Page 1 of 1
codecs g729 and ulaw
Posted:
Mon Dec 17, 2007 1:16 pmby Michael_N
What setup would be best?
g729 codecs on agentphones
g729 codecs on siptrunk
Or
Ulaw on agentphones
g729 codecs on siptrunk
Agents bandwith is not an issue
Only the siptrunks bandwith is
Posted:
Mon Dec 17, 2007 1:17 pmby enjay
ulaw on agents if bandwidth is no issue
g729 on sip trunks.
Posted:
Mon Dec 17, 2007 1:23 pmby Michael_N
enjay wrote:ulaw on agents if bandwidth is no issue
g729 on sip trunks.
what about the conversion between g729 and ulaw?
Posted:
Mon Dec 17, 2007 1:26 pmby enjay
Asterisk will handle the transcoding..
Posted:
Mon Dec 17, 2007 1:30 pmby Michael_N
enjay wrote:Asterisk will handle the transcoding..
Ok fine, but will it be "lesser" transcoding when using ulaw on agentsphone and g729 on siptrunk?
Posted:
Mon Dec 17, 2007 2:06 pmby enjay
anytime you go from one codec to another transcoding is required.. whether its gsm->g729 ulaw->g729 etc.. If you wish to spend the extra $$ on agent phones capable of g.729 and the extra licenses that is of course an option
Posted:
Mon Dec 17, 2007 4:20 pmby Op3r
and I think that will also double the transcoding if you go to
g729 on agent -> g729 to sip trunk.
I believed it has been discussed before. Its quite an acceptable use will be ulaw going to the vicidial server and g729 going to the sip provider.