Page 1 of 1

Problem with goautodial (error 9338)(9093)(9096)

PostPosted: Sun May 15, 2011 8:16 am
by sagar.thakar1
It went everything normal in the beginning but now my sip account doesn't get register. when i do "sip show registry" in asterisk -r it shows that my VoIP account is unregistered. Even though my settings are very normal.
I get errors like

Host Username Refresh State Reg.Time
202.71.134.8:5060 052620594 120 Unregistered
[May 15 09:11:49] ERROR[9093]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
[May 15 09:11:49] ERROR[9093]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
[May 15 09:11:49] ERROR[9093]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
== Manager 'sendcron' logged off from 127.0.0.1
[May 15 09:11:49] ERROR[9096]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
[May 15 09:11:49] ERROR[9096]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
[May 15 09:11:49] ERROR[9096]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe
== Manager 'sendcron' logged off from 127.0.0.1
[May 15 09:11:53] WARNING[9094]: chan_sip.c:3095 create_addr: No such host: goautodial
[May 15 09:11:53] WARNING[9094]: app_dial.c:1296 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [h@default:1] DeadAGI("Local/919174464643@default-e167,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----20-----CHANUNAVAIL----------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[May 15 09:11:53] WARNING[9097]: chan_sip.c:3095 create_addr: No such host: goautodial
[May 15 09:11:53] WARNING[9097]: app_dial.c:1296 dial_exec_full: Unable to create channel of type 'SIP' (cause 20 - Unknown)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing [h@default:1] DeadAGI("Local/912403466630@default-06c0,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----20-----CHANUNAVAIL----------") in new stack
[/img]

addition

PostPosted: Sun May 15, 2011 8:19 am
by sagar.thakar1
and i also get errors like:-
[May 15 09:17:06] ERROR[10916]: utils.c:966 ast_carefulwrite: write() returned error: Broken pipe

SOMEBODY PLEASE HELPPPPPPPPPPPPPPPPPP

MY HARDWARE INFORMATION :
Processors
2



Model
Intel(R) Pentium(R) Dual CPU E2200 @ 2.20GHz @ 30°C



CPU Speed
2.21 GHz



Cache Size
1024.00 KB



System Bogomips
8851.13



PCI Devices

- Audio device: Intel Corporation 82801G
- Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller
- Host bridge: Intel Corporation 82G33/G31/P35/P31 Express DRAM Controller
- IDE interface: Intel Corporation 82801G
- IDE interface: Intel Corporation 82801GB/GR/GH
- ISA bridge: Intel Corporation 82801GB/GR
- PCI bridge: Intel Corporation 82801 PCI Bridge
- (2x) PCI bridge: Intel Corporation 82801G
- SMBus: Intel Corporation 82801G
- (5x) USB Controller: Intel Corporation 82801G
- VGA compatible controller: Intel Corporation 82G33/G31 Express Integrated Graphics Controller




IDE Devices

- hda: ATAPI CD N DH52N2P




SCSI Devices

- ATA WDC WD5000AADS-0 (Direct-Access)



USB Devices
none

sip settings

PostPosted: Sun May 15, 2011 10:11 am
by striker
post your sip settings here

what you installed 1.goautodial or 2.vicibox

check whether u r able to ping google.com from the console.

if not check the network settings
type setup-networksetting (or)

in goautodial gui select admin--network settings.