Failed to authenticate on INVITE to '"M0612121024000000

General and Support topics relating to ViciDialNow and GoAutoDial ISO installers

Moderators: enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, s0lid

Failed to authenticate on INVITE to '"M0612121024000000

Postby 28300 » Thu Jun 12, 2008 11:41 am

Hi,

Im getting this error after fresh install. can ne1 point me to right direction.
initially i faced the 'this is not a valid extension' error.
is it possible that dialplan is still misconfigured??

i use sip phones & sip trunk
sip.conf & extensions.conf is attached
asterisk output is also attached

for dial prefix in my campaign i use X
i have country code added in my leads

===============
asterisk output
===================

Asterisk 1.2.27, Copyright (C) 1999 - 2007 Digium, Inc. and others.

Created by Mark Spencer <markster@digium.com>

Asterisk comes with ABSOLUTELY NO WARRANTY; type 'show warranty' for details.

This is free software, with components licensed under the GNU General Public

License version 2 and other licenses; you are welcome to redistribute it under

certain conditions. Type 'show license' for details.

=========================================================================

Connected to Asterisk 1.2.27 currently running on vicidialnow (pid = 2619)
vicidialnow*CLI>
Verbosity is at least 21

vicidialnow*CLI>
-- Remote UNIX connection

vicidialnow*CLI>

== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing MeetMe("Local/8600051@default-bc1d,2", "8600051|F") in new stack
> Channel Local/8600051@default-bc1d,1 was answered.
-- Executing AGI("Local/8600051@default-bc1d,1", "agi://127.0.0.1:4577/call_log") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
-- Executing Dial("Local/8600051@default-bc1d,1", "SIP/441738628138@SIPtrunk|55|tTo") in new stack
-- Called 441738628138@SIPtrunk

vicidialnow*CLI>
Jun 12 12:10:24 NOTICE[2630]: chan_sip.c:9883 handle_response_invite: Failed to authenticate on INVITE to '"M0612121024000000009" <sip:0000000000@61.12.3.210>;tag=as1df45123'

vicidialnow*CLI>
-- SIP/SIPtrunk-08b01790 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("Local/8600051@default-bc1d,1", "") in new stack
== Spawn extension (default, 441738628138, 3) exited non-zero on 'Local/8600051@default-bc1d,1'
-- Executing DeadAGI("Local/8600051@default-bc1d,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----16-----CONGESTION----------") in new stack

vicidialnow*CLI>
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0

vicidialnow*CLI>
== Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-bc1d,2'
-- Executing DeadAGI("Local/8600051@default-bc1d,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack

vicidialnow*CLI>
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0

vicidialnow*CLI>
== Manager 'sendcron' logged off from 127.0.0.1

vicidialnow*CLI>



=========
here's my sip.conf
============
[general]
port = 5060
bindaddr = 0.0.0.0
context = default
; register SIP account on remote machine if using SIP trunks
register => xxxxx:xxxxx@xxx.xxx.xxx.xxx:5060

; setup account for SIP trunking:
[SIPtrunk]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=91030
secret=03087
host=203.196.128.55
dtmfmode=inband
qualify=1000

[cc100]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=cc100
secret=test
host=dynamic
dtmfmode=inband
defaultip=192.168.1.2
qualify=1000
mailbox=100


=============
extensions.conf
=================
[general]
static=yes
writeprotect=no

[globals]
CONSOLE=Console/dsp ; Console interface for demo
TRUNK=Zap/g1 ; Trunk interface
TRUNKX=Zap/g2 ; 2nd trunk interface
TRUNKIAX=IAX2/ASTtest1:test@10.10.10.16:4569 ; IAX trunk interface
TRUNKIAX1=IAX2/ASTtest1:test@10.10.10.16:4569 ; IAX trunk interface
TRUNKBINFONE=IAX2/1112223333:PASSWORD@iax.binfone.com ; IAX trunk interface
SIPtrunk=SIP/xxxxx:xxxxx@203.196.128.55 ; SIP trunk
TRUNKloop = IAX2/ASTloop:test@127.0.0.1:40569 ; used for blind monitoring
TRUNKblind = IAX2/ASTblind:test@127.0.0.1:41569 ; used for testing


[default]

; BE SURE TO CHANGE THIS LINE FOR YOUR IP ADDRESS!
exten => _61*12*3*209*.,1,Goto(default,${EXTEN:16},1)
exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
; Local blind monitoring
exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)


; Example phone extensions

; Extension 2000 Sipura/Linksys ATA line 1
exten => 2000,1,Dial(sip/spa2000,30,to) ; Ring, 30 secs max
exten => 2000,2,Voicemail,u2000 ; Send to voicemail...
; Extension 2001 Sipura/Linksys ATA line 2
exten => 2001,1,Dial(sip/spa2001,30,to) ; Ring, 30 secs max
exten => 2001,2,Voicemail,u2001 ; Send to voicemail...
; Extension 2102 rings Grandstream phone
exten => 2102,1,Dial(sip/gs102,30,to) ; Ring, 30 secs max
exten => 2102,2,Voicemail,u2102 ; Send to voicemail...
; Extension 401 rings the firefly softphone
exten => 401,1,Dial((IAX2/firefly01@firefly01/s||t)
exten => 401,2,Hangup

; extensions for other SIP and IAX call center phones
; cc100-cc150 SIP Phones
exten => _1[0-5]X,1,Dial(sip/cc${EXTEN},20,to)
; cc300-cc350 IAX Phones
exten => _3[0-5]X,1,Dial(IAX2/cc${EXTEN},20,to)

; extensions if using a T1 channelbank
exten => _19XX,1,Dial(Zap/${EXTEN:2},30,o)
exten => _19XX,2,Hangup

; Extension 4001 rings Zap phone (this example for FXS on Zap port 1)
exten => 4001,1,Dial(Zap/1,30,o) ; ring Zap device 1
exten => 4001,2,Voicemail,u4001 ; Send to voicemail...


; # timeout invalid rules
exten => #,1,Playback(invalid) ; "Thanks for trying the demo"
exten => #,2,Hangup ; Hang them up.
exten => t,1,Goto(#,1) ; If they take too long, give up
exten => i,1,Playback(invalid) ; "That's not valid, try again"

; Give voicemail at extension 8500
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)

; FastAGI for VICIDIAL/astGUIclient call logging
exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log--HVcauses ... EBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Inbound call from BINFONE
; exten => 1112223333,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => 1112223333,2,Dial(sip/gs102,55,o)
; exten => 1112223333,3,Hangup

; Extension 7275551212 - Inbound local number from PRI with 10 digit delivery
exten => 7275551212,1,Ringing
exten => 7275551212,2,Wait(1)
exten => 7275551212,3,AGI(agi://127.0.0.1:4577/call_log--fullCID--${EXTEN}-----${CALLERID}-----${CALLERIDNUM}-----${CALLERIDNAME})
exten => 7275551212,4,Answer
exten => 7275551212,5,Dial(sip/spa2000&sip/spa2001,30,To)
exten => 7275551212,6,Voicemail,u2000

; dial a long distance outbound number to the UK
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _44XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _44XXXXXXXXXX,2,Dial(SIP/${EXTEN}@SIPtrunk,55,tTo)
exten => _44XXXXXXXXXX,3,Hangup

; dial a long distance outbound number to Australia
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _901161XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901161XXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _901161XXXXXXXXX,3,Hangup

rest is generic
28300
 
Posts: 43
Joined: Sun Nov 04, 2007 11:42 am

Return to ViciDialNow - GoAutoDial

Who is online

Users browsing this forum: No registered users and 27 guests