Page 1 of 1

cli-output

PostPosted: Mon Feb 02, 2009 8:19 am
by gina3002
hello

a problem:

i had an working loadbalancing system (two servers)

now it set it up new, everything is working only two things are wrong.
the vicidial/dtabase server shows nothing on the asterisk cli, i set it on "both" in the server configuration, and the phone number goes to the 2 second server but there is a "1" bevore the number.... like 109221... and this isn't ok.

so what is the problem with the cli? perhaps there is the "1" too so there is perhaps error. plz help me

installed version is vicidial 1.1 not the new one, asterisk 1.2.27
the second server has asterisk 1.2.16 and is working fine

PostPosted: Mon Feb 02, 2009 10:39 am
by gina3002
ok the "1"-problem is solved but the cli-problem is always here, so one cli output is coming when i start as agent i see the first registration and conference sequence, but the nothing happens, loadbalancing is working the scond server is dialing but on the vicidial system nothing happens nothing out nothing in???

please help...


here is the sreen -r form the vicidial server:

[root@vici astguiclient]# screen -r
There are several suitable screens on:
30656.ASTupdate (Detached)
30663.ASTlisten (Detached)
30659.ASTsend (Detached)
2603.ASTfastlog (Detached)
2601.ASTVDadapt (Detached)
2605.ASTVDautoFILL (Detached)
30437.ASTVDremote (Detached)
30434.ASTVDauto (Detached)
2651.asterisk (Detached)
Type "screen [-d] -r [pid.]tty.host" to resume one of them.

PostPosted: Mon Feb 02, 2009 11:30 am
by gina3002
it seems it's missing something, but i configured like the last time togehter with the loadbalancing doc...

PostPosted: Mon Feb 02, 2009 12:24 pm
by mflorell
Can you post Asterisk CLI output of this?

PostPosted: Mon Feb 02, 2009 12:38 pm
by gina3002
this is the problem the only output is when i am login on the agent webinterface and i am getting the call to my softphone, then i begin dialing and only on the second server i coudl see something nothing on 1 server and before i reinstalled the system i see on both servers outputs.
so on the first server i set trunk=0 because everthing should go to the second server, but the softphone is registered on the first server.

so the second server get the numbers from the first server but i thing nothing goes back to the first server when someone is on phone