DID

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

DID

Postby gmcust3 » Wed Feb 10, 2010 3:14 pm

[red]My server needs to be on STATIC IP to recieve call on my DID ?[/red]
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby gmcust3 » Wed Feb 17, 2010 11:39 am

Any Suggestion ?
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby gmcust3 » Wed Feb 17, 2010 2:02 pm

Do I need to modify ?

; inbound VICIDIAL transfer calls [can arrive through PRI T1 crossover, IAX or SIP channel]
exten => _90009.,1,Answer ; Answer the line
exten => _90009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _90009.,3,Hangup
exten => _990009.,1,Answer ; Answer the line
exten => _990009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _990009.,3,Hangup


I am definitely looking for some assistance if anyone is using Vici for Inbound calls.
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby webgurru » Thu Feb 18, 2010 5:35 am

Dear gmcust3,

For inbound no need of static IP and no need to change these settings. Did you read Manager manual for inbound? It's very easy to configure vici for inbound.

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gmcust3 » Thu Feb 18, 2010 11:05 am

I must say here that I use IPKall.

Anyone tried IPKall with Vici ?

If yes, can anyone share the carrier settings and etc ?
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby webgurru » Thu Feb 18, 2010 12:26 pm

Dear gmcust3,

I don't think there would be special steps for your provider. If your outbound is working and you know DID extension then you can configure inbount without any problem.

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gmcust3 » Thu Feb 18, 2010 12:30 pm

DID extension ?

Sorry , Didnt get you ..
Last edited by gmcust3 on Thu Feb 18, 2010 12:41 pm, edited 1 time in total.
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm

Postby webgurru » Thu Feb 18, 2010 12:37 pm

Dear gmcust3,

DID extension is a number which your provider sent when call comes to you, normally it's the same as your phone number associated with your voip account. The setting which you are showing me is not for inbound, you have to follow steps from Manager Manual to configure inbound. Did you purchased Managet manual, if not you can get this at http://www.eflo.net/store.php#MANAGER

Best regards,
webgurru
 
Posts: 147
Joined: Thu May 07, 2009 11:10 am
Location: United Kingdom

Postby gmcust3 » Thu Feb 18, 2010 1:49 pm

vici*CLI>
-- Executing AGI("SIP/cc101-b7a00d68", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing Dial("SIP/cc101-b7a00d68", "SIP/Fid74/14259981211||tTor") in new stack
-- Called Fid74/14259981211
-- SIP/Fid74-0941af40 is ringing
-- SIP/Fid74-0941af40 is making progress passing it to SIP/cc101-b7a00d68
-- Executing Ringing("SIP/66.54.140.46-b7a062a8", "") in new stack
-- Executing Wait("SIP/66.54.140.46-b7a062a8", "1") in new stack
-- Executing Answer("SIP/66.54.140.46-b7a062a8", "") in new stack
-- Executing AGI("SIP/66.54.140.46-b7a062a8", "agi-VDAD_ALL_inbound.agi|CIDLOOKUPRC-----LB-----SALESLINE-----4259981211-----Closer-----park----------999-----1-----CloserTy") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_inbound.agi
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing Goto("Local/192*168*000*002*78600051@default-4fbf,2", "default|78600051|1") in new stack
-- Goto (default,78600051,1)
-- Executing MeetMe("Local/192*168*000*002*78600051@default-4fbf,2", "8600051|Fq") in new stack
> Channel Local/192*168*000*002*78600051@default-4fbf,1 was answered.
-- Executing Answer("Local/192*168*000*002*78600051@default-4fbf,1", "") in new stack
-- Executing Playback("Local/192*168*000*002*78600051@default-4fbf,1", "ding") in new stack
-- Playing 'ding' (language 'en')
Feb 18 19:25:58 WARNING[16376]: file.c:1045 ast_waitstream: Unexpected control subclass '-1'
-- Executing Hangup("Local/192*168*000*002*78600051@default-4fbf,1", "") in new stack
== Spawn extension (default, 8304, 3) exited non-zero on 'Local/192*168*000*002*78600051@default-4fbf,1'
-- Executing DeadAGI("Local/192*168*000*002*78600051@default-4fbf,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
== Spawn extension (default, 78600051, 1) exited non-zero on 'Local/192*168*000*002*78600051@default-4fbf,2'
-- Executing DeadAGI("Local/192*168*000*002*78600051@default-4fbf,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
-- AGI Script agi-VDAD_ALL_inbound.agi completed, returning 0
-- Executing Goto("SIP/66.54.140.46-b7a062a8", "default|8600051|1") in new stack
-- Goto (default,8600051,1)
-- Executing MeetMe("SIP/66.54.140.46-b7a062a8", "8600051|F") in new stack
-- SIP/Fid74-0941af40 answered SIP/cc101-b7a00d68
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1



I am facing One way Audio !!!
GoAutoDial CE
VERSION: 2.4-309a
BUILD: 110430-1642
No other software installed on the box.
I've read the manager manual.
gmcust3
 
Posts: 1148
Joined: Sat Oct 24, 2009 1:15 pm


Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: Google [Bot] and 93 guests