw
allow=ulaw
allow=gsm
allow=g729
insecure=no
qualify=yes
dtmfmode=rfc2833
context=from-internal
Dialplan Entry:
- Code: Select all
exten => _1[01]XX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _1[01]XX,2,Dial(IAX2/Asterisk/${EXTEN},${CAMPDTO},tTkK)
exten => _1[01]XX,3,Hangup()