vicidial.org

version -
goautodial CE 2.1

carriers settings
[SIPtrunk]
disallow=all
allow=all
type=peer
username=confidential
fromuser=confidential
authuser=confidential
secret=confidential
host=confidential
nat=yes
qualify=yes
canreinvite=yes
insecure=very
context=default
dtmfmode=rfc2833

dial plan entry
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(SIP/${EXTEN:1}@SIPtrunk,55,o)
exten => _91NXXNXXXXXX,3,Hangup


CLi o/p:

Executing [912127773456@default:1] AGI("SIP/8001-00000014", "agi://127.0.0.1:4577/call_log") in new stack
[Jul 12 15:48:22] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Jul 12 15:48:22] -- Executing [912127773456@default:2] Dial("SIP/8001-00000014", "SIP/12127773456@SIPtrunk|55|o") in new stack
[Jul 12 15:48:22] -- Called 12127773456@SIPtrunk
[Jul 12 15:48:22] -- SIP/SIPtrunk-00000015 is circuit-busy
[Jul 12 15:48:22] == Everyone is busy/congested at this time (1:0/1/0)
[Jul 12 15:48:22] -- Executing [912127773456@default:3] Hangup("SIP/8001-00000014", "") in new stack
[Jul 12 15:48:22] == Spawn extension (default, 912127773456, 3) exited non-zero on 'SIP/8001-00000014'
[Jul 12 15:48:22] -- Executing [h@default:1] DeadAGI("SIP/8001-00000014", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CONGESTION----------") in new stack
[Jul 12 15:48:22] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0


I really dont know why the calls not getting connected. if i dial from eyebeam i get this output......

If i dial from agent login the cli o/p is below

CLi Op:
-- Executing [8600052@default:1] MeetMe("Local/8600052@def ault-df22,2", "8600052|F") in new stack
[Jul 12 16:12:04] > Channel Local/8600052@default-df22,1 was answered.
[Jul 12 16:12:04] -- Executing [919493751920@default:1] AGI("Local/8600052@d efault-df22,1", "agi://127.0.0.1:4577/call_log") in new stack
[Jul 12 16:12:04] -- AGI Script agi://127.0.0.1:4577/call_log completed, ret urning 0
[Jul 12 16:12:04] -- Executing [919493751920@default:2] Dial("Local/8600052@ default-df22,1", "SIP/SIPtrunk/19493751920|55|o") in new stack
[Jul 12 16:12:04] -- Called SIPtrunk/19493751920
[Jul 12 16:12:04] -- SIP/SIPtrunk-00000021 is circuit-busy
[Jul 12 16:12:04] == Everyone is busy/congested at this time (1:0/1/0)
[Jul 12 16:12:04] -- Executing [919493751920@default:3] Hangup("Local/860005 2@default-df22,1", "") in new stack
[Jul 12 16:12:04] == Spawn extension (default, 919493751920, 3) exited non-zer o on 'Local/8600052@default-df22,1'
[Jul 12 16:12:04] -- Executing [h@default:1] DeadAGI("Local/8600052@default- df22,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----1-----CON GESTION----------") in new stack
[Jul 12 16:12:04] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI -----NODEBUG-----1-----CONGESTION---------- completed, returning 0
[Jul 12 16:12:04] == Spawn extension (default, 8600052, 1) exited non-zero on 'Local/8600052@default-df22,2'
[Jul 12 16:12:04] -- Executing [h@default:1] DeadAGI("Local/8600052@default- df22,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0-------- -------") in new stack
[Jul 12 16:12:04] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI -----NODEBUG-----0--------------- completed, returning 0

And in agent login page we get a dial alert message as below:

DIAL ALERT:

Call Rejected: CONGESTION
Cause: 1 - Unallocated (unassigned) number.

so please help me to get this resolved.

Thank you in advance

register your carrier sip account directly in eyebeam , and check wether you are able to make outgoing calls

if the calls goes then check the wether proper codec is installed in server and the supported codec by your provider