vicidial.org

Posted: **Fri Aug 14, 2009 6:51 am**

My calls are going perfectly but all of a sudden I see an Error of authentication problem.

Is this due to asterisk ?

SIP/bhub7-09bc3b10 is ringing
-- SIP/bhub7-09bc3b10 is making progress passing it to Local/71441274736637@default-f20c,2
-- SIP/bhub7-09bc3b10 is ringing
-- SIP/bhub7-09bc3b10 is making progress passing it to Local/71441274736637@default-f20c,2
== Manager 'sendcron' logged off from 127.0.0.1
-- SIP/bhub7-09a07c48 is making progress passing it to Local/71441296589558@default-0f60,2
-- AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
-- Executing AGI("SIP/bhub7-09b3d4a8", "agi-VDAD_ALL_outbound.agi|NORMAL-----LB") in new stack
-- Launched AGI Script /var/lib/asterisk/agi-bin/agi-VDAD_ALL_outbound.agi
== Manager 'sendcron' logged off from 127.0.0.1
== Manager 'sendcron' logged off from 127.0.0.1
Aug 14 07:46:18 WARNING[2789]: chan_sip.c:9890 handle_response_invite: Forbidden - wrong password on authentication for INVITE to '"V0814074602000003510" <sip:0000000000@119.2.60.103>;tag=as7c273db5'
-- SIP/bhub7-099a8b70 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Executing Hangup("Local/71442086217588@default-73da,2", "") in new stack
== Spawn extension (default, 71442086217588, 3) exited non-zero on 'Local/71442086217588@default-73da,2'
-- Executing DeadAGI("Local/71442086217588@default-73da,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----21-----CONGESTION----------") in new stack
-- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
== Manager 'sendcron' logged off from 127.0.0.1
-- AGI Script agi-VDAD_ALL_outbound.agi completed, returning 0
-- Executing Goto("SIP/bhub7-09b3d4a8", "default|8600053|1") in new stack
-- Goto (default,8600053,1)
-- Executing MeetMe("SIP/bhub7-09b3d4a8", "8600053|F") in new stack
== Parsing '/etc/asterisk/manager.conf': Found
== Manager 'sendcron' logged on from 127.0.0.1
-- Executing AGI("Local/71441612822416@default-6cf3,2", "agi://127.0.0.1:4577/call_log") in new stack

Posted: **Fri Aug 14, 2009 8:37 pm**

so you're saying that you've been making calls for hours and "suddenly" the password stops working?

if so... ask your provider why they are rejecting the call. they may be sending that code back as a rejection reason even though the reason is something else (for which there is no code, presumably).

like ... "you should not be using 000000000 for your callerid" or "your ASR is too low, so we have to cut you off" or any one of a whole bunch of other magical reasons.

But at least verify THEY are rejecting the call, then find out why.

Posted: **Fri Aug 14, 2009 8:42 pm**

If my VOIP provider doesn't support CLI, can I still FORCE it from asterisk to send CLI ?

Posted: **Fri Aug 14, 2009 9:19 pm**

you mean callerid? you don't have to force it, it is set in the vicidial campaign. and yours seems to be set to 000000000

and to reply to "if they dont support" ... they either have to support it or have your callerid locked to a specific number. either way, YOU can send the callerid by setting it in the Campaign. whether THEY pass it through or change it to your "assigned" callerid is a different story, but i've never seen it changed, it's always a pass-through.

vicidial.org

Authentication Problem

Authentication Problem