PRI ERROR

[arunkoods]

HI mflorell,

I am using vicidial1.2 CE with sangoma PRI card and calls are going fine but i can see some error in the CLI when i reload .

********************************************

-- Loaded provisioning template 'default'
-- Reloading module 'chan_zap.so' (Zapata Telephony w/PRI)
== Parsing '/etc/asterisk/zapata.conf': Found
Dec 28 16:53:40 WARNING[4269]: chan_zap.c:11062 setup_zap: Ignoring pridialplan
Dec 28 16:53:40 WARNING[4269]: chan_zap.c:11062 setup_zap: Ignoring prilocaldialplan
Dec 28 16:53:40 WARNING[4269]: chan_zap.c:11062 setup_zap: Ignoring priindication
Dec 28 16:53:40 WARNING[4269]: chan_zap.c:11062 setup_zap: Ignoring switchtype
Dec 28 16:53:40 WARNING[4269]: chan_zap.c:11062 setup_zap: Ignoring signalling
-- Reconfigured channel 1, PRI Signalling signalling
-- Reconfigured channel 2, PRI Signalling signalling
-- Reconfigured channel 3, PRI Signalling signalling
-- Reconfigured channel 4, PRI Signalling signalling
-- Reconfigured channel 5, PRI Signalling signalling
-- Reconfigured channel 6, PRI Signalling signalling
-- Reconfigured channel 7, PRI Signalling signalling
-- Reconfigured channel 8, PRI Signalling signalling
-- Reconfigured channel 9, PRI Signalling signalling
-- Reconfigured channel 10, PRI Signalling signalling
-- Reconfigured channel 11, PRI Signalling signalling
-- Reconfigured channel 12, PRI Signalling signalling
-- Reconfigured channel 13, PRI Signalling signalling
-- Reconfigured channel 14, PRI Signalling signalling
-- Reconfigured channel 15, PRI Signalling signalling
-- Reconfigured channel 17, PRI Signalling signalling
-- Reconfigured channel 18, PRI Signalling signalling
-- Reconfigured channel 19, PRI Signalling signalling
-- Reconfigured channel 20, PRI Signalling signalling
-- Reconfigured channel 21, PRI Signalling signalling
-- Reconfigured channel 22, PRI Signalling signalling
-- Reconfigured channel 23, PRI Signalling signalling
-- Reconfigured channel 24, PRI Signalling signalling
-- Reconfigured channel 25, PRI Signalling signalling
-- Reconfigured channel 26, PRI Signalling signalling
-- Reconfigured channel 27, PRI Signalling signalling
-- Reconfigured channel 28, PRI Signalling signalling
-- Reconfigured channel 29, PRI Signalling signalling
-- Reconfigured channel 30, PRI Signalling signalling
vici*CLI> exit
[root@vici asterisk]#
***********************************************************

and my zapata.conf is

********************************************************8

;autogenerated by /usr/sbin/wancfg_zaptel do not hand edit
;autogenrated on 2009-11-21
;Zaptel Channels Configurations
;For detailed Zaptel options, view /etc/asterisk/zapata.conf.bak

[trunkgroups]

[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
pridialplan=unknown
prilocaldialplan=unknown
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
priindication=outofband
busydetect=yes
busycount=4
callprogress=yes
switchtype=euroisdn

;Sangoma A101 port 1 [slot:11 bus:3 span:1] <wanpipe1>
context=from-pstn
group=0
signalling=pri_cpe
channel =>1-15,17-31

**************************************************
Please tell me what may be the reason for the error in the cli
~

[gardo]

I don't see any errors. They're just warnings you can safely ignore.

[arunkoods]

thanks