vicidial.org

Hi



I am hearing a choppy lines., especialy when im using vicidial? what could be the cuase of this problem.,?

Hi

what is the version of zaptel

what kind of timer source you are using

hardware or ztdummy ?

ram

hi ram


is this what your looking for?


Zaptel Configuration
======================

SPAN 1: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)
SPAN 2: ESF/B8ZS Build-out: 0 db (CSU)/0-133 feet (DSX-1)

Channel map:

Channel 01: FXO Kewlstart (Default) (Slaves: 01)
Channel 02: FXO Kewlstart (Default) (Slaves: 02)
Channel 03: FXO Kewlstart (Default) (Slaves: 03)
Channel 04: FXO Kewlstart (Default) (Slaves: 04)
Channel 05: FXO Kewlstart (Default) (Slaves: 05)
Channel 06: FXO Kewlstart (Default) (Slaves: 06)
Channel 07: FXO Kewlstart (Default) (Slaves: 07)
Channel 08: FXO Kewlstart (Default) (Slaves: 08)
Channel 09: FXO Kewlstart (Default) (Slaves: 09)
Channel 10: FXO Kewlstart (Default) (Slaves: 10)
Channel 11: FXO Kewlstart (Default) (Slaves: 11)
Channel 12: FXO Kewlstart (Default) (Slaves: 12)
Channel 13: FXO Kewlstart (Default) (Slaves: 13)
Channel 14: FXO Kewlstart (Default) (Slaves: 14)
Channel 15: FXO Kewlstart (Default) (Slaves: 15)
Channel 16: FXO Kewlstart (Default) (Slaves: 16)
Channel 17: FXO Kewlstart (Default) (Slaves: 17)
Channel 18: FXO Kewlstart (Default) (Slaves: 18)
Channel 19: FXO Kewlstart (Default) (Slaves: 19)
Channel 20: FXO Kewlstart (Default) (Slaves: 20)
Channel 21: FXO Kewlstart (Default) (Slaves: 21)
Channel 22: FXO Kewlstart (Default) (Slaves: 22)
Channel 23: FXO Kewlstart (Default) (Slaves: 23)
Channel 24: FXO Kewlstart (Default) (Slaves: 24)
Channel 25: FXO Kewlstart (Default) (Slaves: 25)
Channel 26: FXO Kewlstart (Default) (Slaves: 26)
Channel 27: FXO Kewlstart (Default) (Slaves: 27)
Channel 28: FXO Kewlstart (Default) (Slaves: 28)
Channel 29: FXO Kewlstart (Default) (Slaves: 29)
Channel 30: FXO Kewlstart (Default) (Slaves: 30)
Channel 31: FXO Kewlstart (Default) (Slaves: 31)
Channel 32: FXO Kewlstart (Default) (Slaves: 32)
Channel 33: FXO Kewlstart (Default) (Slaves: 33)
Channel 34: FXO Kewlstart (Default) (Slaves: 34)
Channel 35: FXO Kewlstart (Default) (Slaves: 35)
Channel 36: FXO Kewlstart (Default) (Slaves: 36)
Channel 37: FXO Kewlstart (Default) (Slaves: 37)
Channel 38: FXO Kewlstart (Default) (Slaves: 38)
Channel 39: FXO Kewlstart (Default) (Slaves: 39)
Channel 40: FXO Kewlstart (Default) (Slaves: 40)
Channel 41: FXO Kewlstart (Default) (Slaves: 41)
Channel 42: FXO Kewlstart (Default) (Slaves: 42)
Channel 43: FXO Kewlstart (Default) (Slaves: 43)
Channel 44: FXO Kewlstart (Default) (Slaves: 44)
Channel 45: FXO Kewlstart (Default) (Slaves: 45)
Channel 46: FXO Kewlstart (Default) (Slaves: 46)
Channel 47: FXO Kewlstart (Default) (Slaves: 47)
Channel 48: FXO Kewlstart (Default) (Slaves: 48)

48 channels configured.

i command ztcfg -vv

but no version of my zaptel was show?did my commands correct?

Hi

when you follow the scratch_install

it will sure guide you to download the version of zaptel

so that is the version iam asking for , or did you download and installed latest version of zaptel ?

ram

Hi ram


sad to say thats., our vicidial and asterisk was installed by our previous IT., and i cant reach him now thats why im quite in troubleshooting this problem in our company? is there any way can i reinstall the zapata? without having problem with the other configs?

Hi

yes you can install

but after installation of zaptel

recompile asterisk also needed, if you are not familiar with the system

better opt a consultant, or setup your own demo systerm before doing live setup.

ram

Hi



Ok ram thanks for the advice.,