Dial Plan issue

All installation and configuration problems and questions

Moderators: gerski, enjay, williamconley, Op3r, Staydog, gardo, mflorell, MJCoate, mcargile, Kumba, Michael_N

Dial Plan issue

Postby davesdatasystems » Mon Nov 25, 2013 4:42 pm

Ok, I am having to dial at way to many lines to keep my agents connected, and i been trying to figure out what is going on for a while, so i am now just going to post this in hopes that someone will see something i do not see.

Warning; CLI spam will be below:

But let me start with my dial plan;
[xcast]
host=38.102.250.50
type=friend
disallow=all
allow=ulaw
trustrpid=yes
sendrpid=yes
qualify=yes
insecure=port,invite
dtmfmode=rfc2833
canreinvite=no
nat=no
host=38.102.250.60
context=trunkinbound

exten=> _81XXXXXXXXXX,1,AGI(agi://127.0.0.1:4577/call_log)
exten=> _81XXXXXXXXXX,2,Dial(SIP/Xcast/${EXTEN:1},,tTr)
exten=> _81XXXXXXXXXX,3,Hangup

_________________________________________________________________________________________________________________________________


CLI: spam warning incoming ;

Verbosity is at least 21
[Nov 25 16:19:45] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:45] -- Got SIP response 503 "Carrier Service Unavailable" back from 38.102.250.60
[Nov 25 16:19:45] -- SIP/Xcast-00000350 is circuit-busy
[Nov 25 16:19:45] == Everyone is busy/congested at this time (1:0/1/0)
[Nov 25 16:19:45] -- Executing [818037710630@default:3] Hangup("Local/818037710630@default-d448,2", "") in new stack
[Nov 25 16:19:45] == Spawn extension (default, 818037710630, 3) exited non-zero on 'Local/818037710630@default-d448,2'
[Nov 25 16:19:45] -- Executing [h@default:1] DeadAGI("Local/818037710630@default-d448,2", "agi://127.0.0.1:4577/call_log--HVcauses--PRI-----NODEBUG-----34-----CONGESTION----------") in new stack
[Nov 25 16:19:46] -- AMD: Changed state to STATE_IN_SILENCE
[Nov 25 16:19:46] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:46] -- SIP/Xcast-00000355 is making progress passing it to Local/815734495464@default-7a70,2
[Nov 25 16:19:46] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:46] -- SIP/Xcast-00000381 is making progress passing it to Local/818037544137@default-678a,2
[Nov 25 16:19:46] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:46] -- SIP/Xcast-00000375 is making progress passing it to Local/818037507794@default-371a,2
[Nov 25 16:19:46] -- SIP/Xcast-0000037e is making progress passing it to Local/818034259366@default-d1e7,2
[Nov 25 16:19:46] -- SIP/Xcast-00000373 is making progress passing it to Local/818037547262@default-204d,2
[Nov 25 16:19:46] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:47] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:47] -- AMD: HUMAN: silenceDuration:1000 afterGreetingSilence:1000
[Nov 25 16:19:47] -- AGI Script agi://127.0.0.1:4577/call_log--HVcauses ... ---------- completed, returning 0
[Nov 25 16:19:47] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:47] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:47] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:47] == Manager 'sendcron' logged off from 127.0.0.1
[Nov 25 16:19:47] Found
[Nov 25 16:19:47] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:47] Found
[Nov 25 16:19:47] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:47] -- Executing [8369@default:4] AGI("SIP/Xcast-00000337", "VD_amd.agi|8369") in new stack
[Nov 25 16:19:47] -- Launched AGI Script /var/lib/asterisk/agi-bin/VD_amd.agi
[Nov 25 16:19:47] -- Executing [815737565929@default:1] AGI("Local/815737565929@default-8dfd,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:47] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:47] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:47] -- Executing [815737565929@default:2] Dial("Local/815737565929@default-8dfd,2", "SIP/Xcast/15737565929||tTr") in new stack
[Nov 25 16:19:47] -- Executing [818037351080@default:1] AGI("Local/818037351080@default-1a45,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:47] -- Called Xcast/15737565929
[Nov 25 16:19:47] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:47] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:47] -- Executing [818037351080@default:2] Dial("Local/818037351080@default-1a45,2", "SIP/Xcast/18037351080||tTr") in new stack
[Nov 25 16:19:47] -- Called Xcast/18037351080
[Nov 25 16:19:47] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:47] Found
[Nov 25 16:19:47] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:47] -- Executing [818037918011@default:1] AGI("Local/818037918011@default-c6e2,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:47] -- SIP/Xcast-00000378 is making progress passing it to Local/818032524529@default-0bc1,2
[Nov 25 16:19:47] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:47] -- SIP/Xcast-0000037d is making progress passing it to Local/818038293094@default-8040,2
[Nov 25 16:19:47] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:47] -- Executing [818037918011@default:2] Dial("Local/818037918011@default-c6e2,2", "SIP/Xcast/18037918011||tTr") in new stack
[Nov 25 16:19:47] -- Called Xcast/18037918011
[Nov 25 16:19:47] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:47] Found
[Nov 25 16:19:47] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:47] -- Executing [818037546631@default:1] AGI("Local/818037546631@default-63bb,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:47] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:47] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:47] -- Executing [818037546631@default:2] Dial("Local/818037546631@default-63bb,2", "SIP/Xcast/18037546631||tTr") in new stack
[Nov 25 16:19:47] -- Called Xcast/18037546631
[Nov 25 16:19:48] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:48] Found
[Nov 25 16:19:48] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:48] -- SIP/Xcast-00000386 is ringing
[Nov 25 16:19:48] -- Executing [815736742995@default:1] AGI("Local/815736742995@default-237d,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:48] == Parsing '/etc/asterisk/manager.conf': [Nov 25 16:19:48] Found
[Nov 25 16:19:48] == Manager 'sendcron' logged on from 127.0.0.1
[Nov 25 16:19:48] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:48] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:48] -- Executing [815736742995@default:2] Dial("Local/815736742995@default-237d,2", "SIP/Xcast/15736742995||tTr") in new stack
[Nov 25 16:19:48] -- Executing [815734315279@default:1] AGI("Local/815734315279@default-3736,2", "agi://127.0.0.1:4577/call_log") in new stack
[Nov 25 16:19:48] -- Called Xcast/15736742995
[Nov 25 16:19:48] -- AGI Script Executing Application: (EXEC) Options: (Set(_CAMPCUST=ALARMS))
[Nov 25 16:19:48] -- AGI Script agi://127.0.0.1:4577/call_log completed, returning 0
[Nov 25 16:19:48] -- Executing [815734315279@default:2] Dial("Local/815734315279@default-3736,2", "SIP/Xcast/15734315279||tTr") in new stack
[Nov 25 16:19:48] -- Called Xcast/15734315279
[Nov 25 16:19:48] WARNING[8140]: rtp.c:953 ast_rtcp_read: RTCP Read too short
[Nov 25 16:19:48] -- Got SIP response 503 "Carrier Service Unavailable" back from 38.102.250.60
[Nov 25 16:19:48] -- SIP/Xcast-00000372 is circuit-busy
[Nov 25 16:19:48] == Everyone is busy/congested at this time (1:0/1/0)
[Nov 25 16:19:48] -- Executing [815732213732@default:3] Hangup("Local/815732213732@default-1378,2", "") in new stack
[Nov 25 16:19:48] == Spawn extension (default, 815732213732, 3) exited non-zero on 'Local/815732213732@default-1378,2'
VICIBOX V10 installed via USB
VERSION: 2.14b0.5
BUILD: 220831-0850
Asterisk 13.38.2-vici
SVN: 3641 (at time of this signature edit)
Custom PC
No Extra Software After Installation
davesdatasystems
 
Posts: 132
Joined: Thu Aug 25, 2011 11:39 am

Re: Dial Plan issue

Postby williamconley » Sat Nov 30, 2013 8:58 pm

Code: Select all
Got SIP response 503 "Carrier Service Unavailable" back from 38.102.250.60

Change carriers to test that the carrier is actually the problem (as stated in this code snippet of yours ...). If you don't have a second carrier to switch easily and test, you should smack your IT person (I say this because I *Know* you're the IT person, LOL) and go get a second carrier so you can test!

This is something that you would normally change the carrier on, test for 5 minutes and if the problem resolves itself you would call the "bad" carrier and complain. If not, then you can go to "ok, have to actually fix this" mode instead. LOL

While we're here: THREE carriers is recommended if there are paychecks on the line. Seriously.

We charge $25 to hook up a new carrier for you, and can recommend several with NO monthly fees. So ... testing becomes almost Free and shunting to another server simplistic. 8-)
Vicidial Installation and Repair, plus Hosting and Colocation
Newest Product: Vicidial Agent Only Beep - Beta
http://www.PoundTeam.com # 352-269-0000 # +44(203) 769-2294
williamconley
 
Posts: 20258
Joined: Wed Oct 31, 2007 4:17 pm
Location: Davenport, FL (By Disney!)


Return to Support

Who is online

Users browsing this forum: Google [Bot] and 87 guests