Unable to write frame to channel

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Unable to write frame to channel

Postby hiadviser » Sun Aug 25, 2013 1:14 am

Hey everyone,

I am getting the following error when dialing out:
Call Congestion - Error 21 - Call Rejected

I am using JustgoVoip as my carrier and they keep telling me they can make calls just fine from their test account, whatever that means. But I have no solution to my issue. I even created a new server on a completely different network, just to make sure it wasn't anything firewall/network related. Still same issue.

Here is my Account Entry:
Code: Select all
[goautodial]
disallow=all
allow=gsm
allow=ulaw
allow=g729
type=friend
host=dal.justgovoip.com
dtmfmode=auto
context=trunkinbound
qualify=yes
insecure=very
nat=yes


and Dialplan Entry:
Code: Select all
exten => _91XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten => _91XXXXXXXXXX,2,Dial(SIP/${EXTEN:1}@goautodial,,tTo)
exten => _91XXXXXXXXXX,3,Hangup



Here is my Asterisk output when I start the call:
Code: Select all
= Manager 'sendcron' logged on from 127.0.0.1
    -- Executing [8600051@default:1] MeetMe("Local/8600051@default-adbf,2", "8600051|F") in new stack
    -- Executing [912109002999@default:1] AGI("Local/8600051@default-adbf,1", "agi://127.0.0.1:4577/call_log") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
    -- Executing [912109002999@default:2] Dial("Local/8600051@default-adbf,1", "SIP/12109002999@goautodial||tTo") in new stack
    -- Called 12109002999@goautodial
[Aug 25 06:09:00] NOTICE[4702]: chan_sip.c:13470 handle_response_invite: Failed to authenticate on INVITE to '"M8250609000000013584" <sip:4699167596@192.237.166.57>;tag=as38e957fc'
    -- SIP/goautodial-00000006 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)
    -- Executing [912109002999@default:3] Hangup("Local/8600051@default-adbf,1", "") in new stack
  == Spawn extension (default, 912109002999, 3) exited non-zero on 'Local/8600051@default-adbf,1'
    -- Executing [h@default:1] DeadAGI("Local/8600051@default-adbf,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----21-----CONGESTION----------") in new stack
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----21-----CONGESTION---------- completed, returning 0
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:00] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2


Then It keeps repeating that line over and over and over until I close the Call Rejected error and hangup the phone
Then the log looks like this:

Code: Select all
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-adbf,2'
    -- Executing [h@default:1] DeadAGI("Local/8600051@default-adbf,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Spawn extension (default, 58600051, 1) exited non-zero on 'Local/58600051@default-f00b,2'
    -- Executing [h@default:1] DeadAGI("Local/58600051@default-f00b,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600051@default-f00b,1'
    -- Executing [h@default:1] DeadAGI("Local/58600051@default-f00b,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1



So, I am stuck. Anyone had this problem before or where to go from here? I appreciate any help in advance. Thank you.
ViciDial VERSION: 2.14-583a | BUILD: 161226-2224 | Asterisk 11.22.0-vici | Cluster Setp - 3 Web, 1 DB| No Digium/Sangoma Hardware | No Extra Software | HP ProLiant DL360 G6, 48GB RAM, 16 x Intel Xeon X5550 2.67GHz, 480GB SSD
hiadviser
 
Posts: 71
Joined: Wed Dec 05, 2012 9:29 am

Re: Unable to write frame to channel

Postby gardo » Mon Aug 26, 2013 4:34 pm

Please post your /etc/astguiclient.conf here. Your VARserver_ip variable might be different from your actual IP address. Happened to us before on a cluster with lots of Vicidial servers.

Code: Select all
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
[Aug 25 06:09:48] WARNING[7978]: app_meetme.c:2463 conf_run: Unable to write frame to channel Local/8600051@default-adbf,2
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Spawn extension (default, 8600051, 1) exited non-zero on 'Local/8600051@default-adbf,2'
    -- Executing [h@default:1] DeadAGI("Local/8600051@default-adbf,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Spawn extension (default, 58600051, 1) exited non-zero on 'Local/58600051@default-f00b,2'
    -- Executing [h@default:1] DeadAGI("Local/58600051@default-f00b,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
  == Manager 'sendcron' logged off from 127.0.0.1
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Spawn extension (default, 8309, 3) exited non-zero on 'Local/58600051@default-f00b,1'
    -- Executing [h@default:1] DeadAGI("Local/58600051@default-f00b,1", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0---------------") in new stack
    -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----0--------------- completed, returning 0
  == Parsing '/etc/asterisk/manager.conf': Found
  == Manager 'sendcron' logged on from 127.0.0.1
  == Manager 'sendcron' logged off from 127.0.0.1


This is a different issue though:

Code: Select all
    -- Called 12109002999@goautodial
[Aug 25 06:09:00] NOTICE[4702]: chan_sip.c:13470 handle_response_invite: Failed to authenticate on INVITE to '"M8250609000000013584" <sip:4699167596@192.237.166.57>;tag=as38e957fc'
    -- SIP/goautodial-00000006 is circuit-busy
  == Everyone is busy/congested at this time (1:0/1/0)


Send me a PM or email me: demian @ goautodial.com. Let's get this fixed.
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004

Re: Unable to write frame to channel

Postby hiadviser » Mon Aug 26, 2013 4:40 pm

Thanks Gardo. They got it fixed, whatever the issue was. Not sure what they did, but it works now lol. Appreciate the help.
ViciDial VERSION: 2.14-583a | BUILD: 161226-2224 | Asterisk 11.22.0-vici | Cluster Setp - 3 Web, 1 DB| No Digium/Sangoma Hardware | No Extra Software | HP ProLiant DL360 G6, 48GB RAM, 16 x Intel Xeon X5550 2.67GHz, 480GB SSD
hiadviser
 
Posts: 71
Joined: Wed Dec 05, 2012 9:29 am

Re: Unable to write frame to channel

Postby gardo » Tue Aug 27, 2013 6:43 pm

That's great to hear. And don't forget to always run "yum update" to update your system. We just released an update to the GOautodial web applications earlier. Contains bug fixes and other features (see changelog.txt).
http://goautodial.com
Empowering the next generation contact centers
gardo
 
Posts: 1926
Joined: Fri Sep 15, 2006 10:24 am
Location: Manila, 1004


Return to Support

Who is online

Users browsing this forum: Majestic-12 [Bot] and 110 guests