Page 1 of 1

System Performance

PostPosted: Sat Nov 23, 2013 3:42 am
by bbakirtas
Hi
İ'm using
VERSION: 2.4-309a
BUILD: 110430-1642

60 agent

Kernel Version 2.6.18-238.9.1.el5.goPAE (SMP)
Distro Name GoAutoDial CE 2.1
Uptime 1 hours 44 minutes
Current Users 1
Load Averages 6.26 7.18 5.96
40.93%

Device Received Sent Err/Drop
lo 409.42 MB 409.42 MB 0/0
eth0 2.30 GB 2.04 GB 0/0

Type Percent Capacity Free Used Size
Physical Memory 7% 29.38 GB 2.35 GB 31.73 GB
- Kernel + applications 2% 756.44 MB
- Buffers 0% 42.48 MB
- Cached 5% 1.57 GB
Disk Swap 0% 1019.74 MB 0.00 KB 1019.74 MB


Model Intel(R) Xeon(R) CPU E5506 @ 2.13GHz ( 2 Cpu)
CPU Speed 2.13 GHz
Cache Size 4.00 MB
System Bogomips 34134.88
PCI Devices
- (2x) Ethernet controller: Intel Corporation 82576 Gigabit Network Connection
- Host bridge: Intel Corporation 5500 I/O Hub to ESI Port
- IDE interface: Intel Corporation 82801JI 2 port SATA IDE Controller #2
- IDE interface: Intel Corporation 82801JI 4 port SATA IDE Controller #1
- ISA bridge: Intel Corporation 82801JIR LPC Interface Controller
- PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1
- PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 3
- PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 7
- PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 9
- PCI bridge: Intel Corporation 82801 PCI Bridge
- PCI bridge: Intel Corporation 82801JI PCI Express Root Port 1
- PCI bridge: Intel Corporation 82801JI PCI Express Root Port 4
- PIC: Intel Corporation 5520/5500/X58 I/O Hub Control Status and RAS Registers
- PIC: Intel Corporation 5520/5500/X58 I/O Hub GPIO and Scratch Pad Registers
- PIC: Intel Corporation 5520/5500/X58 I/O Hub System Management Registers
- SMBus: Intel Corporation 82801JI SMBus Controller
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #1
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #2
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #3
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #4
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #5
- USB Controller: Intel Corporation 82801JI USB UHCI Controller #6
- USB Controller: Intel Corporation 82801JI USB2 EHCI Controller #1
- USB Controller: Intel Corporation 82801JI USB2 EHCI Controller #2
- VGA compatible controller: Matrox Graphics, Inc. MGA G200e [Pilot] ServerEngines
IDE Devices none
SCSI Devices
- ATA INTEL SSDSA2CW12 (Direct-Access)
USB Devices
- GreenAsia Inc. Multimedia Keyboard Controller
- Standard Microsystems Corp. USB 2.0 Hub

What could be the reason?

Re: System Performance

PostPosted: Sun Nov 24, 2013 12:08 am
by williamconley
What could be the reason for ... what?

A single server overloading with more than 25 agents on it? (If that is, indeed, your question: The reason is because most 4 processor servers can handle 25 agents ... you need a cluster instead of a single server if you have more than 25 agents, especially with a 2 processor server).

If that is not your question ... please ask and we'll see what we can do.

Re: System Performance

PostPosted: Mon Nov 25, 2013 2:11 am
by bbakirtas
Thank you my question (A single server overloading with more than 25 agents on it? )
i got 2 cpu (with 4 core) but my minimum Load Averages 7. my problem averages.it too high? and my asterisk doesn't work accurate.

Re: System Performance

PostPosted: Fri Nov 29, 2013 10:16 pm
by gardo
Are you experiencing any issues? How many total cores do you have (2 CPU X 4 cores = 8 cores?)?

Re: System Performance

PostPosted: Sat Nov 30, 2013 2:52 am
by williamconley
my asterisk doesn't work accurate
explain in detail please.