vicidial.org

Whats are those 3 commands for Installing Sangoma USB VoiceTime ?


--- Results after 105 passes ---
Best: 99.999 -- Worst: 99.594 -- Average: 99.932602, Difference: 99.999870

hi

check the following link it might be useful for installing sangoma USB Voice Time
http://wiki.sangoma.com/sangoma-wanpipe-voicetime

make install
make boot
/etc/init.d/dahdi start

Above 3 commands shld work and Install the same ?

this is what you have to do

1.Download the Wanpipe Voicetime Driver
2.Untar and change directory
3.tar xfz wanpipe-voicetime-<ver>.tgz
4.cd wanpipe-voicetime-<ver>
5.Build Wanpipe VoiceTime for Currently Running Dahdi Module
-> make DAHDI_DIR=/usr/src/dahdi-linux-<ver>

DAHDI_DIR= location of dahdi source used to build and install dahdi module
By default DAHDI_DIR=/usr/src/dahdi

6.Install VoiceTime module into current system
-> make install
7.Install bootup startup script for VoiceTime
-> make boot
8.Start Wanpipe VoiceTime using Zaptel Startup Script
-> /etc/init.d/dahdi start
9.Confirm that VoiceTime Sync Tool is working
-> dahdi_test
it will show 99.999 100 100 100 .....

Above this command, make install , I presume GoAutoDial has it it all ?

GoAutoDial has out of the box support for the Sangoma USB timer stick. Enable it by running:

# make boot -C /usr/src/wanpipe-voicetime-1.0.9

or

# cd /usr/src/wanpipe-voicetime-1.0.9
# make boot

This will automatically load wanpipe_voicetime module on reboots.

gmcust3 wrote:Above this command, make install , I presume GoAutoDial has it it all ?

So, One single Line will do all ?

make boot -C /usr/src/wanpipe-voicetime-1.0.9

Code: Select all


[root@go ~]# cd /usr/src/wanpipe-voicetime-1.0.9
[root@go wanpipe-voicetime-1.0.9]# make boot

Wanpipe VoiceTime Boot Setup Complete!
--------------------------------------

Dahdi /etc/rc.d/init.d/dahdi startup script has been updated with Wanpipe VoiceTime!
The dahdi dummy has now been replaced with wanpipe_voicetime as the
default timing source for dahdi.

Simply start dahdi using: /etc/rc.d/init.d/dahdi start
No other configuratoin is necessary!

[root@go wanpipe-voicetime-1.0.9]#



Code: Select all

[root@go wanpipe-voicetime-1.0.9]# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.999% 99.992% 99.999% 99.997% 99.997% 99.998% 99.997% 99.998%
99.997% 99.996% 99.997% 99.998% 99.998% 99.997% 99.998% 99.997%
99.998% 99.998% 99.997% 99.998% 99.998% 99.997% 99.999% 99.997%
99.998% 99.997% 99.997% 99.998% 99.997% 99.998% 99.998% 99.997%
99.998% 99.998% 99.997% 99.998% 99.997% 99.998% 99.997% 99.998%
99.997% 99.997% 99.999% 99.997% 99.998% 99.997% 99.998% 99.997%
99.997% 99.997% 99.998% 99.997% 99.998% 99.998% 99.998% 99.997%
99.998% 99.998% 99.997% 99.998% 99.998% 99.997% 99.998% 99.998%
99.997% 99.997% 99.998% 99.999% 99.997% 99.998% 99.998% 99.998%
99.998% 99.997% 99.998% 99.998% 99.998% 99.999% 99.996% 99.998%
99.997% 99.998% 99.997%
--- Results after 83 passes ---
Best: 99.999 -- Worst: 99.992 -- Average: 99.997580, Difference: 99.997580
[root@go wanpipe-voicetime-1.0.9]#


After Reboot :

Code: Select all



[root@go ~]# dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.899% 99.906% 99.900% 99.901% 99.901% 99.900% 99.901% 99.901%
99.901% 99.902% 99.901% 99.901% 99.902% 99.901% 99.901% 99.900%
99.901% 99.901% 99.902% 99.900% 99.901% 99.900% 99.900% 99.901%
99.901% 99.901% 99.901% 99.900% 99.893% 99.908% 99.901% 99.901%
99.900% 99.902% 99.901% 99.900% 99.901% 99.900% 99.901% 99.900%
99.902% 99.900% 99.901% 99.901% 99.901% 99.900% 99.900% 99.900%
99.901% 99.901% 99.900% 99.901% 99.901% 99.900% 99.959% 99.999%
100.000% 99.999% 99.999% 100.000% 100.000% 99.999% 100.000% 100.000%
99.999% 100.000% 99.999% 100.000% 99.999% 99.999% 100.000% 99.999%
100.000% 100.000% 99.999% 100.000% 100.000% 99.999% 99.999% 99.999%
100.000% 99.999% 100.000% 99.999% 100.000% 99.999% 99.999% 100.000%
99.999% 100.000% 99.999% 100.000% 99.999% 100.000% 99.999% 100.000%
100.000% 99.999% 99.999% 100.000% 100.000% 99.999% 99.999% 99.999%
100.000% 99.999% 99.999% 99.999% 99.999% 99.999% 100.000% 100.000%
99.999% 99.999% 100.000% 99.999% 99.999% 99.999% 100.000% 100.000%
99.999% 99.999% 99.994% 99.993% 100.000% 99.999% 99.999% 100.000%
99.999% 99.999%
--- Results after 130 passes ---
Best: 100.000 -- Worst: 99.893 -- Average: 99.958011, Difference: 100.041163
[root@go ~]#




After Reboot , Timing is No good in Initial first few phase, but later It also touched 100% !!!!!

Why SO ?

% of No answer Remains Same (

Having a Sangoma USB timer won't increase your call penetration. It just provides a reliable hardware clock to Zaptel/Asterisk system.

gmcust3 wrote:% of No answer Remains Same (

in English: Better quality calls (sounds better). Not better quality list (more answers). For that, you need to change the people you buy your list from! (or validate your numbers before you dial them!)

Hey hey!

The Sangoma wiki says Dahdi 2.6 and above is Not supported but the latest Vicibox server comes with Dahdi 2.6. Has anyone tried to install it anyway? Or are we moving to an XP or similar now?

Thanks!