vicidial.org

Hi

I Install the latest vicidial as per the scratch install document
on one server .
And I install asterisk ver 1.12.12.1 on another server

Both are linked together with an iax2 trunk

Everything is going well except one thing

If i'm dialing directly from my asterisk box , it is dialing with no problems.
If i'm dialing with my vicidial box alone it is dialing with no problems.
If i'm dialing on manual mode with my iax2 trunk ( vicidial and asterisk ) it is dialing with no problems.

But if I set vicidial to auto dial on 1.5 ( adapt_hard_limit )
when my agent is dialing the phone ring at the other end but when the person answer the call we can't heard them , we speak and they can't heard us .... basicely there is no sounds at all... but when I put it back to manual dialing .. everything is fine ....


what can be the problem...


thanks all for your support!!!

hi

this sounds like the same problem we are having, i have posted about it here:

http://www.eflo.net/VICIDIALforum/viewtopic.php?t=855

i suspect it is something to do with the use of an IAX trunk for dialling. our next step will probably be to install a tdm card and test it with that. as nothing i have tried has worked.

has it been tested with an iax trunk before?

i believe so, but cant say for sure.

im still bashing my head against it, i'll let you know if i manage to crack it.

thanks im bashing my head too

if anyone know please let us know!!!

Ok I have setup another vicidial box on standalone on manual dialing there is sounds but on ratio 1.5 auto dial , there is no sounds??????

So the problem is not the IAX trunk , it must be something else....


can anyone know why...

thanks

Please try the SVN 2-X version and use the sip-silence version of the transfer AGI extensions.conf entries(see the docs/conf_examples/extensions.conf.sample file at the very bottom)

I hope to release a snapsot release of this by the end of the week.

thank matt where can I find the document ... where can I found an how to on that subject

becaue i am not very familiar with svn

thanks

http://www.eflo.net/VICIDIALwiki/index.php/SVN:howto

Also, instructions are in the SCRATCH_INSTALL doc for downloading SVN code for astguiclient.

thanks matt ill try that and let you know

Hi Matt

I install the svn 2-X


Now the auto dial is not working at all ... the phone dosent ring..
but on manual dial it is working fine.

this is my screen -r

[root@vicidial admin]# screen -r
There are several suitable screens on:
2768..vicidial (Dead ???)
4526..vicidial (Dead ???)
8404..vicidial (Dead ???)
3860..vicidial (Dead ???)
6903..vicidial (Dead ???)
7467.ASTlisten (Dead ???)
2677.ASTsend (Detached)
4188..vicidial (Dead ???)
1487.ASTVDadapt (Detached)
7109.ASTlisten (Dead ???)
1688..vicidial (Dead ???)
2864.ASTlisten (Dead ???)
3766..vicidial (Dead ???)
5120..vicidial (Dead ???)
2571..vicidial (Dead ???)
2634..vicidial (Dead ???)
3846.ASTsend (Dead ???)
4712..vicidial (Dead ???)
5700.ASTsend (Dead ???)
3041.ASTlisten (Dead ???)
6623..vicidial (Dead ???)
4997..vicidial (Dead ???)
2637.ASTlisten (Detached)
2692.ASTVDremote (Detached)
2696.ASTupdate (Detached)
6814..vicidial (Dead ???)
2845.ASTsend (Dead ???)
2925..vicidial (Dead ???)
5223..vicidial (Dead ???)
2403..vicidial (Dead ???)
6691..vicidial (Dead ???)
Remove dead screens with 'screen -wipe'.
Type "screen [-d] -r [pid.]tty.host" to resume one of them.