amd

[advanceuser]

amd?

[mflorell]

What kind of telco-interface card are you using?

[carrycom]

I am having the same problem

[mflorell]

You are having the same problem, and yet you do not tell us your telco-interface either.

[john_usc]

I can not dial out either. It registers my phone fine. However when I make a call gives an error message that person can not be reached. I am using SIP trunk with voisepulse as my provider.

XXXXXXXXXX
sip.config
XXXXXXXXXX
[general]
context=banned


register => login:pass@voicepulse.com ; Version 080812
register => login:pass@voicepulse.com ; Version 080812


[voicepulse-primary] ; Version 080812
type=peer
context=voicepulse-in
host=voicepulse.com
username=username
secret=password
qualify=yes
allow=all
canreinvite=no
dtmfmode=rfc2833
rfc2833compensate=yes
insecure=port,invite
trustrpid=yes

[voicepulse-backup] ; Version 080812
type=peer
context=voicepulse-in
host=voicepulse.com;
username=username
secret=secret
qualify=yes
allow=all
canreinvite=no
dtmfmode=rfc2833
rfc2833compensate=yes
insecure=port,invite
trustrpid=yes

[2000]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=2000
secret=2000
host=dynamic
dtmfmode=inband
qualify=1000
mailbox=2000


XXXXXXXXXXXXXXXXX
extension.conf
XXXXXXXXXXXXXXXXXX

[general]
static=yes
writeprotect=no

[globals]
CONSOLE=Console/dsp ; Console interface for demo
;TRUNK=Zap/g1 ; Trunk interface
;TRUNKX=Zap/g2 ; 2nd trunk interface
;TRUNKIAX=IAX2/ASTtest1:test@10.10.10.16:4569 ; IAX trunk interface
;TRUNKIAX1=IAX2/ASTtest1:test@10.10.10.16:4569 ; IAX trunk interface
;TRUNKBINFONE=IAX2/1112223333:PASSWORD@iax.binfone.com ; IAX trunk interface
SIPtrunk=SIP/username:password@voicepulse.com ; SIP trunk
;TRUNKloop = IAX2/ASTloop:test@127.0.0.1:40569 ; used for blind monitoring
;TRUNKblind = IAX2/ASTblind:test@127.0.0.1:41569 ; used for testing


[default]

; BE SURE TO CHANGE THIS LINE FOR YOUR IP ADDRESS!
exten => _192*168*002*002*.,1,Goto(default,${EXTEN:16},1)
exten => _8600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
exten => _78600XXX*.,1,AGI(agi-VDADfixCXFER.agi)
; Local blind monitoring
exten => _08600XXX,1,Dial(${TRUNKblind}/6${EXTEN:1},55,To)


; Example phone extensions

; Extension 2000 Sipura/Linksys ATA line 1
exten => 2000,1,Dial(sip/spa2000,30,to) ; Ring, 30 secs max
exten => 2000,2,Voicemail,u2000 ; Send to voicemail...
; Extension 2001 Sipura/Linksys ATA line 2
exten => 2001,1,Dial(sip/spa2001,30,to) ; Ring, 30 secs max
exten => 2001,2,Voicemail,u2001 ; Send to voicemail...
; Extension 2102 rings Grandstream phone
exten => 2102,1,Dial(sip/gs102,30,to) ; Ring, 30 secs max
exten => 2102,2,Voicemail,u2102 ; Send to voicemail...
; Extension 401 rings the firefly softphone
exten => 401,1,Dial((IAX2/firefly01@firefly01/s||t)
exten => 401,2,Hangup

; extensions for other SIP and IAX call center phones
; cc100-cc150 SIP Phones
exten => _1[0-5]X,1,Dial(sip/cc${EXTEN},20,to)
; cc300-cc350 IAX Phones
exten => _3[0-5]X,1,Dial(IAX2/cc${EXTEN},20,to)

; extensions if using a T1 channelbank
exten => _19XX,1,Dial(Zap/${EXTEN:2},30,o)
exten => _19XX,2,Hangup

; Extension 4001 rings Zap phone (this example for FXS on Zap port 1)
exten => 4001,1,Dial(Zap/1,30,o) ; ring Zap device 1
exten => 4001,2,Voicemail,u4001 ; Send to voicemail...


; # timeout invalid rules
exten => #,1,Playback(invalid) ; "Thanks for trying the demo"
exten => #,2,Hangup ; Hang them up.
exten => t,1,Goto(#,1) ; If they take too long, give up
exten => i,1,Playback(invalid) ; "That's not valid, try again"

; Give voicemail at extension 8500
exten => 8500,1,VoicemailMain
exten => 8500,2,Goto(s,6)

; FastAGI for VICIDIAL/astGUIclient call logging
exten => h,1,DeadAGI(agi://127.0.0.1:4577/call_log--HVcauses ... EBUG-----${HANGUPCAUSE}-----${DIALSTATUS}-----${DIALEDTIME}-----${ANSWEREDTIME})

; Inbound call from BINFONE
; exten => 1112223333,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => 1112223333,2,Dial(sip/gs102,55,o)
; exten => 1112223333,3,Hangup

; Extension 7275551212 - Inbound local number from PRI with 10 digit delivery
exten => 7275551212,1,Ringing
exten => 7275551212,2,Wait(1)
exten => 7275551212,3,AGI(agi://127.0.0.1:4577/call_log--fullCID--${EXTEN}-----${CALLERID}-----${CALLERIDNUM}-----${CALLERIDNAME})
exten => 7275551212,4,Answer
exten => 7275551212,5,Dial(sip/spa2000&sip/spa2001,30,To)
exten => 7275551212,6,Voicemail,u2000

; dial a long distance outbound number to the UK
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _901144XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901144XXXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},55,To)
exten => _901144XXXXXXXXXX,3,Hangup

; dial a long distance outbound number to Australia
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls,
exten => _901161XXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _901161XXXXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _901161XXXXXXXXX,3,Hangup

; Extensions for performance testing
exten => _91999NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91999NXXXXXX,2,Dial(${TRUNKloop}/${EXTEN:2},,tTo)
exten => _91999NXXXXXX,3,Hangup
exten => 999999999999,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 999999999999,2,Dial(${TRUNKloop}/${EXTEN:1},,tTo)
exten => 999999999999,3,Hangup

; dial an 800 outbound number
exten => _91800NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91800NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91800NXXXXXX,3,Hangup
exten => _91888NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91888NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91888NXXXXXX,3,Hangup
exten => _91877NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91877NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91877NXXXXXX,3,Hangup
exten => _91866NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91866NXXXXXX,2,Dial(${TRUNK}/${EXTEN:1},,To)
exten => _91866NXXXXXX,3,Hangup

; dial a local outbound number (modified because of only LD T1)
exten => _9NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9NXXXXXX,2,Dial(${TRUNK}/1727${EXTEN:1},,To)
exten => _9NXXXXXX,3,Hangup

; dial a local 727 outbound number with area code
exten => _9727NXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _9727NXXXXXX,2,Dial(${TRUNK}/1${EXTEN:1},,To)
exten => _9727NXXXXXX,3,Hangup

; dial a long distance outbound number
; This 'o' Dial flag is VERY important for VICIDIAL on outbound calls
exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(${TRUNKX}/${EXTEN:1},,To)
exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through BINFONE
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(${TRUNKIAX}/${EXTEN},55,To)
; exten => _91NXXNXXXXXX,3,Hangup
; dial a long distance outbound number through a SIP provider
; exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
; exten => _91NXXNXXXXXX,2,Dial(sip/${EXTEN}@SIPtrunk,55,o)
; exten => _91NXXNXXXXXX,3,Hangup

; parameters for call_inbound.agi (7 fields separated by five dashes "-----"):
; 1. the extension of the phone to ring as defined in the asterisk.phones table
; 2. the phone number that was called, for the live_inbound/_log entry
; 3. a text description of the number that was called in
; 4-7. optional fields, they are also passed as fields in the GUI to web browser
; This is not part of VICIDIAL, it is for astGUIclient agent use only

; Extension 3429 - Inbound 800 number (1-800-555-3429) example of RBS T1
; with 10 digit ANI and 4 digit DNIS star separated
exten => _**3429,1,Ringing
exten => _**3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _**3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _**3429,4,Answer
exten => _**3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _**3429,6,Voicemail,u2000
; Extension 3429 - with ANI [callerID]
exten => _*NXXNXXXXXX*3429,1,Ringing
exten => _*NXXNXXXXXX*3429,2,AGI(agi://127.0.0.1:4577/call_log)
exten => _*NXXNXXXXXX*3429,3,AGI(call_inbound.agi,spa2000-----8005553429-----Inbound 800-----x-----y-----z-----w)
exten => _*NXXNXXXXXX*3429,4,Answer
exten => _*NXXNXXXXXX*3429,5,Dial(sip/spa2000&sip/spa2001,30,to)
exten => _*NXXNXXXXXX*3429,6,Voicemail,u2000


; parameters for agi-VDAD_ALL_inbound.agi (9 fields separated by five dashes "-----"):
; 1. the method of call handling for the script:
; - CID - CID received, add record with phone number
; - CIDLOOKUP - Lookup CID to find record in whole system
; - CIDLOOKUPRL - Restrict lookup to one list
; - CIDLOOKUPRC - Restrict lookup to one campaign's lists
; - CLOSER - Closer calls from VICIDIAL fronters
; - ANI - ANI received, add record with phone number
; - ANILOOKUP - Lookup ANI to find record in whole system
; - ANILOOKUPRL - Restrict lookup to one list
; - 3DIGITID - Enter 3 digit code to go to agent
; - 4DIGITID - Enter 4 digit code to go to agent
; - 5DIGITID - Enter 5 digit code to go to agent
; - 10DIGITID - Enter 10 digit code to go to agent
; 2. the method of searching for an available agent:
; - LO - Load Balance Overflow only (priority to home server)
; - LB - <default> Load Balance total system
; - SO - Home server only
; 3. the full name of the IN GROUP to be used in vicidial for the inbound call
; 4. the phone number that was called, for the log entry
; 5. the callerID or lead_id of the person that called(usually overridden)
; 6. the park extension audio file name if used
; 7. the status of the call initially(usually not used)
; 8. the list_id to insert the new lead under if it is new (and CID/ANI available)
; 9. the phone dialing code to insert with the new lead if new (and CID/ANI available)
; 10. the campaign_id to search within lists if CIDLOOKUPRC
; inbound VICIDIAL call with CID delivery through T1 PRI
exten => 1234,1,Answer ; Answer the line
exten => 1234,2,AGI(agi-VDAD_ALL_inbound.agi,CID-----LB-----CL_GALLERIA-----7274515134-----Closer-----park----------999-----1)
exten => 1234,3,Hangup

; inbound VICIDIAL transfer calls [can arrive through PRI T1 crossover, IAX or SIP channel]
exten => _90009.,1,Answer ; Answer the line
exten => _90009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _90009.,3,Hangup
exten => _990009.,1,Answer ; Answer the line
exten => _990009.,2,AGI(agi-VDAD_ALL_inbound.agi,CLOSER-----LB-----CL_TESTCAMP-----7275551212-----Closer-----park----------999-----1)
exten => _990009.,3,Hangup


; barge monitoring extension
exten => 8159,1,ZapBarge
exten => 8159,2,Hangup

; ZapBarge direct channel extensions
exten => _86120XX,1,ZapBarge(${EXTEN:5})


exten => _X48600XXX,1,MeetMeAdmin(${EXTEN:2},T,${EXTEN:0:1})
exten => _X48600XXX,2,Hangup

exten => _X38600XXX,1,MeetMeAdmin(${EXTEN:2},t,${EXTEN:0:1})
exten => _X38600XXX,2,Hangup

exten => _X28600XXX,1,MeetMeAdmin(${EXTEN:2},m,${EXTEN:0:1})
exten => _X28600XXX,2,Hangup

exten => _X18600XXX,1,MeetMeAdmin(${EXTEN:2},M,${EXTEN:0:1})
exten => _X18600XXX,2,Hangup

exten => _55558600XXX,1,MeetMeAdmin(${EXTEN:4},K)
exten => _55558600XXX,2,Hangup
exten => 8300,1,Hangup

; astGUIclient conferences
exten => _86000[0-4]X,1,Meetme,${EXTEN}|q
; VICIDIAL conferences
exten => _86000[5-9]X,1,Meetme,${EXTEN}|F
exten => _86001XX,1,Meetme,${EXTEN}|F
exten => _8600200,1,Meetme,${EXTEN}|F
; quiet entry and leaving conferences for VICIDIAL
exten => _78600XXX,1,Meetme,${EXTEN:1}|Fq
; quiet monitor extensions for meetme rooms (for room managers)
exten => _68600XXX,1,Meetme,${EXTEN:1}|Fmq

; voicelab exten
exten => _86009XX,1,Meetme,${EXTEN}|Fmq
; voicelab exten moderator
exten => _986009XX,1,Meetme,${EXTEN:1}



; park channel for client GUI parking, hangup after 30 minutes
; create a GSM formatted audio file named "park.gsm" that is 30 minutes long
; and put it in /var/lib/asterisk/sounds
exten => 8301,1,Answer
exten => 8301,2,AGI(park_CID.agi)
exten => 8301,3,Playback(park)
exten => 8301,4,Hangup
exten => 8303,1,Answer
exten => 8303,2,AGI(park_CID.agi)
exten => 8303,3,Playback(conf)
exten => 8303,4,Hangup

; park channel for client GUI conferencing, hangup after 30 minutes
; create a GSM formatted audio file named "conf.gsm" that is 30 minutes long
; and put it in /var/lib/asterisk/sounds
exten => 8302,1,Answer
exten => 8302,2,Playback(conf)
exten => 8302,3,Hangup

exten => 8304,1,Answer
exten => 8304,2,Playback(ding)
exten => 8304,3,Hangup

; default audio for safe harbor 2-second-after-hello message then hangup
; create a GSM formatted audio file complies with safe harbor rules
; and put it in /var/lib/asterisk/sounds then change filename below
exten => 8307,1,Answer
exten => 8307,2,Playback(vm-goodbye)
exten => 8307,3,Hangup

; this is used for recording conference calls, the client app sends the filename
; value as a callerID recordings go to /var/spool/asterisk/monitor (WAV)
; Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8309,1,Answer
exten => 8309,2,Monitor(wav,${CALLERIDNAME})
exten => 8309,3,Wait,3600
exten => 8309,4,Hangup

; this is used for recording conference calls, the client app sends the filename
; value as a callerID recordings go to /var/spool/asterisk/monitor (GSM)
; Recording is limited to 1 hour, to make longer, just change the Wait,3600
exten => 8310,1,Answer
exten => 8310,2,Monitor(gsm,${CALLERIDNAME})
exten => 8310,3,Wait,3600
exten => 8310,4,Hangup

; this is used for playing a message to an answering machine forwarded from AMD in VICIDIAL
; replace conf with the message file you want to leave
exten => 8320,1,WaitForSilence(2000,2) ; AMD got machine. leave message after recording
exten => 8320,2,Playback(conf)
exten => 8320,3,AGI(VD_amd_post.agi,${EXTEN})
exten => 8320,4,Hangup

; use for selective CallerID hangup by area code(hard-coded)
exten => 8352,1,AGI(agi-VDADselective_CID_hangup.agi,${EXTEN})
exten => 8352,2,Playback(safe_harbor)
exten => 8352,3,Hangup

; prompts for recording AGI script, ID is 4321
; first variable is format (gsm/wav)
; second variable is timeout in milliseconds (default is 720000 [12 minutes])
exten => 8167,1,Answer
exten => 8167,2,AGI(agi-record_prompts.agi,wav-----720000)
exten => 8167,3,Hangup
exten => 8168,1,Answer
exten => 8168,2,AGI(agi-record_prompts.agi,gsm-----720000)
exten => 8168,3,Hangup

; playback of recorded prompts
exten => _851XXXXX,1,Answer
exten => _851XXXXX,2,Playback(${EXTEN})
exten => _851XXXXX,3,Hangup

; this is used to allow the GUI to send you directly into voicemail
; don't forget to set GUI variable $voicemail_exten to this extension
exten => 8501,1,VoicemailMain(s${CALLERIDNUM})
exten => 8501,2,Hangup

; this is used to allow the GUI to send live calls directly into voicemail
; don't forget to set GUI variable $voicemail_dump_exten to this extension
exten => _85026666666666.,1,Wait(2)
exten => _85026666666666.,2,Voicemail(${EXTEN:14})
exten => _85026666666666.,3,Hangup

; this is used for sending DTMF signals within conference calls, the client app
; sends the digits to be played in the callerID field
; sound files must be placed in /var/lib/asterisk/sounds
exten => 8500998,1,Answer
exten => 8500998,2,Playback(silence)
exten => 8500998,3,AGI(agi-dtmf.agi)
exten => 8500998,4,Hangup

;#### VDAD STANDARD TRANSFER ENTRIES ####
; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
exten => 8364,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8364,2,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
exten => 8364,5,Hangup

; VICIDIAL_auto_dialer transfer script:
exten => 8365,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8365,2,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
exten => 8365,5,Hangup

; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
exten => 8366,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8366,2,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
exten => 8366,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
exten => 8367,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8367,2,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
exten => 8367,5,Hangup

; VICIDIAL_auto_dialer transfer script Load Balanced:
exten => 8368,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8368,2,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8368,5,Hangup

; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
exten => 8369,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8369,2,AMD(2000|2000|1000|5000|120|50|4|256)
exten => 8369,3,AGI(VD_amd.agi,${EXTEN})
exten => 8369,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
exten => 8369,7,Hangup

; VICIDIAL auto-dial reminder script
exten => 8372,1,AGI(agi://127.0.0.1:4577/call_log)
exten => 8372,2,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
exten => 8372,5,Hangup

;#### VDAD SIP UNREGISTERED TRANSFER ENTRIES ####
;#### Use these entries IN PLACE OF the entries above if you are using SIP trunks
;#### and are not registering your provider in sip.conf
;; VICIDIAL_auto_dialer transfer script for no-agent campaigns:
;exten => 8364,1,Playback(sip-silence)
;exten => 8364,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8364,3,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,4,AGI(agi-VDADtransferBROADCAST.agi,${EXTEN})
;exten => 8364,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script:
;exten => 8365,1,Playback(sip-silence)
;exten => 8365,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8365,3,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,4,AGI(agi-VDADtransfer.agi,${EXTEN})
;exten => 8365,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script SURVEY at beginning:
;exten => 8366,1,Playback(sip-silence)
;exten => 8366,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8366,3,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,4,AGI(agi-VDADtransferSURVEY.agi,${EXTEN})
;exten => 8366,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balance Overflow:
;exten => 8367,1,Playback(sip-silence)
;exten => 8367,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8367,3,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,4,AGI(agi-VDAD_LO_transfer.agi,${EXTEN})
;exten => 8367,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script Load Balanced:
;exten => 8368,1,Playback(sip-silence)
;exten => 8368,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8368,3,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,4,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8368,5,Hangup
;
;; VICIDIAL_auto_dialer transfer script AMD with Load Balanced:
;exten => 8369,1,Playback(sip-silence)
;exten => 8369,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8369,3,AMD(2000|2000|1000|5000|120|50|4|256)
;exten => 8369,4,AGI(VD_amd.agi,${EXTEN})
;exten => 8369,5,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,6,AGI(agi-VDAD_LB_transfer.agi,${EXTEN})
;exten => 8369,7,Hangup
;
;; VICIDIAL auto-dial reminder script
;exten => 8372,1,Playback(sip-silence)
;exten => 8372,2,AGI(agi://127.0.0.1:4577/call_log)
;exten => 8372,3,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,4,AGI(agi-VDADautoREMINDER.agi,${EXTEN})
;exten => 8372,5,Hangup



; PERFORMANCE TESTING
exten => _999XXXXXX1,1,Answer
exten => _999XXXXXX1,2,Wait(2)
exten => _999XXXXXX1,3,Playback(beep)
exten => _999XXXXXX1,4,Hangup

exten => _999XXXX112,1,Wait(8)
exten => _999XXXX112,2,Answer
exten => _999XXXX112,3,Playback(demo-instruct)
exten => _999XXXX112,4,Playback(demo-instruct)
exten => _999XXXX112,5,Hangup

exten => _999XXXXXX2,1,Wait(8)
exten => _999XXXXXX2,2,Answer
exten => _999XXXXXX2,3,Playback(demo-instruct)
exten => _999XXXXXX2,4,Hangup

exten => _999XXXXXX3,1,SetVar(PRI_CAUSE=1)
exten => _999XXXXXX3,2,Hangup

exten => _999XXXXXX4,1,SetVar(PRI_CAUSE=27)
exten => _999XXXXXX4,2,Hangup

exten => _999XXXXXX5,1,Wait(60)
exten => _999XXXXXX5,2,Hangup

exten => _999XXXXXX6,1,Wait(10)
exten => _999XXXXXX6,2,Answer
exten => _999XXXXXX6,3,Playback(demo-instruct)
exten => _999XXXXXX6,4,Hangup

exten => _999XXXXXX7,1,Wait(12)
exten => _999XXXXXX7,2,Answer
exten => _999XXXXXX7,3,Playback(demo-enterkeywords)
exten => _999XXXXXX7,4,Hangup

exten => _999XXXXXX8,1,SetVar(PRI_CAUSE=17)
exten => _999XXXXXX8,2,Hangup

exten => _999XXXXXX9,1,Wait(6)
exten => _999XXXXXX9,2,Answer
exten => _999XXXXXX9,3,Playback(demo-abouttotry)
exten => _999XXXXXX9,4,Hangup

exten => _999XXXXXX0,1,Wait(5)
exten => _999XXXXXX0,2,Answer
exten => _999XXXXXX0,3,Playback(vm-goodbye)
exten => _999XXXXXX0,4,Hangup

exten => 99999999999,1,Answer
exten => 99999999999,2,Playback(conf)
exten => 99999999999,3,Playback(conf)
exten => 99999999999,4,Playback(conf)
exten => 99999999999,5,Playback(conf)
exten => 99999999999,6,Playback(conf)
exten => 99999999999,7,Playback(conf)
exten => 99999999999,8,Playback(conf)
exten => 99999999999,9,Playback(conf)
exten => 99999999999,10,Playback(conf)
exten => 99999999999,11,Playback(conf)
exten => 99999999999,12,Playback(conf)
exten => 99999999999,13,Playback(conf)
exten => 99999999999,14,Hangup

XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX

so now I register my xlite with extension 2000 and it registers fine but it doesn't make a call

Thanks for you help

[williamconley]

-- Executing Dial("Local/8600051@default-6e5e,1", "Zap/g1/16193642222||tTo") in new stack
Nov 30 17:07:07 NOTICE[3874]: app_dial.c:1076 dial_exec_full: Unable to create channel of type 'Zap' (cause 0 - Unknown)

This is the issue, your outbound Zap telephone trunk would not seem to be set up.

Now: If you do not have a digium card installed, then your system is correct to reject this dial attempt, and you have not set your system up properly.

ZAP refers specifically to dialing out via a Digium Card installed in your box.

You should remember to make it a habit to post your hardware configuration and Vicidial Version number, this speeds up your help process quite a bit.