vicidial.org

Hi Experts ,
Am not able to do outgoing calls its not passsing

[Sep 29 10:52:09] -- Executing [99327926988@default:1] AGI("SIP/101- 00000004", "agi://127.0.0.1:4577/call_log") in new stack
[Sep 29 10:52:09] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Sep 29 10:52:09] -- Executing [9894031561@default:2] Dial("SIP/101-00000004", "DAHDI/g0/894031561||tToR") in new stack
[Sep 29 10:52:09] -- Requested transfer capability: 0x00 - SPEECH
[Sep 29 10:52:09] -- Called g0/894031561
[Sep 29 10:52:10] -- DAHDI/1-1 answered SIP/101-00000004
go*CLI>


After that Some Voice playing Am not getting Ring or calls


My Config Dahdi_channel
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
group=0,11
context =trunkinbound
switchtype = euroisdn
signalling = pri_net
channel => 1-15,17-31
context = default
group = 63

; Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
group=0,12
context=trunkinbound
switchtype = euroisdn
signalling = pri_cpe
channel => 32-46,48-62
context = default
group = 63

System.conf


# Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
span=1,1,0,ccs,hdb3,crc4
# termtype: te
bchan=1-15,17-31
dchan=16
echocanceller=mg2,1-15,17-31

# Span 2: TE2/0/2 "T2XXP (PCI) Card 0 Span 2"
span=2,2,0,ccs,hdb3,crc4
# termtype: te
bchan=32-46,48-62
dchan=47
echocanceller=mg2,32-46,48-62

# Global data

loadzone = us
defaultzone = us
--------------------------------------------------------


If am changing
; Span 1: TE2/0/1 "T2XXP (PCI) Card 0 Span 1" (MASTER) HDB3/CCS/CRC4
group=0,11
context =trunkinbound
switchtype = euroisdn
signalling = pri_net --------------------pri_net to pri_cpe am getting errors
channel => 1-15,17-31
context = default
group = 63

ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 10:59:04] WARNING[25030]: chan_dahdi.c:11378 pri_dchannel: PRI Error on span 1: We think we're the CPE, but they think they're the CPE too.

[Sep 29 11:25:51] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:52] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:53] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:54] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:55] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:56] ERROR[25030]: chan_dahdi.c:10218 dahdi_pri_error: !! Frame got rejected!
[Sep 29 11:25:56] WARNING[25030]: chan_dahdi.c:11378 pri_dchannel: PRI Error on span 1: We think we're the CPE, but they think they're the CPE too.

Dahdi
Description Alarms IRQ bpviol CRC4
T2XXP (PCI) Card 0 Span 1 OK 0 0 0

Pri span

PRI span 1/0: Provisioned, Up, Active



My dialplan
Menton=DAHDI/g0

exten => _929X.,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _929X.,2,Dial(${MENTON}/${EXTEN:3},,tTor)
exten => _929X.,3,Hangup()

Any one help me for this Thank x

Goautodial
VERSION: 2.4-309a Digium 2Span Pricard No other softwares
BUILD: 110430-1642
© 2011 ViciDial Group

The number which you dialled is not using the dialplan which you have wrriten.
typ the following command in the asterisk cli and see which dialplan is coinciding

asterisk>dialplan show 9894031561@default

Thank you for your reply striker I have tried many valid numbers also here i mensioned 9 digits buts i have tried many active numbers calls are not passing out

Hi newleaner

I think you didnt red my post properly !!!!!!!

can you type the below command in your asterisk cli and paste the out put here
dialplan show 9894031561@default

Hi striker here is my cli result

dialplan show 9894031561@default
[ Context 'default' created by 'pbx_config' ]
'_9X.' => 1. AGI(agi://127.0.0.1:4577/call_log) [pbx_config]
2. Dial(${MENTON}/${EXTEN:1}||tTor) [pbx_config]
3. Hangup() [pbx_config]

[Oct 4 14:33:39] -- B-channel 0/20 successfully restarted on span 1
[Oct 4 14:33:39] NOTICE[12088]: chan_dahdi.c:10518 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Oct 4 14:33:39] -- B-channel 0/21 successfully restarted on span 1
[Oct 4 14:33:39] NOTICE[12088]: chan_dahdi.c:10518 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Oct 4 14:33:49] NOTICE[12088]: chan_dahdi.c:10518 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
[Oct 4 14:33:50] -- B-channel 0/22 successfully restarted on span 1
[Oct 4 14:33:51] ERROR[12088]: chan_dahdi.c:10218 dahdi_pri_error: !! Got reject for frame 27, but we have nothing -- resetting!

and here

console dial 9894031561@default
[Oct 4 14:38:05] WARNING[12484]: chan_oss.c:687 setformat: Unable to re-open DSP device /dev/dsp: No such file or directory
[Oct 4 14:38:05] -- Executing [9894031561@default:1] AGI("Console/dsp", "agi://127.0.0.1:4577/call_log") in new stack
[Oct 4 14:38:05] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Oct 4 14:38:05] -- Executing [9894031561@default:2] Dial("Console/dsp", "DAHDI/g0/9894031561||tTor") in new stack
[Oct 4 14:38:05] -- Requested transfer capability: 0x00 - SPEECH
[Oct 4 14:38:05] -- Called g0/9894031561
[Oct 4 14:38:06] == Parsing '/etc/asterisk/manager.conf': [Oct 4 14:38:06] Found
[Oct 4 14:38:06] == Manager 'sendcron' logged on from 127.0.0.1
[Oct 4 14:38:06] NOTICE[12088]: chan_dahdi.c:10518 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1

hi
as per the dialplan "Dial(${MENTON}/${EXTEN:1}||tTor)" it should remove the 9 , but in ur case its dialling without removing the 9

Hi
Thank x for supporting me i wil check and update here ..