vicidial.org

Hi,
I have installed vicidialnow successfully. I could not configure SIP trunk. I tried these settings throug admin section aswell as through shell using vi editor

etc/asterisk/sip.conf file

[trunk_1]
disallow=all
allow=ulaw
allow=alaw
type=friend
username=<username>
secret=<password>
host=<your_sip_provider>
dtmfmode=inband
qualify=1000
fromuser=<username>

and in the file etc/asterisk/extensions.conf

SIPtrunk=SIP/trunk_1

exten => _91NXXNXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91NXXNXXXXXX,2,Dial(${SIPtrunk}/${EXTEN:1},55,o)
exten => _91NXXNXXXXXX,3,Hangup

I am in UK and my when I register my SIP provider with my soft/sip phone, I can dial all UK number without dialing international and country codes. To dial a number I just dial like 01214348989 for local and 07888889899 for mobiles numbers. I configured EYBEAM SIP phone it is logged in and I loaded about 20 numbers in the leads. I logged into agent and my sip phone rings telling me I am only one logged in. When I dial any number from lead my soft phone message "I am sorry that's not a valid extension, please try again" I am sure there is something wrong in SIP configuration. Please help me to get this work.

Best regards,
Webgurru

You have to match your dial plan to numbers you a re dialing:
for 01214348989 you dialplan entry should something like this:
_90XXXXXXXXX but you need to dial 9 as prefix

and 9 should be add as prefix to your compaign

or _0NXXXXXXXX to dial without prefix 9

Hi Marcin,

Thanks for your quick reply. I did this change but no luck. Could you please look my lead file to import.

"PHONE CODE","PHONE NUMBER","FIRST NAME","LAST NAME","ADDRESS1","CITY","STATE","POSTAL CODE","COUNTRY CODE "
"1","1214862327","Home","BT","Test address 1","Test City 1","CA","12345","44"
"1","1216604706","Home","SIP","Test address 2","Test City 2","CA","12345","44"
"1","1375382403","Azam","Zulf","Test address 3","Test City 3","CA","12345","44"
"1","2085012835","Zulf","Home","Test address 4","Test City 4","CA","12345","44"
"1","1215555555","Test","Test","Test","Test","CA","12345","44"
"1","1214444444","Test","Test","Test","Test","CA","12345","44"
"1","1213333333","Test","Test","Test","Test","CA","12345","44"
"1","1215555678","Test","Test","Test","Test","CA","12345","44"
"1","1213456789","Test","Test","Test","Test","CA","12345","44"
"1","1215456876","Test","Test","Test","Test","CA","12345","44"
"1","1217646754","Test","Test","Test","Test","CA","12345","44"

Is there anything wrong with this CSV file to import.

Best regards,
Webgurru

a Phone code of 1 is North America, and those don't look like north american numbers. If you are dialing in the UK you need to use 44 or your GMT offsets will not be correct.

Hi,

Is there anyway to check if my SIPTRUNK is successfully registered?
Best regards,

Webgurru

sip show registry
sip show peers

It can take up to a minute for the changes you made on the web admin page to take effect. Login to your server and access the Asterisk CLI. Check if the changes you made were committed by running as Matt said "sip show registry" and "sip show peers".

Hi Mflorell,

I am sorry for this but from where I can see SIP registry and SIP peers. In Admin area under Admin->Carriers, it only show carriers list with Active Y or N.

Best regards,

Hi,

I manage to see SIP registry and peers. On asterisk CLI, I found a problem it's continuously trying to connect my SIP provider and displaying message Registration for 'my account provider name' timed out, trying again. I changed my SIP provider, I have three provider but with everyone asterisk shows same message. I can ping my SIP provider from server window. I can logon and make calls from all three provider using my IP and Soft phone with same setting as used in vicidialnow. Could anyone help me out this why my sip provider registration fails?

Best regards,

You did not mention that you have an registration string in place. Usually registration for the trunk is not a problem.

Hi,

I have register the sip account,

but calls are not going through....

My dial plan entry is :

exten => _0NXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _0NXXXXXXXX,2,Dial(${SIPtrunk}/${EXTEN:1},55,o)
exten => _0NXXXXXXXX,3,Hangup

I want to dial US with prefix " 1 "

is the dial plan correct or I am making some mistake?

I am getting 404 error when i tried to call form eyebeam.

I am not able to get any kind of error message on CLI...


any suggestion ?

Hello...

Now I am getting this message on my CLI

Jun 5 10:27:10 NOTICE[26487]: app_dial.c:1076 dial_exec_full: Unable to create channel of type 'SIP' (cause 3 - No route to destination)
== Everyone is busy/congested at this time (1:0/0/1)
-- Executing Hangup("SIP/cc101-b7b0cab8", "") in new stack
== Spawn extension (default, 12127773456, 3) exited non-zero on 'SIP/cc101-b7b0cab8'
-- Executing DeadAGI("SIP/cc101-b7b0cab8", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----3-----CHANUNAVAIL----------") in new stack

kddacraker wrote:Hi,

I have register the sip account,

but calls are not going through....

My dial plan entry is :

exten => _0NXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _0NXXXXXXXX,2,Dial(${SIPtrunk}/${EXTEN:1},55,o)
exten => _0NXXXXXXXX,3,Hangup

I want to dial US with prefix " 1 "

is the dial plan correct or I am making some mistake?

I am getting 404 error when i tried to call form eyebeam.

I am not able to get any kind of error message on CLI...


any suggestion ?

First, you need to make sure your sip is registered through asterisk cli. From your message, I am not sure you actually get the sig registered with your provider from your vicidial.
Second, you did not tell which country you were dialing from, US to US? or some country to US. That differ how the dial plan should be. If you are dialing from US to US, your normal string should be 1+area code + 7 digits phone number. So your dial plan should be _91NXXNXXXXXX. 9 is added for vicidial. If from other country to US, you should dial prefix to get out of your country + 1 + area code + 7 digits phone number. You can figure out the dial plan from US to US plan.
Hope this help.