vicidial.org

by **telconetcol** » Wed Dec 19, 2007 10:22 am

hello.

I have got a server only with pci express slots. I have had troubles with timing in meetme. App_conference appears as no relaible yet. I'd like to use a cheap card for timing. Do you know one ???

by **ramindia** » Wed Dec 19, 2007 11:35 pm

Hi

try at http://x100p.com

ram

by **mflorell** » Thu Dec 20, 2007 9:36 am

The X100P is still only PCI, not PCIexpress. For PCIexpress your best bet is to get the cheapest Sangoma Remora A200 card that you can find. I believe you can get one for under $300

by **telconetcol** » Thu Dec 20, 2007 5:31 pm

thanks for your reply.

by **telconetcol** » Tue Mar 25, 2008 1:26 pm

Hello

I bougth the a200 card (the remora card) empty. I tried to install it but always get the same error...

Mar 25 13:15:19 WARNING[29238]: chan_zap.c:1064 zt_open: Unable to open '/dev/zap/pseudo': No such device or address
Mar 25 13:15:19 ERROR[29238]: chan_zap.c:7551 chandup: Unable to dup channel: No such device or address
Mar 25 13:15:19 WARNING[29238]: app_meetme.c:474 build_conf: Unable to open pseudo channel - trying device
Mar 25 13:15:19 WARNING[29238]: app_meetme.c:477 build_conf: Unable to open pseudo device

I have no idea what to do!!!! some hel would be so appreciated.

by **mflorell** » Tue Mar 25, 2008 7:22 pm

I have heard from another VICIDIAL user that you can use n a200 with no modules for a timer, have you contacted Sangoma for support?

by **telconetcol** » Mon Apr 07, 2008 7:05 pm

noop.

I checked direclty with sangoma and no op.

I had to buy the module. Wuth the module every things seems ok.

by **mxtreme311** » Tue Apr 15, 2008 4:41 pm

Digium now makes PCI-Express T1/E1 cards, I've been using them lately building 1U dialers and they work flawlessly (and I've had less trouble with them and IRQ sharing).

by **telconetcol** » Wed Apr 16, 2008 9:49 am

ohh right thanks.. for the reply.

I'll take ito account.

by **jerm** » Tue Aug 05, 2008 10:02 am

I'm using a Sangoma A200 as a timing source only with no FXO/FXS modules installed and I'm also getting the same error:

Aug 5 08:06:00 WARNING[15756]: chan_zap.c:1064 zt_open: Unable to open '/dev/zap/pseudo': No such device or address
Aug 5 08:06:00 ERROR[15756]: chan_zap.c:7570 chandup: Unable to dup channel: No such device or address
Aug 5 08:06:00 WARNING[15756]: app_meetme.c:480 build_conf: Unable to open pseudo channel - trying device

Outbound calls can be placed directly from the phones, but not through vicidial. I was using ztdummy prior and didn't have this issue. There has been no other changes to the dialplan, only the addition of the card as a timing source.

The drivers were installed per the instructions on the Sangoma wiki. I have the same card installed on 2 other servers that are running straight up asterisk with no vicidial and there is no issue on those servers with meetme conferences (on those servers I have all calls placed out via a meetme conference for listen-in).

I contacted Sangoma support but it appears to not be an issue with the card but something with vicidial.

by **mflorell** » Tue Aug 05, 2008 4:16 pm

I wouldn't say an issue with VICIDIAL, it would be an issue with zaptel/Asterisk

Did you install and configure wanrouter?

Did you then compile zaptel?

After that did you finally compile Asterisk?

by **jerm** » Tue Aug 05, 2008 5:27 pm

Yes, wanrouter was installed and configured.

Zaptel was re-compiled as I'm running Asterisk 1.2.

I already had asterisk installed and running on this machine for 7 months.

by **mflorell** » Tue Aug 05, 2008 8:08 pm

Did you re-compile Asterisk AFTER compiling Zaptel?

vicidial.org

timing card for pci express

timing card for pci express

oki thanks

a200 help

Who is online