Page 1 of 1
Setup requirements
Posted:
Wed Mar 23, 2011 6:36 amby webgurru
Hi All,
I want to setup goautodial for recording in and out calls from 2 analog lines (these are standard uk bt lines not an isdn). What type of card required for this. I have already setup using voip, this would be my first setup using telco card. Is this be as easy as setting up voip?
Best regards,
Webgurru
tdm cards
Posted:
Wed Mar 23, 2011 8:08 amby striker
Either you can use digium tdm cards or sangoma cards for connecting the analog lines.
you can also use the grandstream Ht analog gateways, for connectig through analog lines. for this u need to create a sip trunk between vicidial and gateway.
Posted:
Wed Mar 23, 2011 8:27 amby webgurru
Hi Striker,
Thanks for your reply. Could you please name a model which would be easy to configure with goautodial?
Best regards,
Webgurru
digium tdm410p
Posted:
Wed Mar 23, 2011 9:57 amby striker
digium TDM410p with work smootly with goautodial
Posted:
Wed Mar 23, 2011 10:44 pmby williamconley
grandstream also makes a nice 4 port gateway which can be EXTERNAL (ie: no card in the box so if the box dies you can chuck it in the trash can, restore your backup image on a new box and go back to work without any special hardware in the new box either, even allows for a hot-spare
)
Posted:
Fri Oct 21, 2011 2:03 pmby noworldorder
you can also use the grandstream Ht analog gateways, for connectig through analog lines. for this u need to create a sip trunk between vicidial and gateway.
so you could use this:
http://www.telephonydepot.com/Catalog/G ... rt?whence=
and no other hardware for 4 analog lines? If so is this a tricky proceedure?