vicidial.org

Hey guys!

My ut50 just arrived, my vicibox is already up for testing. Can anyone help me install it.

Thank you!

anyone??? really need this...thank you!

okay sure.. where do we begin?

thanks rrb555.
that's my issue...i don't know where and how to begin. redoing the whole server will be my last resort.
I searched all the forums but no luck.
my dialer is already up just need to add ut50 on it.

no luck...no one???
thanks any way.

Guys.
I think my installation failed because we are experiencing bad lines. Can someone PLEASE help me in installing this device.
Thank you.

maybe you can start by posting how you installed it when it failed,
use the command history or explain in detail what you did

Sorry for double posting, just need this to work.
I inserted UT50
ran modprobe wanpipe_voicetime
Edited Zap_Mod = wanpipe_voicetime
Then I ran all the sangoma trouble shooting steps on their website and all the results are ok..

cat /proc/dahdi/1
Span 1: WANVTIME/1 "WANVTIME/1 (source: wanpipe_voicetime) 1" (MASTER)

dahdi show status
Description Alarms IRQ bpviol CRC4
WANVTIME/1 (source: wanpipe_voicetime) UNCONFIGUR 0 0 0


dahdi_test
Opened pseudo dahdi interface, measuring accuracy...
99.996% 99.998% 99.996% 99.999% 99.997% 99.997% 99.998% 99.997%
99.999% 99.999% 99.996% 99.998% 99.997% 99.999% 99.999% 99.995%
99.997% 99.998% 99.999% 99.998% 99.996% 99.996% 99.999% 99.999%
99.997% 99.996% 99.997% 99.999% 99.999% 99.999% 99.995% 99.997%
99.998% 99.998% 99.997% 99.992% 99.999% 99.999% 100.000% 99.996%
99.996% 99.997% 99.998% 99.999% 99.999% 99.996% 100.000% 99.998%
99.998% 99.998% 99.996% 99.997% 99.999% 99.999% 99.999% 99.995%
99.997% 99.999% 99.999% 99.997% 99.994% 99.998% 99.998% 99.999%
99.999% 99.995% 99.998% 99.998% 100.000% 99.999% 99.993% 99.998%
99.998% 99.999% 99.997% 99.997% 99.997% 99.999% 99.999% 99.999%
99.996% 99.999% 99.997% 100.000% 99.997% 99.996% 99.996% 99.998%
99.999% 99.998% 99.996% 99.998% 99.998% 100.000% 99.997% ^C
--- Results after 95 passes ---
Best: 100.000 -- Worst: 99.992 -- Average: 99.997625, Difference: 100.002038

I don't i understand about zaptel support.

Please help.
Thank you.

http://www.vicidial.org/VICIDIALforum/viewtopic.php?f=4&t=25340 wrote:Support , Anybody,

Need your help with my sangoma voice time. I don't really know if I installed it correctly because we are having choppy lines. Even eyebeam to eyebeam.
Already confirmed that it is not a network problem because I have 2 providers. Already tried both.
Already searched google on how to install it on vicibox, no luck.

Please someone help.

It can still be a network problem, your internal network, check the respond-time and speed to both your carrier and your gateway and so on

maybe it has something to do with these two posts your the author to, because they didn't seam to be resolved:
935 rtcp read too short error
perl command consuming 100% cpu usage on TOP

I have not used ut50 but I've been looking around a little.
check if the wanpipe_voicetime-module is loaded with:
lsmod | grep wanpipe_voicetime

but I guess it is loaded and working because that dahdi_test seamed to work