Do I need TDM card for manual Dialing (SOLVED)

[yasserin]

Hi! I know vicidial require a TDM for for timing purposes, but my question is if it necesary for Manual Dialing, Cause I install a VicidialNow box and when I tried to log in my softphone do not ring back, so I cant get into the session.
I install vicidial now 1.1 and vicidial rc3

[yasserin]

The curious thing is if I connect that server in a LAN that had already a VICIDIAL server, I can Log in perfectly, but if I disconect the server and the client from the LAN the softphone dont ring at all, Im talking about a single client for one server just to make test.

PD the other server has a TDM card in it

[mflorell]

A TDM card is not required for VICIDIAL to run, but it is recommended. If you cannot login you should post the Asterisk CLI output here so we can debug.

[yasserin]

Thats the problem, when Im connetcted on the LAN with the other server everithing works fine, here are the messages I get from asterisk/log is:

Aug 29 14:35:26 VERBOSE[22470] logger.c: == Parsing '/etc/asterisk/manager.con f': Aug 29 14:35:26 VERBOSE[22470] logger.c: == Parsing '/etc/asterisk/manager .conf': Found
Aug 29 14:35:26 VERBOSE[22470] logger.c: == Manager 'sendcron' logged on from 127.0.0.1
Aug 29 14:35:26 DEBUG[22471] manager.c: Manager received command 'Login'
Aug 29 14:35:26 VERBOSE[22471] logger.c: == Parsing '/etc/asterisk/manager.con f': Aug 29 14:35:26 VERBOSE[22471] logger.c: == Parsing '/etc/asterisk/manager .conf': Found
Aug 29 14:35:26 VERBOSE[22471] logger.c: == Manager 'sendcron' logged on from 127.0.0.1
Aug 29 14:35:26 DEBUG[22470] manager.c: Manager received command 'Hangup'
Aug 29 14:35:26 DEBUG[22471] manager.c: Manager received command 'Originate'
Aug 29 14:35:26 VERBOSE[22473] logger.c: -- Executing MeetMeAdmin("Local/555 58600051@default-741e,2", "8600051|K") in new stack
Aug 29 14:35:26 VERBOSE[22473] logger.c: == Parsing '/etc/asterisk/meetme.conf ': Aug 29 14:35:26 VERBOSE[22473] logger.c: == Parsing '/etc/asterisk/meetme.c onf': Found
Aug 29 14:35:26 NOTICE[22473] app_meetme.c: Conference Number not found
Aug 29 14:35:26 VERBOSE[22473] logger.c: -- Executing Hangup("Local/55558600 051@default-741e,2", "") in new stack
Aug 29 14:35:26 VERBOSE[22473] logger.c: == Spawn extension (default, 55558600 051, 2) exited non-zero on 'Local/55558600051@default-741e,2'
Aug 29 14:35:26 VERBOSE[22473] logger.c: -- Executing DeadAGI("Local/5555860 0051@default-741e,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG- ----16---------------") in new stack
Aug 29 14:35:26 VERBOSE[22473] logger.c: -- AGI Script agi://127.0.0.1:4577/ call_log--HVcauses--PRI-----NODEBUG-----16--------------- completed, returning 0
Aug 29 14:35:26 DEBUG[2381] channel.c: Avoiding initial deadlock for 'Local/5555 8600051@default-741e,2'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'ULGH34581220034926'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '8300'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'default'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'Local/55558600051@defaul t-741e,1'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'Dial'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'Local/55558600051@defaul t'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '2008-08-29 14:35:26'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '2008-08-29 14:35:26'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '0'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '0'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'FAILED'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is 'DOCUMENTATION'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '1220034926.55'
Aug 29 14:35:26 DEBUG[22471] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'ULGH34581220034926'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '55558600051'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'default'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'Local/55558600051@defaul t-741e,2'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'DeadAGI'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'agi://127.0.0.1:4577/cal l_log--HVcauses--PRI-----NODEBUG-----16---------------'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '2008-08-29 14:35:26'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '2008-08-29 14:35:26'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '0'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '0'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'NO ANSWER'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is 'DOCUMENTATION'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '(null)'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '1220034926.56'
Aug 29 14:35:26 DEBUG[22473] pbx.c: Function result is '(null)'
Aug 29 14:35:27 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:27 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:28 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:28 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:28 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:29 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:29 DEBUG[2387] chan_iax2.c: Peer lastms 88, historicms 88, maxms 20 00
Aug 29 14:35:29 DEBUG[2387] chan_iax2.c: Peer lastms 89, historicms 89, maxms 20 00
Aug 29 14:35:29 DEBUG[22484] manager.c: Manager received command 'Login'
Aug 29 14:35:29 VERBOSE[22484] logger.c: == Parsing '/etc/asterisk/manager.con f': Aug 29 14:35:29 VERBOSE[22484] logger.c: == Parsing '/etc/asterisk/manager .conf': Found
Aug 29 14:35:29 VERBOSE[22484] logger.c: == Manager 'sendcron' logged on from 127.0.0.1
Aug 29 14:35:29 DEBUG[22484] manager.c: Manager received command 'Originate'
Aug 29 14:35:29 DEBUG[22484] chan_sip.c: Setting NAT on RTP to 524288
Aug 29 14:35:29 DEBUG[22484] chan_sip.c: Outgoing Call for 3000
Aug 29 14:35:29 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:29 DEBUG[2393] chan_sip.c: (Provisional) Stopping retransmission (b ut retaining packet) on '6b72edf83a2d6a481a1825ac57119fb6@10.24.2.9' Request 102 : Found
Aug 29 14:35:29 DEBUG[22470] manager.c: Manager received command 'Logoff'
Aug 29 14:35:29 VERBOSE[22470] logger.c: == Manager 'sendcron' logged off from 127.0.0.1
Aug 29 14:35:29 DEBUG[22471] manager.c: Manager received command 'Logoff'
Aug 29 14:35:29 VERBOSE[22471] logger.c: == Manager 'sendcron' logged off from 127.0.0.1
Aug 29 14:35:30 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:30 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:31 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:31 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:31 DEBUG[7274] manager.c: Manager received command 'Command'
Aug 29 14:35:32 DEBUG[2393] chan_sip.c: Acked pending invite 102
Aug 29 14:35:32 DEBUG[2393] chan_sip.c: Stopping retransmission on '6b72edf83a2d 6a481a1825ac57119fb6@10.24.2.9' of Request 102: Match Found
Aug 29 14:35:32 DEBUG[2393] chan_sip.c: build_route: Contact hop: <sip:3000@10.2 4.2.11:26082;rinstance=23783ab234e1c22a>
Aug 29 14:35:32 VERBOSE[22484] logger.c: > Channel SIP/3000-09f244a8 was answered.
Aug 29 14:35:32 VERBOSE[22496] logger.c: -- Executing MeetMe("SIP/3000-09f24 4a8", "8600051|F") in new stack
Aug 29 14:35:32 VERBOSE[22496] logger.c: == Parsing '/etc/asterisk/meetme.conf ': Aug 29 14:35:32 VERBOSE[22496] logger.c: == Parsing '/etc/asterisk/meetme.c onf': Found
Aug 29 14:35:32 VERBOSE[22496] logger.c: -- Created MeetMe conference 1023 f or conference '8600051'

but when I unplug the LAN and leave the switch with only the server and the client It doesnt show me nothing on the CLI but in the vicidial LOG it shows me:

2008-08-29 14:44:32|0|1|
Action: Originate
Channel: Local/55558600051@default
Context: default
Exten: 8300
Priority: 1
Callerid: ULGH34581220035461

|
2008-08-29 14:44:33|2|||
2008-08-29 14:44:35|1|||
2008-08-29 14:44:35|1|||
2008-08-29 14:44:37|2|||
2008-08-29 14:44:37|2|||

I dont know, because The ip's and name of the servers and are static, and my softphone regitered it sip account, and even the clients can make calls between them.

[mflorell]

is ztdummy loaded?

type lsmod to find out.

What version of zaptel/asterisk are you using?

[yasserin]

Heres wat it says:

Module Size Used by
zttranscode 11784 0
ztdummy 7816 0
zaptel 181284 4 zttranscode,ztdummy
crc_ccitt 6337 1 zaptel
ipv6 251393 73
ipt_REJECT 9537 1
xt_state 6209 6
ip_conntrack 53025 1 xt_state
nfnetlink 10713 1 ip_conntrack
xt_tcpudp 7105 10
iptable_filter 7105 1
ip_tables 17029 1 iptable_filter
x_tables 17349 4 ipt_REJECT,xt_state,xt_tcpudp,ip_tables
dm_mirror 28741 0
dm_multipath 21577 0
dm_mod 58329 2 dm_mirror,dm_multipath
video 19269 0
sbs 18405 0
backlight 9921 0
i2c_ec 9025 1 sbs
button 10705 0
battery 13637 0
asus_acpi 19289 0
ac 9157 0
lp 15849 0
snd_via82xx 30041 0
snd_ac97_codec 93025 1 snd_via82xx
floppy 57125 0
ac97_bus 6337 1 snd_ac97_codec
snd_seq_dummy 7877 0
snd_seq_oss 32577 0
snd_seq_midi_event 11073 1 snd_seq_oss
snd_seq 49713 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
pcspkr 7105 0
snd_pcm_oss 42945 0
snd_mixer_oss 19009 1 snd_pcm_oss
snd_pcm 72133 3 snd_via82xx,snd_ac97_codec,snd_pcm_oss
snd_timer 24645 2 snd_seq,snd_pcm
snd_page_alloc 14281 2 snd_via82xx,snd_pcm
snd_mpu401_uart 12097 1 snd_via82xx
snd_rawmidi 26561 1 snd_mpu401_uart
snd_seq_device 11725 4 snd_seq_dummy,snd_seq_oss,snd_seq,snd_rawmidi
snd 52293 11 snd_via82xx,snd_ac97_codec,snd_seq_oss,snd_seq,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
soundcore 11553 1 snd
via_rhine 27597 0
i2c_viapro 12117 0
parport_pc 29157 1
mii 9409 1 via_rhine
parport 37385 2 lp,parport_pc
i2c_core 23745 2 i2c_ec,i2c_viapro
ns558 9025 0
gameport 18633 3 snd_via82xx,ns558
serio_raw 10693 0
ide_cd 40033 0
cdrom 36577 1 ide_cd
ext3 123209 2
jbd 56425 1 ext3
ehci_hcd 32973 0
ohci_hcd 23261 0
uhci_hcd 25421 0

asterisk version is the same that vicidial now 1.1 has 1.2.27



Do you believe is a comunication problem, I dont know, maybe some dns or routing problems

[yasserin]

Strange but when I change the name server to a Windows 2003 DNS server, it works, but when I change in resolv.conf to 127.0.0.1 it stop to work, even In the LAN, what can you tell me about this

[mflorell]

sounds like a database hostname lookup issue. You need to turn off hostname lookups in your my.cnf file or at MySQLd startup

[yasserin]

Thanks Matt, I realize that I changed the name of the 127.0.0.1 from localhost to the name of the host:lol: (yeah, yeah, I know I deserve a slap) so the sql coulnt find that host...

Thanks again for your time matt