Page 1 of 1

ViCi Box 5.0.0 error

PostPosted: Thu Jul 25, 2013 6:53 pm
by cspivey
I apologize if I posted this in the wrong area

While trying to install ViCi Dial 5.0.0 I get these errors after selecting to wipe the drive. The systems install ver 4 just fine, just not ver 5
/dev/disk/by-id/ata-ST2000DM001-9YN164_W1E2TEFW -> 0 MB
Need size: /squashed/Vicibox5.x86_64-5.0.0.raw -> 2564 MB
Noe enough space available for this image
rebootExcepttion: reboot in 120 sec...

Re: ViCi Box 5.0.0 error

PostPosted: Sat Jul 27, 2013 8:41 pm
by williamconley
describe the partitioning scheme it is trying to use, if you can.

moving to the vicibox board. 8-)

Re: ViCi Box 5.0.0 error

PostPosted: Sun Jul 28, 2013 9:07 am
by Kumba
Try the LiveCD instead of the Preload. The preload appears to be more finicky as to what hardware it is ran on. The LiveCD seems to just chug along fine.

Also, the preload is over 700 megs so if you tried to burn it to a CD-Rom it may not have burned correctly. You would want to use a DVD for burning it.

Re: ViCi Box 5.0.0 error

PostPosted: Tue Jul 30, 2013 12:07 pm
by cspivey
Thank you all, I did try the Live CD and it worked. I would have replied sooner, but I had to re cable three of our offices. :D

Re: ViCi Box 5.0.0 error

PostPosted: Tue Jul 30, 2013 2:04 pm
by Kumba
Make sure you read the ViciBox v.5.0 patch notes. There are some errors in ViciBox v.5.0.0 that need to be addressed. I should have v.5.0.1 up shortly.